Registers refreshed 2026-11-08.See refresh dates
United States

Ravago Manufacturing Americas

405 Park Tower Drive, 37355, Manchester, TN, United States

Visit website
A2LA 1181.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
31
A2LA certificate
1
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 31 standard numbers and the 18 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM16
ASTM D256
ASTM D523Standard Test Method for Specular Gloss
ASTM D618
ASTM D638Standard Test Method for Tensile Properties of PlasticsExclusion

Limits written next to it

ASTM D638 (Except Section A3)

Exclusion. Written next to it on line 1 of A2LA certificate 1181.01.

ASTM D638 (Except Section A3),

Exclusion. Written next to it on line 1 of A2LA certificate 1181.01.

ASTM D648
ASTM D789
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D1238
ASTM D1525
ASTM D2244
ASTM D3801
ASTM D5630
ASTM D6869
ASTM E168
ASTM E1131
ISO15
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 180Plastics - Determination of Izod impact strength
ISO 291Plastics - Standard atmospheres for conditioning and testing
ISO 306Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principlesExclusion

Limits written next to it

ISO 527-1, -2 (Except Section 10.4)

Exclusion. Written next to it on line 1 of A2LA certificate 1181.01.

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1218-75
ISO 3451-1Plastics - Determination of ash - Part 1: General methodsExclusion

Limits written next to it

ISO 3451-1, -4 (Except Section 6.4)

Exclusion. Written next to it on line 1 of A2LA certificate 1181.01.

ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
ISO 15512Plastics - Determination of water content

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

3 lines
A2LA

ISO/IEC 17025

Active

1181.01

The scope document we hold says it was valid until 2026-09-30. That date has passed, so our copy may be out of date. We downloaded it from the A2LA register on 2026-03-14. Check the A2LA register for the current scope.

View scope

Accredited scope, certificate 1181.01

LineMethodMatrixRange
1ASTM D256 (Method A); ISO 179-1; ISO 180; ASTM D523; ASTM D618; ISO 291; ASTM D638 (Except Section A3); ISO 527-1, -2 (Except Section 10.4); ASTM D648 (Method B); ISO 75-1, -2; ASTM D789-94 (Withdrawn 1998)*; ISO 1218-75 (Method B)* (Withdrawn 1997); ASTM D790; ISO 178; ASTM D792 (Method A); ISO 1183-1 (Method A); ASTM D1238 (Method A); ISO 1133-1, -2 (Procedure B); ASTM D2244; ASTM D3801; ASTM D5630-13 (Procedure B), (Withdrawn 2022)*; ISO 3451-1, -4 (Except Section 6.4)Plastics-
2ASTM D6869; ISO 15512 (Method B2); ISO 11357-1; ISO 11357-3; ISO 11358-1; ASTM E1131; ASTM E168; E1252; ASTM D1525; ISO 306Plastics-
3

Extracted from the scope document; tables may not line up. View scope for the original.

For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited RAVAGO MANUFACTURING AMERICAS Manchester, TN for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 18th day of December 2024. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 1181.01 Valid to September 30, 2026

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

405 Park Tower Drive, Manchester, TN, 37355, US

35.48320, -86.08873

Open in Maps
← All accredited testing labs in Tennessee
← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.