Fastenal Company Laboratory-Malaysia
16, Jalan Mega 1/7 Taman Perindustrian Nusa Cemerlang, 79200 Iskandar Puteri, Johor, Malaysia, 79200 Iskandar Puteri, Johor, Malaysia
Visit website- Accredited standards
- 14
- A2LA certificate
- 1
- Sites in our directory
- 2
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 14 standard numbers and the 9 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM7
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A956
ASTM A962
ASTM B117Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM B499
ASTM F788
ASTM F835
ISO6
ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 3506-1Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes
ISO 4759-1Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 8749Pins and grooved pins - Shear test
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
Other standards1
ASME B18.6.3Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)
ISO/IEC 17025:2017; ASTM A370; E18; F606/F606M; ISO 898-1; 898-2; ASTM A956; E384; E92; ISO 6507; 898-5; ASME B18.21.1; ISO 3506-1; ISO 8749; ASTM A962; DIN 267 Part 4 (1983); Part 15 (1983); SAE J995
DIN 267 Part 15 (1983); ASME B18.6.3; IFI Evaluating Stainless Screw on Tapping Screw; SAE J78, J933; ASTM F835, F912, F2328; ISO 898-1, 898-5; SAE J121 (1997), J419; SAE J423; ASTM F788/F788M; ASTM B117; ISO 9227; ASTM B499, B568; Niton Alloy Analyzer User’s Guide; ASME Y14.5
ASME B18.6.3; ASME B18.6.4 (1998); ASME B18.3; ASME 18.2.2; ISO 4759-1
Read from the A2LA scope document we downloaded on 2026-08-05. Register refreshed 2026-11-06.
Scope as published by A2LA
5 lines
ISO/IEC 17025
Active1046.05
The scope document we hold says it was valid until 2026-09-30. That date has passed, so our copy may be out of date. We downloaded it from the A2LA register on 2026-08-05. Check the A2LA register for the current scope.
Accredited scope, certificate 1046.05
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; ASTM A370; E18; F606/F606M; ISO 898-1; 898-2; ASTM A956; E384; E92; ISO 6507; 898-5; ASME B18.21.1; ISO 3506-1; ISO 8749; ASTM A962; DIN 267 Part 4 (1983); Part 15 (1983); SAE J995 | steel; stainless steel | - |
| 2 | DIN 267 Part 15 (1983); ASME B18.6.3; IFI Evaluating Stainless Screw on Tapping Screw; SAE J78, J933; ASTM F835, F912, F2328; ISO 898-1, 898-5; SAE J121 (1997), J419; SAE J423; ASTM F788/F788M; ASTM B117; ISO 9227; ASTM B499, B568; Niton Alloy Analyzer User’s Guide; ASME Y14.5 | - | - |
| 3 | ASME B1.3M, B1.16M/ B1.2; ASME B1.3M; ASME B1.3M, B1.16M; ASME B1.5; ASME B1.20.5; ASME B1.5; ASME B18.2.1; QA7M-114 | - | - |
| 4 | ASME B18.6.3; ASME B18.6.4 (1998); ASME B18.3; ASME 18.2.2; ISO 4759-1 | - | - |
| 5 | ISO/IEC 17025:2017 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Other Locations
1 other site in this organization
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.