United States

MP Components

8499 Centre Industrial Drive, 49315, Byron Center, MI, United States

A2LA 2247.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Scope lines: 3
A2LA certificate: 1
Site in our directory: 1

A2LA accredited scope

What this lab is accredited for

We found no published test standard numbers in this lab’s scope. The full scope as published is below.

Search this lab’s scope for a standard or test

Only this lab. Searches the method, matrix and range of each of the 3 scope lines.

A2LA certificate 2247.01 · 3 lines

Line	Method	Matrix	Range
1	-	Steel Show page text Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2247.01) 10/15/2024 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MP COMPONENTS INC. 8499 Centre Industrial Drive Byron Center, MI 49315 Randy Veldhouse Phone: 616 878 9710 MECHANICAL Valid To: October 31, 2026 Certificate Number: 2247.01 In recognition of the successful completion of the A2LA evaluation process accreditation is granted to this laboratory to perform the following dimensional testing 1, 5: I. Dimensional Testing 1 Parameter/Equipment Range CMC2, 4 (±) Comments 3D Measurements3 – Steel Aluminum Non-Metal Steel Aluminum Non-Metal Steel Aluminum Non-Metal Up to (40 × 60 × 35) in Up to (78 × 130 × 60) in Up to (40 × 60 × 35) in (390 + 46L) µin (400 + 57L) µin (410 + 120L) µin (790 + 39L) µin (790 + 50L) µin (790 + 110L) µin (420 + 45L) µin (420 + 57L) µin (440 + 120L) µin Bridge CMM (Scirocco 022) Gantry CMM (Alpha 042) Bridge CMM (Xcel 1294-608) Length3 – Outside Diameter Up to 3 in 0.0001 in Micrometers ____________________________________________ 1 This laboratory offers commercial dimensional testing service.	See scope document
2	Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2247.01) 10/15/2024 Page 2 of 2 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC uncertainty due to the behavior of the customer’s device and to influences from the circumstances of the specific calibration. 3 This test is not equivalent to that of a calibration. 4 In the statement of CMC, L represents the numerical value of the nominal length of the device measured in inches. 5 This scope meets A2LA’s P112 Flexible Scope Policy.
3	Extracted from the scope document; tables may not line up. View scope for the original. For the types of tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited MP COMPONENTS INC. Byron Center, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO- ILAC-IAF Communiqué dated April 2017). Presented this 15th day of October 2024. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 2247.01 Valid to October 31, 2026

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

8499 Centre Industrial Drive, Byron Center, MI, 49315, US

42.81431, -85.72790

Open in Maps

← All accredited testing labs in Michigan

← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.