ISP Institut für tragende Kunststoffkonstruktionen
Rheinstraße 7, 41836, Hückelhoven, Germany
- Accredited standards
- 13
- DAKKS certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 13 standard numbers and the 8 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO8
ISO 178Plastics - Determination of flexural properties
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 899-2Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
ISO 1172Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 14125Fibre-reinforced plastic composites - Determination of flexural properties
ISO 16012Plastics - Determination of linear dimensions of test specimens
EN5
EN 1013
EN 1873
EN 14963
EN 16153
EN 16240
ETAG 002 -3; EAD 220072 -00 -0401; EAD 22008 9-00 -0401; DIN EN ISO 178
DIN EN ISO 527 -1; DIN EN ISO 527 -2; DIN EN ISO 899 -2; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 14125; DIN EN ISO 16012; DIN EN 1013; DIN EN 1873; DIN EN 14963
EN 1873:2005; EN 14963:2006
DIN EN 16153; DIN EN 16240
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
5 lines
ISO/IEC 17025
ActiveD-PL-19827-01-00
Accredited scope, certificate D-PL-19827-01-00
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | - | WoodShow page textExtracted from the scope document; tables may not line up. View scope for the original. This certificate annex is only valid together with the written accreditation certificate and reflects the status as indicated by the
date of issue. The current status of any given scope of accreditation can be found in the directory of accredited bodies
maintained by Deutsche Akkreditierungsstelle GmbH at https://www.dakks.de.
Abbreviations used: see last page Page 1 of 5
This document is a translation. The definitive version is the original German annex to the accreditation certificate.
Deutsche Akkreditierungsstelle
Annex to the Accreditation Certificate D-PL-19827-01-00
according to DIN EN ISO/IEC 17025:2018
Valid from : 06.09.2024
Date of issue : 06.09.2024
Holder of accreditation certificate:
ISP Institut für tragende Kunststoffkonstruktionen GmbH
Rheinstraße 7, 41836 Hückelhoven
with the location
ISP Institut für tragende Kunststoffkonstruktionen GmbH
Rheinstraße 7, 41836 Hückelhoven
The testing laboratory meets the requirements of DIN EN ISO/IEC 17025:2018 to carry out the
conformity assessment activities listed in this annex. The testing laboratory meets additional legal and
normative requirements, if applicable, including those in relevant sectoral schemes, provided that
these are explicitly confirmed below.
The management system requirements of DIN EN ISO/IEC 17025 are written in the language relevant
to the operations of testing laboratories and they conform to the principles of DIN EN ISO 9001.
Mechanic-technological tests on bonded glass structures, prefabricated roofing accessories, roof
coverings and self-supporting translucent roof construction systems;
Testing of construction products (system of assessment and verification of constancy of
performance 3) within the scope of the Regulation (EU) No 305/2011 laying down harmonised
conditions for the marketing of construction products (Construction Products Regulation) | - |
| 2 | ETAG 002 -3; EAD 220072 -00 -0401; EAD 22008 9-00 -0401; DIN EN ISO 178 | bonded glass structures, prefabricated roofing accessories, roof coverings, self-supporting translucent roof construction systems, plastic sheets | - |
| 3 | DIN EN ISO 527 -1; DIN EN ISO 527 -2; DIN EN ISO 899 -2; DIN EN ISO 1172; DIN EN ISO 1183 -1; DIN EN ISO 14125; DIN EN ISO 16012; DIN EN 1013; DIN EN 1873; DIN EN 14963 | Plastics | - |
| 4 | DIN EN 16153; DIN EN 16240 | Light transmitting flat multiwall polycarbonate (PC) sheets; Light transmitting flat solid polycarbonate (PC) sheets | - |
| 5 | EN 1873:2005; EN 14963:2006 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in Germany
- iLF MagdeburgMagdeburg · ~390 kmDAKKSShares 3 accredited methods and materialsISO 178PlasticsWood
- Entwicklungs- und Prüflabor HolztechnologieDresden · ~526 kmDAKKSShares 3 accredited methods and materialsISO 178PlasticsWood
- UL International Germany GmbH Standort KrefeldKrefeld · ~47 kmDAKKSShares 2 accredited methods and materialsISO 178Plastics
- IKT - Institut für Unterirdische Infrastruktur gGmbH Prüfstelle für BauprodukteGelsenkirchen · ~82 kmDAKKSShares 2 accredited methods and materialsISO 178Plastics
- KIMW Prüf- und AnalyseLüdenscheid · ~100 kmDAKKSShares 2 accredited methods and materialsISO 178Plastics
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.