France
HUTCHINSON S.A - CENTRE DE RECHERCHE
RUE GUSTAVE NOURRY BP 31, 45120, CHALETTE SUR LOING, France
COFRAC 1-1135ISO/IEC 17025Register refreshed 2026-11-06
- Accredited standards
- 35
- COFRAC certificate
- 1
- Site in our directory
- 1
COFRAC accredited scope
What this lab is accredited for
Our reading of the COFRAC scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 35 standard numbers and the 32 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO27
ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 34-2Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 48-2Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
ISO 48-4Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 188Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 812Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
ISO 815-1Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 899-1Plastics - Determination of creep behaviour - Part 1: Tensile creep
Show all 27
ISO 1133Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1817Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
ISO 1853Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
ISO 2285Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
ISO 2781Rubber, vulcanized or thermoplastic - Determination of density
ISO 2921Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
ISO 3384Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 4649Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO 4662Rubber, vulcanized or thermoplastic - Determination of rebound resilience
ISO 14125Fibre-reinforced plastic composites - Determination of flexural properties
ISO 14126Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction
ISO 14129Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
ISO 14130Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method
ISO 15113Rubber - Determination of frictional properties
ISO 527 series4
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-5Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
Other standards4
ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness
ASTM D2344
IEC 62631-3-1
IEC 62631-3-2
ISO 37; ISO 48-2; ISO 868; ASTM D 2240; ISO 48-4; ISO 34-1; ISO 34-2
ISO 178; ISO 179-1; ISO 899-1; ISO 2285
ISO 812; ISO 2921; ISO 1817; ISO 188; ISO 2781; ISO 1183-1; ISO 1853
ISO 3384; ISO 815-1; ISO 4662; ISO 4649; ISO 15113
ISO 1133; IEC 62631-3-1; IEC 62631-3-2
ISO 527-1; ISO 527-2; ISO 527-4; ISO 527-5; ISO 14125; ISO 14130; ASTM D2344; ISO 14126; ISO 14129
Read from the scope as published by COFRAC. Register refreshed 2026-11-06.
Scope as published by COFRAC
7 lines
COFRAC
ISO/IEC 17025
Active1-1135
Accredited scope, certificate 1-1135
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | - | MATERIAUX / MATERIAUX PLASTIQUES ET COMPOSITES A MATRICE ORGANIQUE; MATERIALS / PLASTIC MATERIALS AND ORGANIC COMPOSITESShow page textExtracted from the scope document; tables may not line up. View scope for the original. Convention N° 741
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 1/10
Section Laboratoires
ATTESTATION D’ACCREDITATION
ACCREDITATION CERTIFICATE
N° 1-1135 rév. 18
Le Comité Français d'Accréditation (Cofrac) atteste que :
The French Committee for Accreditation (Cofrac) certifies that :
HUTCHINSON SA
N° SIREN : 542051826
Satisfait aux exigences de la norme NF EN ISO/IEC 17025 : 2017
Fulfils the requirements of the standard
et aux règles d’application du Cofrac pour les activités d’analyses/essais/étalonnages en :
and Cofrac rules of application for the activities of testing/calibration in :
MATERIAUX / MATERIAUX PLASTIQUES ET COMPOSITES A MATRICE ORGANIQUE
MATERIALS / PLASTIC MATERIALS AND ORGANIC COMPOSITES
réalisées par / performed by :
HUTCHINSON S.A - CENTRE DE RECHERCHE
RUE GUSTAVE NOURRY
BP 31
45120 CHALETTE SUR LOING
et précisément décrites dans l’annexe technique jointe, à l’exclusion des activités réalisées dans les pays
listés dans le document GEN INF 16, dont la version en vigueur est disponible sur le site internet du Cofrac
(www.cofrac.fr).
and precisely described in the attached technical appendix , excluding activities performed in the countries listed in
the document GEN INF 16, the current version of which is available on our website (www.cofrac.fr).
L’accréditation suivant la norme internationale homologuée NF EN ISO/IEC 17025 est la preuve de la
compétence technique du laboratoire dans un domaine d’activités clairement défini et du bon
fonctionnement dans ce laboratoire d’un système de management adapté (cf. communiqué conjoint ISO-
ILAC-IAF en vigueur disponible sur le site internet du Cofrac www.cofrac.fr)
Accreditation in accordance with the recognised international standard NF EN ISO/IEC 17025 demonstrates the
technical competence of the laboratory for a defined scope and the proper operation in this laboratory of an
appropriate management system (see current Joint ISO -ILAC-IAF Communiqué available on Cofrac web site
www.cofrac.fr) .
Le Cofrac est signataire de l’accord multilatéral d’EA pour l’accréditation , pour les activités objets de la
présente attestation.
Cofrac is signatory of the European co -operation for Accreditation (EA) Multilateral Agreement for accreditation for
the activities covered by this certificate. | - |
| 2 | ISO 37; ISO 48-2; ISO 868; ASTM D 2240; ISO 48-4; ISO 34-1; ISO 34-2 | Caoutchouc vulcanisé ou thermoplastique; Plastiques et ébonite | - |
| 3 | ISO 3384; ISO 815-1; ISO 4662; ISO 4649; ISO 15113 | Caoutchouc vulcanisé ou thermoplastique; Caoutchouc | - |
| 4 | ISO 178; ISO 179-1; ISO 899-1; ISO 2285 | Plastique | - |
| 5 | ISO 527-1; ISO 527-2; ISO 527-4; ISO 527-5; ISO 14125; ISO 14130; ASTM D2344; ISO 14126; ISO 14129 | Plastique; Composites plastiques renforcés de fibres; Flat laminated | - |
| 6 | ISO 812; ISO 2921; ISO 1817; ISO 188; ISO 2781; ISO 1183-1; ISO 1853 | Caoutchouc vulcanisé; Caoutchouc vulcanisé ou thermoplastique; Caoutchouc vulcanisé, thermoplastique conducteur et dissipant, plastique conducteur | to 108 Ohm.cm |
| 7 | ISO 1133; IEC 62631-3-1; IEC 62631-3-2 | Plastique; Matériau isolant solide | See scope document |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in France
- RESCOLL - PESSACPESSAC · ~441 kmCOFRACShares 2 accredited test methodsISO 1183-1ISO 527-1
- ELANOVAVITRY-SUR-SEINE · ~91 kmCOFRACShares 1 accredited test methodISO 868
- CRITT MATÉRIAUX INNOVATION - CHARLEVILLE-MÉZIÈRESCHARLEVILLE-MEZIERES · ~243 kmCOFRACShares 1 accredited test methodISO 1183-1
- BUREAU VERITAS LABORATOIRES PESSACPESSAC · ~445 kmCOFRACShares 1 accredited test methodISO 527-1
Accreditation data refreshed from the COFRAC register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the COFRAC entry linked above.