Teknor Apex - ETP Division
751 N. Dupree Avenue, 38012, Brownsville, TN, United States
Visit website- Accredited standards
- 32
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 32 standard numbers and the 21 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO18
ISO 62Plastics - Determination of water absorption
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 180Plastics - Determination of Izod impact strength
ISO 188Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 291Plastics - Standard atmospheres for conditioning and testing
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1133-2Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
Show all 18
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 3451-4Plastics - Determination of ash - Part 4: Polyamides
ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 15512Plastics - Determination of water content
ASTM14
ASTM D256
ASTM D570
ASTM D618
ASTM D638Standard Test Method for Tensile Properties of Plastics
ASTM D648
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D955
ASTM D1238
ASTM D3418
ASTM D3801
ASTM D5630
ASTM D6869
ASTM D7791
ASTM D256; ISO 180; ISO 179-1; ASTM D570; ISO 62; ASTM D618; ISO 291; ASTM D638; ISO 527-1; ISO 527-2; ASTM D648; ISO 75-1; ISO 75-2; ASTM D790; ISO 178; ASTM D792; ISO 1183-1; ASTM D955; ASTM D1238; ISO 1133-1; ISO 1133-2; ASTM D3418; ISO 11357-1; ISO 11357-3; ASTM D3801
ASTM D5630 (Procedure B); ISO 3451-1; ISO 3451-4; ASTM D6869; ISO 15512 (Method B); ISO 188; ASTM D7791 (Procedure A)
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
3 lines
ISO/IEC 17025
Active2799.01
The scope document we hold says it is valid until 2027-03-31.
Accredited scope, certificate 2799.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM D256; ISO 180; ISO 179-1; ASTM D570; ISO 62; ASTM D618; ISO 291; ASTM D638; ISO 527-1; ISO 527-2; ASTM D648; ISO 75-1; ISO 75-2; ASTM D790; ISO 178; ASTM D792; ISO 1183-1; ASTM D955; ASTM D1238; ISO 1133-1; ISO 1133-2; ASTM D3418; ISO 11357-1; ISO 11357-3; ASTM D3801 | Plastics | - |
| 2 | ASTM D5630 (Procedure B); ISO 3451-1; ISO 3451-4; ASTM D6869; ISO 15512 (Method B); ISO 188; ASTM D7791 (Procedure A) | Plastics | - |
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
TEKNOR APEX - ETP DIVISION
Brownsville, TN
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 5th day of May 2025.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 2799.01
Valid to March 31, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- Advanced Composites, Inc. Tennessee Facility - EngineeringNashville, TN · ~233 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
- Advanced Composites, Inc. Tennessee Facility - Main PlantNashville, TN · ~233 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
- Advanced Composites, Inc. Ohio Facility - EngineeringSidney, OH · ~687 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
- Riverview Calibration Services,Belpre, OH · ~792 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
- DatapointLabsIthaca, NY · ~1,334 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.