Registers refreshed 2026-11-08.See refresh dates
Germany

H. Butting GmbH & Co KG

Gifhorner Straße 59, 29379, Wittingen-Knesebeck, Germany

DAKKS D-PL-11126-01-00DAKKS D-PL-11126-01-01DAKKS D-PL-11126-01-02ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
49
DAKKS certificates
3
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 49 standard numbers and the 41 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO24
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 5579Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
ISO 7438Metallic materials - Bend test
Show all 24
ISO 8492Metallic materials - Tube - Flattening test
ISO 8493Metallic materials - Tube - Drift-expanding test
ISO 8496Metallic materials - Tube - Ring tensile test
ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ISO 9015-2Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
ISO 9017Destructive tests on welds in metallic materials - Fracture test
ISO 16810Non-destructive testing - Ultrasonic testing - General principles
ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
ISO 17636-2Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
ISO 17781Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels
ISO 21920-3Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators
ASTM19
ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A264
ASTM A265
ASTM A577
ASTM A578
ASTM A923Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
Show all 19
ASTM E112Standard Test Methods for Determining Average Grain Size
ASTM E213
ASTM E273
ASTM E562Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E1245
ASTM G28
ASTM G48Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ISO 10893 series6
ISO 10893-6Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ISO 10893-7Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ISO 10893-8Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
ISO 10893-9Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
ISO 10893-10Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
ISO 10893-11Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

12 lines
DAKKS

ISO/IEC 17025

Active

D-PL-11126-01-00

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-11126-01-01

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-11126-01-02

View scope

Location

Gifhorner Straße 59, Wittingen-Knesebeck, 29379, DE

52.67630, 10.69465

Open in Maps
← All accredited testing labs in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.