Registers refreshed 2026-11-08.See refresh dates
Mexico

Frisa Forjados S.A DE C.V

Planta Santa Catarina, VALENTIN G. RIVERO #127 Col. Los Treviño, SANTA CATARINA, NUEVO LEON, MEXICO 66150, Mexico, SANTA CATARINA, NUEVO LEON, Mexico

Visit website
A2LA 3419.01ISO/IEC 17025Register refreshed 2026-11-06
One of 2 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
21
A2LA certificate
1
Sites in our directory
2
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 21 standard numbers and the 17 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM16
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A751
ASTM A892
ASTM B557
ASTM E3Standard Guide for Preparation of Metallographic Specimens
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E45Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E112Standard Test Methods for Determining Average Grain Size
ASTM E407Standard Practice for Microetching Metals and Alloys
ASTM E415Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM E562Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E1086Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM E1268
ISO5
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 4967Steel - Determination of the non-metallic inclusion content - Micrographic method
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

3 lines
A2LA

ISO/IEC 17025

Active

3419.01

The scope document we hold says it is valid until 2027-04-30.

View scope

Accredited scope, certificate 3419.01

LineMethodMatrixRange
1ASTM E23; ASTM A370; ISO 148-1; ASTM E10; ISO 6506-1; ASTM E18; ASTM A370; ASTM A370; ASTM B557/B557M; ASTM E8/E8M; ISO 6892-1; ASTM E112; ISO 643; ASTM E45; ISO 4967; ASTM E3; ASTM E407; ASTM E562; ASTM E407; ASTM A892; ASTM E1268Metallic Materials (Steel products)-
2ASTM A751; ASTM E415; ASTM E1086Carbon & Low Alloy Steel; Stainless Steel-
3

Extracted from the scope document; tables may not line up. View scope for the original.

For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited FRISA FORJADOS S.A DE C.V Santa Catarina, MEXICO for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 2nd day of May 2025. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 3419.01 Valid to April 30, 2027

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Planta Santa Catarina, VALENTIN G. RIVERO #127 Col. Los Treviño, SANTA CATARINA, NUEVO LEON, MEXICO 66150, Mexico, SANTA CATARINA, NUEVO LEON, MX

25.67451, -100.46164

Open in Maps

Other Locations

1 other site in this organization

Garcia, Nuevo Leon., MX
View

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.