FindTestingLabs
Registers refreshed 2026-10-25.See refresh dates
Spain

DEKRA Testing and Certification, S.A.U.

Parque Tecnologico de Andalucia, C/ Severo Ochoa 2, Malaga, 29590, Spain, Malaga, Spain

ENAC 51/LE147ENAC 51/LE1399ENAC 51/LE2666and 1 moreISO/IEC 17025Register refreshed 2026-10-23
Part of the DEKRA group: 52 sites in our directory.
Request a quoteFree

We check which accredited labs can do it, starting with this one, and send you a short comparison within three working days: who can do it, how fast, and roughly at what cost.

  • No lab gets your contact details until you tell us which ones you want to hear from.
Accredited standards
301
ENAC certificates
3
A2LA certificate
1
Site in our directory
1
A2LA and ENAC accredited scope

What this lab is accredited for

Our reading of the A2LA and ENAC scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 301 standard numbers and the 105 official names we hold. When no standard matches, it searches the method text of every scope line.

ETSI68
ETSI EG 203 367
ETSI EN 300 086
ETSI EN 300 220-1
ETSI EN 300 220-2
ETSI EN 300 220-3-1
ETSI EN 300 220-3-2
ETSI EN 300 220-4
ETSI EN 300 296
ETSI EN 300 328Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum
ETSI EN 300 330Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
ETSI EN 300 422-1
ETSI EN 300 422-4
Show all 68
ETSI EN 300 433
ETSI EN 300 440
ETSI EN 301 357
ETSI EN 301 489-1
ETSI EN 301 489-3
ETSI EN 301 489-5
ETSI EN 301 489-6
ETSI EN 301 489-7
ETSI EN 301 489-9
ETSI EN 301 489-17
ETSI EN 301 489-19
ETSI EN 301 489-33
ETSI EN 301 489-52
ETSI EN 301 511Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
ETSI EN 301 893
ETSI EN 301 908-1
ETSI EN 301 908-2
ETSI EN 301 908-13
ETSI EN 301 908-25
ETSI EN 302 571
ETSI EN 303 345-1
ETSI EN 303 345-2
ETSI EN 303 345-3
ETSI EN 303 345-4
ETSI EN 303 413Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard for access to radio spectrum
ETSI EN 303 417
ETSI EN 303 645
ETSI TS 102 230-1
ETSI TS 102 859
ETSI TS 102 868
ETSI TS 102 869
ETSI TS 102 870
ETSI TS 102 871
ETSI TS 103 096
ETSI TS 103 191
ETSI TS 103 412
ETSI TS 103 428
ETSI TS 103 683
ETSI TS 103 701
ETSI TS 126 269
ETSI TS 131 121
ETSI TS 131 124
ETSI TS 134 121-1
ETSI TS 134 123-1
ETSI TS 136 521-1
ETSI TS 136 521-3
ETSI TS 136 521-4
ETSI TS 136 523-1
ETSI TS 138 124
ETSI TS 138 521-1
ETSI TS 138 521-3
ETSI TS 138 521-4
ETSI TS 138 523-1
ETSI TS 138 533
ETSI TS 151 010-1
ETSI TS 151 010-4
IEC31
IEC 60065-1
IEC 60204-1Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60255-26
IEC 60529Degrees of protection provided by enclosures (IP Code)

Certificate says EN 60529. Probably the same standard; not checked against the EN document.

IEC 60533
IEC 60745-1
IEC 60945Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
IEC 60950-1Information technology equipment - Safety - Part 1: General requirements+1 national

National versions in the same scope

AS/NZS 60950.1national version with changes

Identical and changed are as the national standards body lists them; we read that on 2026-10-06.

IEC 61010-1Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

Certificate says EN 61010-1. Probably the same standard; not checked against the EN document.

IEC 61373Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 61547Equipment for general lighting purposes - EMC immunity requirements

Certificate says EN 61547. Probably the same standard; not checked against the EN document.

IEC 61730-1
Show all 31
IEC 61730-2
IEC 62031
IEC 62108
IEC 62109-1
IEC 62109-2
IEC 62115
IEC 62209-1
IEC 62209-2
IEC 62233Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
IEC 62262
IEC 62311Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz)

Certificate says EN 62311. Probably the same standard; not checked against the EN document.

IEC 62321-3-1
IEC 62366-1
IEC 62368-1Audio/video, information and communication technology equipment - Part 1: Safety requirements+1 national

National versions in the same scope

AS/NZS 62368.1national version with changes

Identical and changed are as the national standards body lists them; we read that on 2026-10-06.

IEC 62368-3
IEC 62479Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
IEC 62493
IEC 62560
IEC 62841-1
IEC 61000 series26
IEC 61000-3-2Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-3-3Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 61000-3-11Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection
IEC 61000-3-12Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase

Certificate says EN 61000-3-12. Probably the same standard; not checked against the EN document.

IEC 61000-4-2Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

Certificate says EN 61000-4-3. Probably the same standard; not checked against the EN document.

IEC 61000-4-4Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 61000-4-5Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

Certificate says EN 61000-4-5. Probably the same standard; not checked against the EN document.

IEC 61000-4-6Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-8Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-10
IEC 61000-4-11Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
Show all 26
IEC 61000-4-12Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test
IEC 61000-4-16
IEC 61000-4-17
IEC 61000-4-18
IEC 61000-4-21
IEC 61000-4-29Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 61000-4-34
IEC 61000-4-39Electromagnetic compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test
IEC 61000-6-1Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
IEC 61000-6-2Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 61000-6-3Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments

Certificate says EN 61000-6-3. Probably the same standard; not checked against the EN document.

IEC 61000-6-4Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
IEC 61000-6-7
IEC 61000-6-8
EN23
EN 54-4
EN 54-16
EN 1789
EN 12015Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission
EN 12016
EN 15194
EN 16454
EN 17240
EN 41003
EN 50102
EN 50121-3-2Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
EN 50121-4Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus
Show all 23
EN 50130-4Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems
EN 50130-5
EN 50131-1
EN 50136-1
EN 50136-2
EN 50147-1
EN 50147-2
EN 50155Railway applications - Rolling stock - Electronic equipment
EN 50360
EN 50498Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
EN 50566
IEC 60335 series18
IEC 60335-1Household and similar electrical appliances - Safety - Part 1: General requirements

Certificate says EN 60335-1. Probably the same standard; not checked against the EN document.

IEC 60335-2-8Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
IEC 60335-2-9Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
IEC 60335-2-14
IEC 60335-2-15
IEC 60335-2-23
IEC 60335-2-24
IEC 60335-2-26
IEC 60335-2-27
IEC 60335-2-29
IEC 60335-2-30
IEC 60335-2-31
Show all 18
IEC 60335-2-40
IEC 60335-2-45
IEC 60335-2-52
IEC 60335-2-75
IEC 60335-2-82
IEC 60335-2-89
CISPR13
CISPR 11Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

Certificate says EN 55011. Probably the same standard; not checked against the EN document.

CISPR 12Vehicles, boats and devices with internal combustion engines or traction batteries - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

Certificate says EN 55012. Probably the same standard; not checked against the EN document.

CISPR 14-1Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

Certificate says EN 55014-1, IEC 55014-1. Probably the same standard; not checked against the EN document.

CISPR 14-2Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

Certificate says EN 55014-2, IEC 55014-2. Probably the same standard; not checked against the EN document.

CISPR 15Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

Certificate says EN 55015, IEC 55015. Probably the same standard; not checked against the EN document.

CISPR 16-2-1Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

Certificate says EN 55016-2-1. Probably the same standard; not checked against the EN document.

CISPR 16-2-3Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

Certificate says EN 55016-2-3. Probably the same standard; not checked against the EN document.

CISPR 20

Certificate says EN 55020. Probably the same standard; not checked against the EN document.

CISPR 22Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

Certificate says EN 55022. Probably the same standard; not checked against the EN document.

CISPR 24Information technology equipment - Immunity characteristics - Limits and methods of measurement

Certificate says EN 55024. Probably the same standard; not checked against the EN document.

CISPR 25Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers

Certificate says EN 55025, IEC 55025. Probably the same standard; not checked against the EN document.

CISPR 32Electromagnetic compatibility of multimedia equipment - Emission requirements

Certificate says EN 55032. Probably the same standard; not checked against the EN document.

CISPR 35Electromagnetic compatibility of multimedia equipment - Immunity requirements

Certificate says EN 55035. Probably the same standard; not checked against the EN document.

IEC 60598 series12
IEC 60598-1Luminaires - Part 1: General requirements and tests
IEC 60598-2-1

Certificate says IEC 598-2-1. Probably the same standard; not checked against the EN document.

IEC 60598-2-2
IEC 60598-2-3
IEC 60598-2-4
IEC 60598-2-5
IEC 60598-2-7
IEC 60598-2-8
IEC 60598-2-9
IEC 60598-2-10
IEC 60598-2-17
IEC 60598-2-22
IEC 60068 series11
IEC 60068-2-1Environmental testing - Part 2-1: Tests - Test A: Cold

Certificate says EN 60068-2-1. Probably the same standard; not checked against the EN document.

IEC 60068-2-2Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)

Certificate says EN 60068-2-6. Probably the same standard; not checked against the EN document.

IEC 60068-2-11Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
IEC 60068-2-14Environmental testing - Part 2-14: Tests - Test N: Change of temperature

Certificate says EN 60068-2-14. Probably the same standard; not checked against the EN document.

IEC 60068-2-27Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-30Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-38Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-52Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 60068-2-64Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

Certificate says EN 60068-2-64. Probably the same standard; not checked against the EN document.

IEC 60068-2-78Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
IEC 61558 series11
IEC 61558-1
IEC 61558-2-1
IEC 61558-2-2
IEC 61558-2-4
IEC 61558-2-5
IEC 61558-2-6
IEC 61558-2-7
IEC 61558-2-8
IEC 61558-2-12
IEC 61558-2-15
IEC 61558-2-23
ISO10
ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge
ISO 11197Medical supply units
ISO 13766-1Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions
ISO 13766-2Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety
ISO 14982Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
ISO 15408
ISO 20653Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
ISO/IEC 18045Information security, cybersecurity and privacy protection - Evaluation criteria for IT security - Requirements and methodology for IT security evaluation
ISO/IEC 19790Information security, cybersecurity and privacy protection - Security requirements for cryptographic modules
ISO/IEC 24759Information security, cybersecurity and privacy protection - Test requirements for cryptographic modules
ISO 11452 series10
ISO 11452-1Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
ISO 11452-3Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic (TEM) cell
ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
ISO 11452-5Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5: Stripline
ISO 11452-7Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection
ISO 11452-8Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
ISO 11452-9Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
ISO 11452-10Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range
ISO 11452-11Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber
IEC 60601 series9
IEC 60601-1-2Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests

Certificate says EN 60601-1-2. Probably the same standard; not checked against the EN document.

IEC 60601-1-6
IEC 60601-1-8
IEC 60601-1-11Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
IEC 60601-1-12
IEC 60601-2-5
IEC 60601-2-10
IEC 60601-2-22
IEC 60601-2-66
IEC 61326 series7
IEC 61326-1Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
IEC 61326-2-1Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
IEC 61326-2-2Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems
IEC 61326-2-3Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
IEC 61326-2-4
IEC 61326-2-5
IEC 61326-2-6Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical electrical equipment
IEC 61215 series6
IEC 61215-1
IEC 61215-1-1
IEC 61215-1-2
IEC 61215-1-3
IEC 61215-1-4
IEC 61215-2
IEC 61851 series6
IEC 61851-1
IEC 61851-21
IEC 61851-21-1
IEC 61851-21-2
IEC 61851-22
IEC 61851-23
IEC 60730 series5
IEC 60730-1Automatic electrical controls - Part 1: General requirements
IEC 60730-2-6
IEC 60730-2-7
IEC 60730-2-9
IEC 60730-2-15
ISO 11451 series4
ISO 11451-1Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
ISO 11451-2Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources
ISO 11451-3Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation
ISO 11451-4Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
EN 50491 series3
EN 50491-5-1
EN 50491-5-2
EN 50491-5-3
IEC 60118 series3
IEC 60118-0
IEC 60118-13
IEC 60118-15
IEC 61347 series3
IEC 61347-1
IEC 61347-2-2
IEC 61347-2-13
IEC 61439 series3
IEC 61439-1
IEC 61439-2
IEC 61439-7
IEC 63044 series3
IEC 63044-5-1
IEC 63044-5-2
IEC 63044-5-3
ISO 16750 series3
ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
ISO 16750-3Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads
ISO 16750-4Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
ISO 7637 series3
ISO 7637-1Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Vocabulary and general considerations
ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
Other standards10
ANSI C63.4American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
FCC MP-5 (February 1986)
FCC PART 15Radio Frequency Devices
RSS-102
RSS-119
RSS-133
RSS-220
RSS-247
RSS-GEN
VW 80000

Read from the A2LA scope document we downloaded on 2026-03-14. Read from the scope as published by ENAC. Register refreshed 2026-10-23.

Scope as published by A2LA and ENAC

144 lines
ENAC

ISO/IEC 17025

Active

51/LE147

View scope
ENAC

ISO/IEC 17025

Active

51/LE1399

View scope
ENAC

ISO/IEC 17025

Active

51/LE2666

View scope
A2LA

ISO/IEC 17025

Active

3350.01

The scope document we hold says it was valid until 2026-09-30. That date has passed, so our copy may be out of date. We downloaded it from the A2LA register on 2026-03-14. Check the A2LA register for the current scope.

View scope

Location

Parque Tecnologico de Andalucia, C/ Severo Ochoa 2, Malaga, 29590, Spain, Malaga, ES

36.72130, -4.42164

Open in Maps
← All accredited testing labs in Spain

Labs with overlapping accredited scope in Spain

Accreditation data refreshed from the A2LA register on and the ENAC register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.