Registers refreshed 2026-11-08.See refresh dates
Italy

LIMACORPORATE

Via Nazionale 52 - Fraz. Villanova, 33038, San Daniele del Friuli, Italy

Visit website
ACCREDIA 01865ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
18
ACCREDIA certificate
1
Site in our directory
1
ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 18 standard numbers and the 11 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM10
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials

Limits written next to it

ASTM E8/E8M-25 - solo/only Control

Written next to it on line 1 of ACCREDIA certificate 01865.

ASTM E1409
ASTM F1044
ASTM F1147
ASTM F1800
ASTM F1820Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular DevicesSome clausesExclusion

Limits written next to it

ASTM F1820-22 - escluso/except §8.3

Some clauses. Written next to it on line 1 of ACCREDIA certificate 01865.

ASTM F1820-22 - escluso/except §8.3

Exclusion. Written next to it on line 1 of ACCREDIA certificate 01865.

ASTM F1829
ASTM F1978
ASTM F2009Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
ASTM F2028

Limits written next to it

ASTM F2028-25a - solo/only Reverse

Written next to it on line 1 of ACCREDIA certificate 01865.

ISO4
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 7206-4Implants for surgery - Partial and total hip joint prostheses - Part 4: Determination of endurance properties and performance of stemmed femoral components
ISO 7206-6Implants for surgery - Partial and total hip joint prostheses - Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components
ISO 14879-1Implants for surgery - Total knee-joint prostheses - Part 1: Determination of endurance properties of knee tibial trays
ISO 11357 series3
ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
Other standards1
EN 1484Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

2 lines
ACCREDIA

ISO/IEC 17025

Active

01865

View scope

Accredited scope, certificate 01865

LineMethodMatrixRange
1USP-NF 2025 Issue 3 par 645; ASTM F1820-22; ASTM F1800-19e1; ISO 14879-1:2020; ISO 7206-4:2010/A1:2016; ISO 7206-6:2013; ASTM F2028-25a; ASTM F1829-23; ASTM F2009-25; USP-NF 2025 Issue 3 par 643 + UNI EN 1484:1999; ASTM E1409-13(2021); EN ISO 6508-1:2023; ISO 6508-1:2023; ASTM E8/E8M-25; WIN 07-1-216 rev4 2025Metal0.1 to 84 µS/cm
2ISO 11357-1:2023; ISO 11357-2:2020; ISO 11357-3:2025; USP-NF 2025 Issue 3 par 788; ASTM F1147-24; ASTM F1044-25; ASTM F1978-22Rivestimenti in calcio fosfato/Calcium phosphate coatings; Rivestimenti metallici/Metallic coatings; Rivestimenti metallici prodotti mediante processi di spruzzatura termica su superfici metalliche piane/Metallic coatings produced by thermal spray processes on flat metallic surfaces10 to 220 °C

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Via Nazionale 52 - Fraz. Villanova, San Daniele del Friuli, 33038, IT

46.16005, 13.01060

Open in Maps
← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.