SpineServ GmbH & Co.KG
Soeflinger Strasse 100, Ulm, 89077, Germany, Ulm, Germany
Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.
Only the laboratory you pick gets your contact details. We ask the others without them.
Contact this laboratory
Work at SpineServ GmbH & Co.KG?
Claim this profile to keep it accurate.
Register record
- A2LARefreshed
- 5702.01Active
Accredited standards
11Our reading of the A2LA scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.
ISO
ISO 7206-2Implants for surgery - Partial and total hip joint prostheses - Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
ISO 7206-2; ASTM F2033; ISO 9626 Annex B, C & D; ISO 8536-4; ASTM F1929; ASTM F1980
ISO 8536-4Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed
ISO 7206-2; ASTM F2033; ISO 9626 Annex B, C & D; ISO 8536-4; ASTM F1929; ASTM F1980
ISO 9626Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods
ISO 7206-2; ASTM F2033; ISO 9626 Annex B, C & D; ISO 8536-4; ASTM F1929; ASTM F1980
ISO 21535Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants
ISO 14243-1; ISO 14243-3; ISO 14243-5; ISO 21535; ISO 21536; S14; S10
ISO 21536Non-active surgical implants - Joint replacement implants - Specific requirements for knee-joint replacement implants
ISO 14243-1; ISO 14243-3; ISO 14243-5; ISO 21535; ISO 21536; S14; S10
ASTM
ASTM F1929Name not checked yet
ISO 7206-2; ASTM F2033; ISO 9626 Annex B, C & D; ISO 8536-4; ASTM F1929; ASTM F1980
ASTM F1980Name not checked yet
ISO 7206-2; ASTM F2033; ISO 9626 Annex B, C & D; ISO 8536-4; ASTM F1929; ASTM F1980
ASTM F2033Name not checked yet
ISO 7206-2; ASTM F2033; ISO 9626 Annex B, C & D; ISO 8536-4; ASTM F1929; ASTM F1980
ISO 14243 series
ISO 14243-1Implants for surgery - Wear of total knee-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
ISO 14243-1; ISO 14243-3; ISO 14243-5; ISO 21535; ISO 21536; S14; S10
ISO 14243-3Implants for surgery - Wear of total knee-joint prostheses - Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
ISO 14243-1; ISO 14243-3; ISO 14243-5; ISO 21535; ISO 21536; S14; S10
ISO 14243-5Implants for surgery - Wear of total knee prostheses - Part 5: Durability performance of the patellofemoral joint
ISO 14243-1; ISO 14243-3; ISO 14243-5; ISO 21535; ISO 21536; S14; S10
Scope as published by A2LA
4 lines
ISO/IEC 17025
Active5702.01
The scope document we hold says it is valid until 2028-03-31.
Accredited scope, certificate 5702.01
| Line | Discipline | Method | Matrix | Range |
|---|---|---|---|---|
| 1 | mechanical | ISO 14243-1; ISO 14243-3; ISO 14243-5; ISO 21535; ISO 21536; S14; S10 | Surgical Implants and Prosthetics | - |
| 2 | mechanical | ISO 7206-2; ASTM F2033; ISO 9626 Annex B, C & D; ISO 8536-4; ASTM F1929; ASTM F1980 | Sphericity Implants for surgery Partial and total hip joint prostheses; Stainless steel needle tubing for the manufacture of medical devices; Infusion equipment for medical use; Packaging | -40 to 20000 °C; N; Nm; mm; deg; kN; % |
| 3 | mechanical | pTI-Weighing; pTI-Pressure Testing | - | 0 to 220000 mg; kg; kPa; Nm |
| 4 | mechanical | - | - | - |
Ranges are reproduced from the accredited scope document as published. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.