Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung eingetragener Verein Fraunhofer-Einrichtung für lndividualisierte Medizintechnik IMTE Prüflabor für Additive Fertigung
Mönkhofer Weg 239a, 23562, Lübeck, Germany
- Accredited standards
- 1
- DAKKS certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 1 standard number and the 1 official name we hold. When no standard matches, it searches the method text of every scope line.
ISO 15708-3Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation
DIN EN ISO 15708-03:2019
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
2 lines
ISO/IEC 17025
ActiveD-PL-11140-35-01
Accredited scope, certificate D-PL-11140-35-01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | DIN EN ISO 15708-03:2019 | Bauteilen; metallischen und nichtmetallischen Objekten; additiv gefertigten Bauteilen | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.