Registers refreshed 2026-11-08.See refresh dates
United States

Brammer Standard Company

14603 Benfer Road, 77069, Houston, TX, United States

Visit website
A2LA 656.01A2LA 656.02ISO/IEC 17025ISO 17034Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Scope lines
6
A2LA certificates
2
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

We could not match the method references in this lab’s scope to published test standard numbers. The full scope as published is below.

Only this lab. Searches the method, matrix and range of each of the 6 scope lines.

A2LA certificate 656.01 · 3 lines

LineMethodMatrixRange
1ASTM: E415; E1086; E1999; E2209; E1251; E2994; E3047; ISO/IEC 17025:2017Metal-
2ASTM: E1019; E1409; E2575; E1447; E826Steel-
3ISO/IEC 17025:2017; ISO-ILAC-IAF Communiqué dated April 2017; IEC 17025--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

A2LA certificate 656.02 · 3 lines

LineMethodMatrixRange
1ISO 17034:2016Ferrous Metals (Solids, Chips, & Pins): Steels (Carbon Steels, Low alloy Steels, High alloy Steels, Cast Steels, Specialty Steels); Irons (White Irons, Cast Irons, Ductile Irons, Gray Iron, Nodular Iron); Nonferrous Metals (Solids & Chips): Aluminum Alloys, Copper Base Alloys, Cobalt Base Alloys, Nickel Base Alloys, Titanium Base Alloys, Zinc Base Alloys, Lead Base0.000001 to 100 %
2-Special Alloys (Solids, Chips, & Powders); Ores and Minerals (Iron Ore, Iron Ore Sinter); Metal Producing Materials & Byproducts (Ferroalloys, Silico-calcium, Slag); Metals Both Ferrous & Nonferrous
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

(A2LA Cert No. 0656.02) 12/16/2024 Page 2 of 2 Certified Reference Material/ Matrix or Artifact Concentration Ranges/ Properties Characterized Measurement Technique Special Alloys: (Solids, Chips, & Powders) Elemental Composition: Al to Zr (0.000001 to 100.00000) % Measurement by a network of qualified laboratories using a variety of methods of demonstrable accuracy Ores and Minerals: Iron Ore Iron Ore Sinter Metal Producing Materials & Byproducts: Ferroalloys Silico-calcium Slag Elemental Composition: Al to Zr (0.000001 to 100.00000) % Elemental Composition: Al to Zr (0.000001 to 100.00000) % Measurement by a network of qualified laboratories using a variety of methods of demonstrable accuracy Tensile Strength: (Metals Both Ferrous & Nonferrous) Yield Strength: 0 to Scale Max Ultimate Strength: 0 to Scale Max Reduction in Area: 0 to Scale Max Elongation: 0 to Scale Max Measurement by a network of qualified laboratories using a variety of methods of demonstrable accuracy Hardness: (Metals Both Ferrous & Nonferrous) Rockwell: 0 to Scale Max Brinell: 0 to Scale Max Vickers: 0 to Scale Max Measurement by a network of qualified laboratories using a variety of methods of demonstrable accuracy
0.000001 to 100 %
3ISO 17034:2016--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

14603 Benfer Road, Houston, TX, 77069, US

29.75894, -95.36770

Open in Maps

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.