Registers refreshed 2026-11-08.See refresh dates
Germany

Celanese Services Germany

Am Unisys-Park 1, 65843, Sulzbach (Taunus), Germany

DAKKS D-PL-20712-01-00ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
16
DAKKS certificate
1
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 16 standard numbers and the 11 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO11
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1133-2Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1628-5Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 3915Plastics - Measurement of resistivity of conductive plastics
ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
IEC3
IEC 60093
IEC 62631-3-1
IEC 62631-3-2
Other standards2
DIN 75201
EN 6042

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

4 lines
DAKKS

ISO/IEC 17025

Active

D-PL-20712-01-00

View scope

Accredited scope, certificate D-PL-20712-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018; DIN EN ISO 9001--
2DIN EN ISO 178; DIN EN ISO 179 -1; DIN EN ISO 527 -2; DIN EN ISO 1133 -1; DIN EN ISO 1133 -2; DIN EN ISO 1628 -5plastic moldings, billets and construction units-
3DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 1183 -1; IEC 60093; DIN EN 62631 -3-1; DIN EN 62631 -3-2; DIN EN 6042; ISO 3451 -1; DIN 75201; DIN EN ISO 3915Plastics-
4-polymers; polymer blends
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

Annex to the Accreditation Certificate D-PL-20712-01-00 Valid from : 13.06.20 25 Date of issue : 13.06.2025 Page 4 of 4 This document is a translation. The definitive version is the original German annex to the accreditation certificate. 5 Analytical tests CE 06 -01 -2200 -00 -01 Version 5 Determination of the mass fraction of acesulfame K by HPLC analysis CE 06 -01 -2200 -00 -09 Version 6 Determination of the loss on drying of acesulfame K using a moisture analyzer balance CE AA070 Version 7 Investigation of the morphology of polymers and polymer blends as well as their main molecular structure Abbreviations used: DIN German institute for standardization EN European Standard IEC International Electrotechnical Commission ISO International Organization for Standardization CE In-house method of Celanese Services Germany Gmb H
-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Am Unisys-Park 1, Sulzbach (Taunus), 65843, DE

50.13261, 8.52795

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.