China

Guangzhou LCS Compliance

Name: Guangzhou LCS Compliance
Address: No 44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China, Guangzhou , People's Republic of China, Guangzhou, CN

No 44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China, Guangzhou , People's Republic of China, Guangzhou, China

A2LA|5099.01ISO/IEC 17025Register refreshed 2026-09-25

Certificates

Scope items

Standards

Locations

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Contact this laboratory

Visit website

gavin.liang@lcs-cert.com

Open A2LA register entry

Work at Guangzhou LCS Compliance?

Claim this profile to keep it accurate.

Register record

A2LARefreshed 2026-09-25: 5099.01Active

Accredited standards

Our reading of the A2LA scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

ISO

ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only

As written on the certificate · Line 1 (A2LA 5099.01)

CISPR 25; EN 55025; EN 13309 (2010); ECE R10-06; GB/T 18655; ISO 13766-1; Q/LQB S-52; Q/JX 08140; BT/SGMWJ 08244.2; ISO11452-4; SAE J1113-4; GB/T 33014.4-2016; ISO 10605; SAE J1113-13; ISO 7637-2; ISO 7637-3; SAE J1113-11; SAE J1113-12; GB/T 21437.2; GB/T 21437.3; BT-SGMWJ 08244.9; EN 50498; BT/SGMWJ 08244.3; BT/SGMWJ 08244.7; Q/JX 08140-2019; BT-SGMWJ 08244.11; BT/SGMWJ 08244.4

ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

As written on the certificate · Line 1 (A2LA 5099.01)

ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge

As written on the certificate · Line 1 (A2LA 5099.01)

ISO 13766-1Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions

As written on the certificate · Line 1 (A2LA 5099.01)

As written on the certificate · Line 2 (A2LA 5099.01)

ISO 11452-2; GB/T 33014.2; ISO 13766-1; Q/LQB S-52; Q/JX 08140; BT/SGMWJ 08244.6; ISO 11452-8; Q/LQB S-52; Q/JX 08140; BT/SGMWJ 08244.8; ISO 11452-9; Q/LQB S-52; Q/JX 08140; BT/SGMWJ 08244.8; Q/LQB S-52; ISO 16750-2; GB/T 28046.2; IEEE/ANSI C95.1; IEEE/ANSI C95.3; RSS-102 (Issue 5); CFR 47, FCC Part 15B (using ANSI C63.4-2014); CFR 47, FCC Part 18 (using FCC MP-5 (1986); ICES-001; ICES-003; RSS-GEN; RSS-210; RSS-247; RSS-248; RSS-310

ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads

As written on the certificate · Line 2 (A2LA 5099.01)

ISO 11452 series

ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure

As written on the certificate · Line 2 (A2LA 5099.01)

ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods

As written on the certificate · Line 1 (A2LA 5099.01)

ISO 11452-8Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields

As written on the certificate · Line 2 (A2LA 5099.01)

ISO 11452-9Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters

As written on the certificate · Line 2 (A2LA 5099.01)

Other standards

ANSI C63.4American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz

As written on the certificate · Line 3 (A2LA 5099.01)

CFR 47, FCC Part 15C (using ANSI C63.10:2020); CFR 47, FCC Part 15E (using ANSI C63.10:2020); ANSI C63.4:2014; FCC MP-5:1986; ANSI C63.10:2013; ANSI C63.10:2020

CISPR 25Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receiversCertificate says EN 55025. Probably the same standard; not checked against the EN document.

As written on the certificate · Line 1 (A2LA 5099.01)

EN 13309Name not checked yet

As written on the certificate · Line 1 (A2LA 5099.01)

EN 50498Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles

As written on the certificate · Line 1 (A2LA 5099.01)

FCC PART 15Radio Frequency Devices

As written on the certificate · Line 2 (A2LA 5099.01)

As written on the certificate · Line 3 (A2LA 5099.01)

CFR 47, FCC Part 15C (using ANSI C63.10:2020); CFR 47, FCC Part 15E (using ANSI C63.10:2020); ANSI C63.4:2014; FCC MP-5:1986; ANSI C63.10:2013; ANSI C63.10:2020

Scope as published by A2LA

4 lines

A2LA

ISO/IEC 17025

Active

5099.01

The scope document we hold says it is valid until 2026-10-31.

View scope

Accredited scope, certificate 5099.01

Line	Discipline	Method	Matrix	Range
1	electrical	CISPR 25; EN 55025; EN 13309 (2010); ECE R10-06; GB/T 18655; ISO 13766-1; Q/LQB S-52; Q/JX 08140; BT/SGMWJ 08244.2; ISO11452-4; SAE J1113-4; GB/T 33014.4-2016; ISO 10605; SAE J1113-13; ISO 7637-2; ISO 7637-3; SAE J1113-11; SAE J1113-12; GB/T 21437.2; GB/T 21437.3; BT-SGMWJ 08244.9; EN 50498; BT/SGMWJ 08244.3; BT/SGMWJ 08244.7; Q/JX 08140-2019; BT-SGMWJ 08244.11; BT/SGMWJ 08244.4	-	-
2	electrical	ISO 11452-2; GB/T 33014.2; ISO 13766-1; Q/LQB S-52; Q/JX 08140; BT/SGMWJ 08244.6; ISO 11452-8; Q/LQB S-52; Q/JX 08140; BT/SGMWJ 08244.8; ISO 11452-9; Q/LQB S-52; Q/JX 08140; BT/SGMWJ 08244.8; Q/LQB S-52; ISO 16750-2; GB/T 28046.2; IEEE/ANSI C95.1; IEEE/ANSI C95.3; RSS-102 (Issue 5); CFR 47, FCC Part 15B (using ANSI C63.4-2014); CFR 47, FCC Part 18 (using FCC MP-5 (1986); ICES-001; ICES-003; RSS-GEN; RSS-210; RSS-247; RSS-248; RSS-310	-	80 to 6000 MHz; GHz; V/m
3	electrical	CFR 47, FCC Part 15C (using ANSI C63.10:2020); CFR 47, FCC Part 15E (using ANSI C63.10:2020); ANSI C63.4:2014; FCC MP-5:1986; ANSI C63.10:2013; ANSI C63.10:2020	-	to 40000 MHz
4	electrical	For the tests to which this accreditation applies, please refer to the laboratory’s Electrical Scope of Accreditation. Accredited Laboratory A2LA has accredited GUANGZHOU LCS COMPLIANCE TESTING LABORATORY LTD Guangzhou, People’s Republic of China for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 17th day of December 2024. __ _____________________ Mr. Trace McInturff Vice President, Accreditation Services For the Accreditation Council Certificate Number 5099.01 Valid to October 31, 2026

Ranges are reproduced from the accredited scope document as published. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

No 44-1, Qianfeng North Road, Shiqi, Panyu District, Guangzhou, Guangdong, China, Guangzhou , People's Republic of China, Guangzhou, CN

23.11981, 113.31478

Open in Maps

Labs with overlapping accredited scope in China

Accreditation data refreshed from the A2LA register on 2026-09-25.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.