Italy

AMPERLAB - Divisione di AMPER-AUTO

Strada Borgaretto 21/A, 10043, Orbassano, Italy

ACCREDIA 02300ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 9
ACCREDIA certificate: 1
Site in our directory: 1

ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 9 standard numbers and the 9 official names we hold. When no standard matches, it searches the method text of every scope line.

CISPR 25Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers

Certificate says EN 55025, IEC 55025. Probably the same standard; not checked against the EN document.

CISPR 32Electromagnetic compatibility of multimedia equipment - Emission requirements

Certificate says EN 55032. Probably the same standard; not checked against the EN document.

CISPR 35Electromagnetic compatibility of multimedia equipment - Immunity requirements

Certificate says EN 55035. Probably the same standard; not checked against the EN document.

ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only

ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge

ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure

ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods

ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

2 lines

ACCREDIA

ISO/IEC 17025

Active

02300

View scope

Accredited scope, certificate 02300

Line	Method	Matrix	Range
1	-	Apparecchiature elettriche ed elettroniche/Electric and electronic equipment Show page text Extracted from the scope document; tables may not line up. View scope for the original. AMPERLAB - Divisione di AMPER-AUTO S.r.l. UNI CEI EN ISO/IEC 17025:2018 Allegato al certificato di accreditamento n. 02300 rev. 1 del 16/12/2025 Strada Borgaretto 21/A 10043 Orbassano TO Revisione: 1 Sede A Data: 16/12/2025 pag. 1 di 2 ELENCO Prove Accreditate - Con Campo Fisso in Categoria: 0 Apparecchiature elettriche ed elettroniche/Electric and electronic equipment Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I Emissione di correnti armoniche/Harmonic currents emission Par 5.03 - Variazioni di alimentazione/Supply voltage variations, Par 5.04 - Sovratensione di alimentazione e tensione inversa/Supply over voltage and reverse voltage, Par 5.05 - Requisiti di compatibilità del sistema elettrico/Electrical system compatibility requirements, Par 5.06 - Emissione RF (disturbi emessi)/RF Emission (Emitted Disturbances), Par 5.07 - Emissioni transitorie condotte/Conducted transient emissions, Par 5.08 - Immunità RF/RF immunità, Par 5.09 - Immunità ai transitori/Transient immunity, Par 5.10 - Scarica elettrostatica (ESD)/Electrostatic discharge (ESD) - escluso/except Par. 5.5.5, 5.5.6, 5.5.7, 5.5.8, 5.8.3 e 5.9.4 Prova di immunità ad impulso/Surge immunity test - solo/only Impulsi 1,2/50 µs su porte di alimentazione (Ampiezza 500-4000V, impulso 1,2/50µs circuito aperto e 8/20µs cortocircuito, AC fino a 400V 50/60 Hz, DC fino a 200V, corrente: 16A monofase, 32A trifase) Prove di immunità a scariche di elettricità statica/Electrostatic discharge immunity test (Ampiezza 0,2-30 kV, scariche indirette e dirette, in aria e a contatto con reti 150pF/330Ω, 330pF/330Ω, 150pF/2000Ω, 330pF/2000Ω) Prove di immunità ai transitori - raffiche di impulsi elettrici veloci (burst)/Electrical fast transient - burst immunity test (Ampiezza 250-4000V, frequenza di ripetizione 5kHz o 100 kHz, AC fino a 400V 50/60 Hz, DC fino a 200V, corrente: fino a 16A monofase, 32A trifase) Variazioni di tensione, fluttuazioni di tensione e del flicker/Voltage changes, voltage fluctuations and flicker _ _ _ _ _ _ CEI EN 61000-3-2:2015 , CEI EN IEC 61000-3-2:2019/A1:2021, EN 61000-3-2:2006/A1:2009/A2:2009 , EN 61000-3-2:2014 , EN IEC 61000-3-2:2019 , EN IEC 61000-3-2:2019/A1:2021 , IEC 61000-3-2:2005/A1:2008/A2:2009 , IEC 61000-3-2:2014 , IEC 61000-3-2:2018/AMD1:2020 , IEC 61000-3-2:2018/AMD1:2020/AMD2:20 24 FCA CS.00054:2015 , FCA CS.00054:2018 CEI EN 61000-4-5:2016/A1:2018, EN 61000-4-5:1995/A1:2001 , EN 61000-4-5:2006 , EN 61000-4-5:2014/A1:2017, IEC 61000-4-5:1995/COR1:1995/AMD1:20 00 , IEC 61000-4-5:2005/COR1:2009 , IEC 61000-4-5:2014/AMD1:2017 CEI EN 61000-4-2:2011, EN 61000-4-2:1995/A1:1998/A2:2001 , EN 61000-4-2:2009, IEC 61000-4-2:1995/A1:1998/A2:2000 , IEC 61000-4-2:2008 CEI EN 61000-4-4:2013, EN 61000-4-4:2004/A1:2010 , EN 61000-4-4:2012, IEC 61000-4-4:2004/COR1:2006/COR2:20 07/AMD1:2010 , IEC 61000-4-4:2012 CEI EN 61000-3-3:2014/EC:2014/EC:2016/A1: 2020 , CEI EN 61000-3-3:2014/EC:2014/EC:2016/A1: 2020/A2:2022, EN 61000-3-3:1995/A1:2001/A2:2005 , EN 61000-3-3:2008 , EN 61000-3-3:2013 , EN 61000-3-3:2013/A1:2019/A2:2021 , EN 61000-3-3:2013/A1:2019/A2:2021/AC: 2022, IEC 61000-3-3:2008 , IEC 61000-3-3:2013/AMD1:2017/AMD2:20 21/COR1:2022 Apparecchiature industriali, scientifiche e medicali/Industrial, scientific and medical equipment Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I Prove di emissioni/Emissions tests - solo/only Gruppo 1 in un sito di prova (monofase fino a 16A e trifase fino a 32A) ed emissioni irradiate di apparecchiature da tavolo da 30 a 1000 MHz in FAR solo dall'edizione EN 55011:2016/A1:2017 _ CEI EN 55011:2018/A1:2019/A11:2020/A2:20 21, CISPR 11:2003/A1:2004/A2:2006 , CISPR 11:2009/A1:2010 , CISPR 11:2015/AMD1:2016/AMD2:2019 , EN 55011:2009/A1:2010 , EN 55011:2016/A1:2017/A11:2020/A2:20 21	-
2	CEI EN 55032:2015/EC:2018/A1:2021/A11:2020, CISPR 32:2015/Cor1:2016/AMD1:2019, EN 55032:2015/AC:2016/A1:2020/A11:2020; CEI EN 55035:2018/A11:2021, CISPR 35:2016, EN 55035:2017/A11:2020, EN 55035:2017/AC:2019; CEI EN 55025:2017/EC:2018, CISPR 25:2002/Cor 1:2004 , CISPR 25:2008/Cor 1:2009 , CISPR 25:2016/Cor 1:2017 , CISPR 25:2021, EN 55025:2008 , EN 55025:2017/AC1:2017 , EN IEC 55025:2022; UNECE 10R06/01 (2020) , UNECE 10R06/02 (2022) , UNECE 10R06/03 (2024); ISO 7637-2:2004/Amd1:2008 , ISO 7637-2:2011; ISO 10605:2008/EC1:2010/A1:2014 , ISO 10605:2023; ISO 11452-4:2005/Cor.1:2009 , ISO 11452-4:2011 , ISO 11452-4:2020; ISO 11452-2:2004 , ISO 11452-2:2019; ISO 7637-3:2007 , ISO 7637-3:2016; ISO 16750-2:2006 , ISO 16750-2:2010 , ISO 16750-2:2012 , ISO 16750-2:2023	Apparecchiature multimediali/Multimedia equipment; Dispositivi elettrici ed elettronici per applicazione veicolistiche/Electrical and electronic applications for vehicular; Veicoli stradali: Carichi elettrici /Road vehicles: Electrical loads	See scope document

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Strada Borgaretto 21/A, Orbassano, 10043, IT

45.00775, 7.59176

Open in Maps

← All accredited testing labs in Italy

Accreditation data refreshed from the ACCREDIA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.