Amsler Testing
28364 South Western Ave # 439, 90275, Rancho Palos Verdes, CA, United States
- Accredited standards
- 1
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 1 standard number and the 0 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM E4
ASTM E4; SM 1312; ISO/IEC 17025:2017; IEC 17025; ANSI/NCSL Z540-1-1994
Read from the A2LA scope document we downloaded on 2025-12-02. Register refreshed 2026-11-06.
Scope as published by A2LA
3 lines
ISO/IEC 17025
Active1261.01
The scope document we hold says it is valid until 2027-07-31.
Accredited scope, certificate 1261.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM E4; SM 1312; ISO/IEC 17025:2017; IEC 17025; ANSI/NCSL Z540-1-1994 | - | 25 to 240000 lbf |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 1261.01) 05/15/2025 Page 2 of 2
3 Field calibration service is available for this calibration. Please note the actual measurement uncertainties
achievable on a customer's site can normally be expected to be larger than the CMC found on the A2LA
Scope. Allowance must be made for aspects such as the environment at the place of calibration and for
other possible adverse effects such as those caused by transportation of the calibration equipment. The
usual allowance for the actual uncertainty introduced by the item being calibrated, (e.g. resolution) must
also be considered and this, on its own, could result in the actual measurement uncertainty achievable on
a customer’s site being larger than the CMC. | ||
| 3 | ISO/IEC 17025:2017; ISO-ILAC-IAF Communiqué dated April 2017; IEC 17025; ANSI/NCSL Z540-1-1994 and R205 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- Qal-Tek AssociatesIdaho Falls, ID · ~1,214 kmA2LAShares 1 accredited test methodASTM E4
- Advanced Calibration Technologies, dba Ad-TekBoring, OR · ~1,343 kmA2LAShares 1 accredited test methodASTM E4
- MTS Systems Corporation - MTS Calibration OrganizationEden Prairie, MN · ~2,458 kmA2LAShares 1 accredited test methodASTM E4
- Braun Intertec CorporationBloomington, MN · ~2,464 kmA2LAShares 1 accredited test methodASTM E4
- Applied Technical Services, LLC.Bartlett, TN · ~2,608 kmA2LAShares 1 accredited test methodASTM E4
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.