Poland

Fabryka Taśm Transporterowych WOLBROM

ul. 1 Maja 100, 32-340, Wolbrom, Poland

PCA AB 169ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 13
PCA certificate: 1
Site in our directory: 1

PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 13 standard numbers and the 13 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO13

ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces

ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties

ISO 188Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests

ISO 252Conveyor belts - Adhesion between constitutive elements - Test methods

ISO 283Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method

ISO 284Conveyor belts - Electrical conductivity - Specification and test method

ISO 340Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method

ISO 583Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods

ISO 703Conveyor belts - Transverse flexibility (troughability) - Test method

ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

ISO 2781Rubber, vulcanized or thermoplastic - Determination of density

ISO 4589-2Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test

ISO 4649Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device

Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

3 lines

PCA

ISO/IEC 17025

Active

AB 169

The scope document we hold says it is valid until 2029-07-25.

View on PCA

Accredited scope, certificate AB 169

Line	Method	Matrix	Range
1	-	plastic and rubber products; other products Show page text Extracted from the scope document; tables may not line up. View scope for the original. PCA Zakres akredytacji Nr AB 169 Scope of accreditation No AB 169 ZAKRES AKREDYTACJI LABORATORIUM BADAWCZEGO SCOPE OF ACCREDITATION FOR TESTING LABORATORY Nr/No AB 169 wydany przez / issued by POLSKIE CENTRUM AKREDYTACJI 01-382 Warszawa, ul. Szczotkarska 42 Wydanie/Issue 28 z/of 27.06.2025 KIEROWNIK DZIAŁU AKREDYTACJI BADAŃ MECHANICZNYCH I FIZYCZNYCH MARIA SZAFRAN Niniejszy dokument jest załącznikiem do Certyfikatu Akredytacji Nr AB 169 z dnia 16.04.2020 r. Cykl akredytacji od 27.06.2025 r. do 25.07.2029 r. Status akredytacji oraz aktualność zakresu akredytacji można potwierdzić na stronie internetowej PCA www.pca.gov.pl This document is an annex to accreditation certificate No AB 169 of 16.04.2020 Accreditation cycle from 27.06.2025 to 25.07.2029 The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl Wydanie nr / Issue No 28, 27.06.2025 1/4 Nazwa i adres / Name and address FABRYKA TAŚM TRANSPORTEROWYCH WOLBROM S.A. LABORATORIUM ul. 1 Maja 100 32-340 Wolbrom Kod identyfikacyjny / Identification code ) Dziedzina i przedmiot badań / Field of testing and item: - E/21 - Badania elektryczne wyrobów z tworzyw sztucznych i gumy / Electrical tests of plastic and rubber products - H/21 - Badania ogniowe wyrobów z tworzyw sztucznych i gumy / Fire tests of plastic and rubber products - J/17; J/21 - Badania mechaniczne wyrobów z tworzyw sztucznych i gumy / Mechanical tests of plastic and rubber products, other products - N/21 - Badania właściwości fizycznych wyrobów z tworzyw sztucznych i gumy / Test of physical properties of plastic and rubber products Wersja strony/Page version: A ) Kod identyfikacyjny zgodnie z załącznikiem do dokumentu DAB -07 dostępnym na stronie interneto wej www.pca.gov.pl / The identification code according to the Annex to document DAB-07, available at PCA website www.pca.gov.pl AB 169	-
2	PN-ISO 37:2007+AC1:2008; PN-ISO 188:2000; PN-80/C-04238; PN-EN ISO 868:2005; PN-ISO 34-1:2007; PN-ISO 2781+AC1:1996; PN-ISO 4649:2007; PN-EN ISO 284:2013; PN-EN ISO 4589-2:2017-06	Wulkanizat gumowy, taśmy przenośnikowe, inne wulkanizowane wyroby gumowe	See scope document
3	PN-EN ISO 283:2023-10; PN-EN ISO 252:2023-09; CSN 26 0370:1987; PN-EN ISO 583: 2023-09; PN-ISO 188:2000; PN-EN ISO 252:2023-09; PN-EN ISO 703:2017-02; PN-EN ISO 340:2022-12; PN-93/C-05013	Taśmy przenośnikowe z rdzeniem tekstylnym; pasy pędne	to 100 kN

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

ul. 1 Maja 100, Wolbrom, 32-340, PL

50.38484, 19.75988

Open in Maps

← All accredited testing labs in Poland

Accreditation data refreshed from the PCA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.