Finland

A-Insinöörit Suunnittelu Oy, Teollisuus- ja talotekniikka - toimiala, Ympäristöyksikkö, Päästömittaustoiminta

Finland

FINAS T232ISO/IEC 17025Register refreshed 2026-11-06

One of 2 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 15
FINAS certificate: 1
Sites in our directory: 2

FINAS accredited scope

What this lab is accredited for

Our reading of the FINAS scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 15 standard numbers and the 14 official names we hold. When no standard matches, it searches the method text of every scope line.

EN12

EN 1911Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference methodSome clausesExclusion

Limits written next to it

SFS-EN 1911:2010 (excluding clause 6)

Some clauses. Written next to it on line 5 of FINAS certificate T232.

SFS-EN 1911:2010 (excluding clause 6)

Exclusion. Written next to it on line 5 of FINAS certificate T232.

EN 1948-1Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs

EN 1948-4

EN 12619Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method

EN 13211Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercuryExclusion

Limits written next to it

SFS-EN 13211+AC:2001 (Hg) (excluding

Exclusion. Written next to it on line 6 of FINAS certificate T232.

EN 13284-1Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method

EN 14181Stationary source emissions - Quality assurance of automated measuring systems

EN 14385Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and VExclusion

Limits written next to it

SFS-EN 14385:2024 (RM/HM) (excluding

Exclusion. Written next to it on line 6 of FINAS certificate T232.

EN 14789Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism

EN 14790Stationary source emissions - Determination of the water vapour in ducts - Standard reference method

EN 14792Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence

EN 15058Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry

ISO3

ISO 7935Stationary source emissions - Determination of the mass concentration of sulfur dioxide in flue gases - Performance characteristics of automated measuring systems

ISO 10780Stationary source emissions - Measurement of velocity and volume flowrate of gas streams in ducts

ISO 12039Stationary source emissions - Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas - Performance characteristics of automated measuring systems

Read from the FINAS scope document we downloaded on 2026-08-05. Register refreshed 2026-11-06.

Scope as published by FINAS

6 lines

FINAS

ISO/IEC 17025

Active

T232

The scope document we hold says it is valid until 2027-06-29.

View scope

Accredited scope, certificate T232

Line	Method	Matrix	Range
1	SFS-EN ISO/IEC 17025:2017	-	-
2	SFS-EN 14789:2017; ISO 12039:2019; SFS-EN 15058:2017; SFS-EN 14792:2017; CEN/TS 17021:2017; ISO 7935:2024; SFS-EN 13284-1:2017; SFS-EN 12619:2013; CEN/TS 13649:2015; SFS-EN 1911:2010; SFS 5789:1994; VDI 3878:2017; SFS-EN 1948-1:2006; SFS-EN 1948-4:2014; SFS-EN 14385:2024; SFS-EN 13211+AC:2001	Poistokaasu	See scope document
3	SFS-EN 14790:2017; ISO 10780:1994; SFS-EN 14181:2015; SFS-EN 14792:2017; CEN/TS 17021:2017; ISO 7935:2024; ISO 12039:2019; SFS-EN 14789:2017; SFS-EN 13284-1:2017	Poistokaasu	1 to 45 vol %
4	SFS-EN ISO/IEC 17025:2017	-	-
5	SFS-EN 14789:2017; ISO 12039:2019; SFS-EN 15058:2017; SFS-EN 14792:2017; CEN/TS 17021:2017; ISO 7935:2024; SFS-EN 13284-1:2017; SFS-EN 12619:2013; CEN/TS 13649:2015; SFS-EN 1911:2010; SFS 5789:1994; VDI 3878:2017; SFS-EN 1948-1:2006; SFS-EN 1948-4:2014	Exhaust gases from stationary sources	See scope document
6	SFS-EN 14385:2024; SFS-EN 13211+AC:2001; SFS-EN 14790:2017; ISO 10780:1994; SFS-EN 14181:2015; SFS-EN 14792:2017; CEN/TS 17021:2017; ISO 7935:2024; ISO 12039:2019; SFS-EN 14789:2017; SFS-EN 13284-1:2017	Exhaust gases from stationary sources	1 to 45 vol %

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Other Locations

1 other site in this organization

Espoo, FI

View

← All accredited testing labs in Finland

Accreditation data refreshed from the FINAS register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the FINAS entry linked above.