Würth Industrie Service GmbH & Co. KG
Industriepark Würth, 97980, Bad Mergentheim, Germany
- Accredited standards
- 25
- DAKKS certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 25 standard numbers and the 19 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO15
ISO 48-2Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
ISO 48-4Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 2639Steels - Determination and verification of the depth of carburized and hardened cases
ISO 2702Fasteners - Heat treated tapping screws - Mechanical and physical properties
ISO 3506-1Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes
ISO 3506-2Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 16047Fasteners - Torque/clamp force testing
ISO 18203Steel - Determination of the thickness of surface-hardened layers
ISO 898 series4
ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 898-2Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes
ISO 898-3Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes
ISO 898-5Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread
DIN3
DIN 7500-1
DIN 7513
DIN 7516
Other standards3
EN 14399-2
EN 15048-2
VDA 235
DIN EN ISO 898-1; DIN EN ISO 898-2; DIN EN ISO 898-3; DIN EN ISO 898-5; DIN EN ISO 3506-1; DIN EN ISO 3506-2; DIN EN ISO 18203; DIN EN ISO 868; DIN ISO 48; DIN ISO 48-2
DIN ISO 48-4; WISTQL -13 -450; DIN 580; DIN 582; DIN EN 15048-2; DIN EN ISO 6892-1; DIN EN ISO 898-1; DIN EN ISO 898-2; DIN EN ISO 3506-1; DIN EN ISO 3506-2
DIN EN ISO 148 -1; DIN EN ISO 898 -1; WISTQL -13 -449; WISTQL -13 -756; WISTQL -13 -1754; DIN EN ISO 9227
DIN 7500 -1; DIN 7513; DIN 7516; DIN EN ISO 2639; DIN EN ISO 2702; DIN EN ISO 6506 -1; DIN EN ISO 6507 -1; DIN EN ISO 6508 -1
DIN 7500 -1; DIN 267 -27; DIN 267 -28; DIN 7513; DIN 7516; DIN EN ISO 16047; DIN EN 14399 -2; VDA 235 -101; VDA 235 -203; WISTQL -13 -1226
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
7 lines
ISO/IEC 17025
ActiveD-PL-20518-01-01
Accredited scope, certificate D-PL-20518-01-01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | DIN 7500 -1; DIN 7513; DIN 7516; DIN EN ISO 2639; DIN EN ISO 2702; DIN EN ISO 6506 -1; DIN EN ISO 6507 -1; DIN EN ISO 6508 -1 | steel; iron materials; metals; fasteners | - |
| 3 | DIN EN ISO 898-1; DIN EN ISO 898-2; DIN EN ISO 898-3; DIN EN ISO 898-5; DIN EN ISO 3506-1; DIN EN ISO 3506-2; DIN EN ISO 18203; DIN EN ISO 868; DIN ISO 48; DIN ISO 48-2 | fasteners made of carbon steel and alloy steel; fasteners made of corrosion-resistant stainless steel; plastics; ebonite; rubber, vulcanized or thermoplastic | 10 to 100 IRHD |
| 4 | DIN ISO 48-4; WISTQL -13 -450; DIN 580; DIN 582; DIN EN 15048-2; DIN EN ISO 6892-1; DIN EN ISO 898-1; DIN EN ISO 898-2; DIN EN ISO 3506-1; DIN EN ISO 3506-2 | Rubber, vulcanized or thermoplastic; Metallic materials; Fasteners made of carbon steel and alloy steel; Fasteners made of corrosion-resistant stainless steel | - |
| 5 | DIN 7500 -1; DIN 267 -27; DIN 267 -28; DIN 7513; DIN 7516; DIN EN ISO 16047; DIN EN 14399 -2; VDA 235 -101; VDA 235 -203; WISTQL -13 -1226 | screws; bolts; studs | - |
| 6 | DIN EN ISO 148 -1; DIN EN ISO 898 -1; WISTQL -13 -449; WISTQL -13 -756; WISTQL -13 -1754; DIN EN ISO 9227 | Metallic materials; fasteners made of carbon steel and alloy steel; low-alloy steels; steel and ferrous materials | - |
| 7 | DIN; EN; IEC; ISO; VDA; WISTQL | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.