Freudenberg Flow Technologies
4535 Brittmoore Road, 77041, Houston, TX, United States
Visit website- Accredited standards
- 11
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 11 standard numbers and the 5 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM7
ASTM D297
ASTM D395
ASTM D412
ASTM D429
ASTM D471
ASTM D573
ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness
ISO4
ISO 10423Petroleum and natural gas industries - Drilling and production equipment - Wellhead and tree equipment
ISO 14310Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs
ISO 14998Petroleum and natural gas industries - Downhole equipment - Completion accessories
ISO 23936-1Oil and gas industries including lower carbon energy - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics
ISO/IEC 17025:2017; ASTM D429; ASTM D395 (Method B); ISO 14998 (Annex A and D); ASTM D471; ASTM D2240; ASTM D573; ISO 14310 (6.5); ISO 10423 (F1.11, F1.13); ISO 14310 (6.5); NORSOK M-710 (Annex B); ISO 23936-1 and -2 (Annex B); ASTM D412; ASTM D297, Section 16.3
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
2 lines
ISO/IEC 17025
Active3843.01
The scope document we hold says it is valid until 2027-10-31.
Accredited scope, certificate 3843.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; ASTM D429; ASTM D395 (Method B); ISO 14998 (Annex A and D); ASTM D471; ASTM D2240; ASTM D573; ISO 14310 (6.5); ISO 10423 (F1.11, F1.13); ISO 14310 (6.5); NORSOK M-710 (Annex B); ISO 23936-1 and -2 (Annex B); ASTM D412; ASTM D297, Section 16.3 | plastic and rubber seals and associated raw materials and test specimens | - |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
FREUDENBERG FLOW TECHNOLOGIES LLC
Houston, TX
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 25th day of August 2025.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 3843.01
Valid to October 31, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- Cal-TecBroussard, LA · ~331 kmA2LAShares 1 accredited test methodASTM D2240
- Technical Maintenance, Inc. - DallasDallas, TX · ~362 kmA2LAShares 1 accredited test methodASTM D2240
- MGA Research CorporationIrving, TX · ~373 kmA2LAShares 1 accredited test methodASTM D2240
- CROSS TECHNOLOGIES, INC - OKLAHOMA CITYOklahoma City, OK · ~666 kmA2LAShares 1 accredited test methodASTM D2240
- Probata CorporationEdmond, OK · ~685 kmA2LAShares 1 accredited test methodASTM D2240
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.