Registers refreshed 2026-11-08.See refresh dates
Germany

K. A. Schmersal GmbH & Co. KG

Möddinghofe 30, 42279, Wuppertal, Germany

DAKKS D-PL-12119-01-00ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
32
DAKKS certificate
1
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 32 standard numbers and the 20 official names we hold. When no standard matches, it searches the method text of every scope line.

IEC 61000 series11
IEC 61000-4-2Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

Certificate says EN 61000-4-3. Probably the same standard; not checked against the EN document.

IEC 61000-4-4Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 61000-4-5Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
IEC 61000-4-6Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-8Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-11Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
IEC 61000-4-16
IEC 61000-4-29Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 61000-6-1Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
IEC 61000-6-2Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 60068 series10
IEC 60068-2-1Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-2Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-11Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
IEC 60068-2-14Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-38Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-52Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 60068-2-64Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

Certificate says EN 60068-2-64. Probably the same standard; not checked against the EN document.

IEC 60068-2-68
IEC 60068-2-75
IEC 60947 series6
IEC 60947-1
IEC 60947-5-1
IEC 60947-5-2
IEC 60947-5-3
IEC 60947-5-4
IEC 60947-5-5
IEC4
IEC 60529Degrees of protection provided by enclosures (IP Code)
IEC 60695-2-11
IEC 60695-2-12
IEC 61131-6Some clauses

Limits written next to it

DIN EN 61131-6: 2013-10 Speicherprogrammierbare Steuerungen - Teil 6: Funktionale Sicherheit Only EMC Table 10/12a 61000-4-6

Some clauses. Written next to it on line 8 of DAKKS certificate D-PL-12119-01-00.

Other standards1
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

8 lines
DAKKS

ISO/IEC 17025

Active

D-PL-12119-01-00

View scope

Accredited scope, certificate D-PL-12119-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018 Gültig ab: 07; DIN EN 60947-1:2015- 09; ISO/IEC 17025:2018 Gültig ab: 07; EN ISO/IEC 17025:2018 Gültig ab: 07; EN 60947-1--
2DIN EN 60947-5-1: 2018-03 Niederspannungsschaltgeräte - Teil 5-1; DIN EN 60947-5- 2:2014-01 Niederspannungsschaltgeräte - Teil 5-2; DIN EN 60947-5- 3:2014-12 Niederspannungsschaltgeräte - Teil 5-3; DIN EN 60947-5- 4:2005-03 Niederspannungsschaltgeräte - Teil 5-4; DIN EN 60947-5-5: 2017-08 Niederspannungsschaltgeräte - Teil 5-5: Steuergeräte und Schaltelemente - Elektrisches NOT-AUS-Gerät mit mechanischer Verrastfunktion Prüfgrundsatz BG ETEM INSpG BG GS ET 14: 2015-05 Zusatzanforderungen für die Prüfung und Zertifizierung von Näherungsschaltern für Sicherheitsfunktionen INSpG BG GS ET 15: 2019-06--
3INSpG BG GS ET 19: 2019-06; INSpG BG GS ET 20: 2016-10; INSpG BG GS ET 26: 2014-03--
4DIN EN 60068-2- 1:2008-01 Umweltprüfungen-Teil 2-1; DIN EN 60068-2- 2:2008-05; DIN EN 60068-2- 6:2008-10; DIN EN 60068-2- 11:2000-02; DIN EN 60068-2- 14:2010-04Water-
5DIN EN 60068-2- 38:2010-06; DIN EN 60068-2- 52:2017-03 Umgebungseinflüsse - Teil 2-52; DIN EN 60068-2- 64:2009-04; DIN EN 60068-2- 68:1997-02 Umweltprüfungen-Teil 2; DIN EN 60068-2- 75:2015-08 Umgebungseinflüsse- Teil 2-75: Prüfungen - Prüfung Eh: Hammerprüfungen nur Prüfungen Eha und Ehb UMW IEC 60529:1989--
6DIN EN ISO 9227:2017-07 Korrosionsprüfungen in künstlichen Atmosphären - Salzsprühnebelprüfungen ISO 9227:2017; DIN EN 60695-2- 11:2014-11; DIN EN 60695-2- 12:2015-01 Prüfungen zur Beurteilung der Brandgefahr- Teil 2-12; ISO 9227:2017-07 Korrosionsprüfungen in künstlichen Atmosphären - Salzsprühnebelprüfungen ISO 9227:2017; EN ISO 9227:2017-07 Korrosionsprüfungen in künstlichen Atmosphären - Salzsprühnebelprüfungen ISO 9227:2017--
7DIN EN 61000-4- 2:2009-12 Teil 4-2: Prüf- und Messverfahren - Prüfung der Störfestigkeit gegen die Entladung statischer Elektrizität EMV IEC 61000-4-4:2012- 04 Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test DIN EN 61000-4- 4:2013-04 Teil 4-4: Prüf- und Messverfahren - Prüfung der Störfestigkeit gegen schnelle transiente elektrische Störgrößen/Burst EMV IEC 61000-4-5:2014; DIN EN 61000-4- 5:2019-03 Teil 4-5: Prüf- und Messverfahren - Prüfung der Störfestigkeit gegen Stoßspannungen EMV IEC 61000-4-6:2013- 10 Part 4-6; DIN EN 61000-4- 6:2014-08 Teil 4-6; DIN EN 61000-4- 8:2010-11; DIN EN 61000-4- 11:2019-06-to 150 kHz
8DIN EN 61000-4- 16:2016-10 Teil 4-16; DIN EN 61000-4- 29:2001-10; DIN EN 61000-6- 1:2007-10 Teil 6-1; DIN EN 61000- 4-3 nur im Unterauftrag EMV IEC 61000-6-2:2016- 08 Part 6 -2: Generic standards - Immunity standard for industrial environments IEC 61000-4-3 Extern only DIN EN 61000-6- 2:2006-03 Teil 6-2: Fachgrundnormen - Störfestigkeit für Industriebereiche DIN EN 61000- 4-3 nur im Unterauftrag 1; DIN EN 61131-6: 2013-10 Speicherprogrammierbare Steuerungen - Teil 6: Funktionale Sicherheit Only EMC Table 10/12a 61000-4-6--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Möddinghofe 30, Wuppertal, 42279, DE

51.29418, 7.25133

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.