Registers refreshed 2026-11-08.See refresh dates
Poland

Instytut Technologii Bezpieczeństwa "Moratex"

ul. M. Skłodowskiej-Curie 3, 90-505, Łódź, Poland

PCA AB 154PCA AB 155PCA AB 1573ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
94
PCA certificates
3
Site in our directory
1
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 94 standard numbers and the 67 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO40
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 811Textiles - Determination of resistance to water penetration - Hydrostatic pressure test
ISO 845Cellular plastics and rubbers - Determination of apparent density
ISO 1421Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
ISO 1923Cellular plastics and rubbers - Determination of linear dimensions
ISO 2411Rubber- or plastics-coated fabrics - Determination of coating adhesion
ISO 3071Textiles - Determination of pH of aqueous extract
ISO 3801Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area
ISO 4045Leather - Chemical tests - Determination of pH and difference figure
ISO 4674-1Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods
ISO 4920Textile fabrics - Determination of resistance to surface wetting (spray test)
Show all 40
ISO 5077Textiles - Determination of dimensional change in washing and drying
ISO 5084Textiles - Determination of thickness of textiles and textile products
ISO 5088Textiles - Ternary fibre mixtures - Quantitative analysis
ISO 6940Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens
ISO 6941Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens
ISO 7768Textiles - Test method for assessing the smoothness appearance of fabrics after cleansing
ISO 7771Textiles - Determination of dimensional changes of fabrics induced by cold-water immersion
ISO 7854Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing
ISO 9237Textiles - Determination of the permeability of fabrics to air
ISO 9867Textiles - Evaluation of the wrinkle recovery of fabrics - Appearance method
ISO 11092Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
ISO 12945-1Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 1: Pilling box method
ISO 12945-2Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 2: Modified Martindale method
ISO 12947-2Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
ISO 12947-3Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss
ISO 13934-1Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13935-1Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method
ISO 13935-2Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method
ISO 13936-2Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method
ISO 14184-1Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method)
ISO 14362-1Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
ISO 14362-3Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
ISO 14389Textiles - Determination of the phthalate content - Tetrahydrofuran method
ISO 14419Textiles - Oil repellency - Hydrocarbon resistance test
ISO 15025Protective clothing - Protection against flame - Method of test for limited flame spread
ISO 17075-1Leather - Chemical determination of chromium(VI) content in leather - Part 1: Colorimetric method
ISO 20471High visibility clothing - Test methods and requirements
ISO 21420Protective gloves - General requirements and test methods
EN21
EN 388
EN 397
EN 863
EN 1049-2
EN 1063
EN 1150
EN 1522
EN 1523
EN 1624
EN 1625
EN 1734
EN 1773
Show all 21
EN 1875-3
EN 12127
EN 13726-2
EN 13726-3
EN 14971
EN 16711-1
EN 16711-2
EN 20811
EN 29865
ISO 105 series11
ISO 105-B02Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
ISO 105-C06Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering
ISO 105-D01Textiles - Tests for colour fastness - Part D01: Colour fastness to drycleaning using perchloroethylene solvent
ISO 105-E01Textiles - Tests for colour fastness - Part E01: Colour fastness to water
ISO 105-E02Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water
ISO 105-E04Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration
ISO 105-J01Textiles - Tests for colour fastness - Part J01: General principles for measurement of surface colour
ISO 105-J03Textiles - Tests for colour fastness - Part J03: Calculation of colour differences
ISO 105-X05Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents
ISO 105-X11Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing
ISO 105-X12Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
ISO 1833 series5
ISO 1833-4Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite)
ISO 1833-6Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride)
ISO 1833-7Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide with certain other fibres (method using formic acid)
ISO 1833-11Textiles - Quantitative chemical analysis - Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid)
ISO 1833-12Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide)
ISO 9073 series5
ISO 9073-1Nonwovens - Test methods - Part 1: Determination of mass per unit area
ISO 9073-2Textiles - Test methods for nonwovens - Part 2: Determination of thickness
ISO 9073-3Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method
ISO 9073-4Nonwovens - Test methods - Part 4: Determination of tear resistance by the trapezoid procedure
ISO 9073-5Nonwovens - Test methods - Part 5: Determination of resistance to mechanical penetration (ball burst procedure)
EN 1149 series3
EN 1149-1
EN 1149-2
EN 1149-3
ISO 13937 series3
ISO 13937-2Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
ISO 13937-3Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
ISO 13937-4Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)
ISO 2286 series3
ISO 2286-1Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass
ISO 2286-2Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 2286-3Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness
Other standards3
PN-P-04613
PN-V-87000
PN-V-87001

Read from the PCA scope documents we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

15 lines
PCA

ISO/IEC 17025

Active

AB 154

The scope document we hold says it is valid until 2029-07-22.

View on PCA
PCA

ISO/IEC 17025

Active

AB 155

The scope document we hold says it is valid until 2029-07-22.

View on PCA
PCA

ISO/IEC 17025

Active

AB 1573

The scope document we hold says it is valid until 2027-07-26.

View on PCA

Location

ul. M. Skłodowskiej-Curie 3, Łódź, 90-505, PL

51.77282, 19.47849

Open in Maps
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.