Institut für Kunststofftechnologie und -recycling (IKTR) e.V.
Gewerbepark 3, 06369, Südliches Anhalt, Germany
- Accredited standards
- 11
- DAKKS certificates
- 2
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 11 standard numbers and the 11 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO8
ISO 178Plastics - Determination of flexural properties
ISO 179-2Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1133-2Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
ISO 15512Plastics - Determination of water content
ISO 527 series3
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
DIN EN ISO 178; DIN EN ISO 179 -2; DIN EN ISO 527 -1; DIN EN ISO 527 -2; DIN EN ISO 527 -3; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1183 -1
DIN EN ISO 11358 -1; DIN EN ISO 11357 -3; DIN EN ISO 15512
Read from the scope as published by DAKKS. Register refreshed 2026-10-23.
Scope as published by DAKKS
5 lines
ISO/IEC 17025
ActiveD-PL-23164-01-00
Accredited scope, certificate D-PL-23164-01-00
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | DIN EN ISO/IEC 17000 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
ISO/IEC 17025
ActiveD-PL-23164-01-01
Accredited scope, certificate D-PL-23164-01-01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | DIN EN ISO 178; DIN EN ISO 179 -2; DIN EN ISO 527 -1; DIN EN ISO 527 -2; DIN EN ISO 527 -3; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1183 -1 | Kunststoffe | - |
| 3 | DIN EN ISO 11358 -1; DIN EN ISO 11357 -3; DIN EN ISO 15512 | Kunststoffe | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.