Sweden

Teknos

Limmaredsvägen 2, 514 32, Tranemo, Sweden

SWEDAC A000545-001SWEDAC a000545-001ISO/IEC 17025Register refreshed 2026-11-08

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 9
SWEDAC certificates: 2
Site in our directory: 1

SWEDAC accredited scope

What this lab is accredited for

Our reading of the SWEDAC scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 9 standard numbers and the 9 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°

ISO 4624Paints and varnishes - Pull-off test for adhesion

ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering

ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting

ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking

ISO 4628-5Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking

ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect

ISO 11474Corrosion of metals and alloys - Corrosion tests in artificial atmosphere - Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)

ISO 19840Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces

Read from the scope as published by SWEDAC. Register refreshed 2026-11-08.

Scope as published by SWEDAC

2 lines

SWEDAC

ISO/IEC 17025

Active

A000545-001

View on SWEDAC

Accredited scope, certificate A000545-001

Line	Method	Matrix	Range
1	SS-EN ISO/IEC 17025:2018; SS-EN ISO 2813:2014; SS-EN ISO 11474:2014; SS-EN ISO 4628-2:2016; SS-EN ISO 4628-3:2024; SS-EN ISO 4628-4:2016; SS-EN ISO 4628-5:2022; SS-EN ISO 4628-8:2012; SS-ISO 19840:2012; SS-EN ISO 4624:2023	Färg och lack; Färg och lack; Färg och lack; Färg och lack; Färg och lack; Färg och lack; Färg och lack; Färg och lack; Färg och lack	-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

SWEDAC

ISO/IEC 17025

Active

a000545-001

View on SWEDAC

Accredited scope, certificate a000545-001

Line	Method	Matrix	Range
1	SS-EN ISO/IEC 17025:2018 Teknos AB Tranemo Ackrediteringsnummer 1685 Acklab A000545-001 Klimat- och milj; SS-EN ISO 2813:2014 F; SS-EN ISO 11474:2014 F; SS-EN ISO 4628-2:2016 F; SS-EN ISO 4628-3:2024 F	Färg och lack; Färg och lack; Färg och lack; Färg och lack; Färg och lack; Färg och lack; Färg och lack; Färg och lack; Färg och lack	-

Location

Limmaredsvägen 2, Tranemo, 514 32, SE

57.49589, 13.34085

Open in Maps

← All accredited testing labs in Sweden

Accreditation data refreshed from the SWEDAC register on 2026-11-08.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the SWEDAC entry linked above.