Registers refreshed 2026-11-08.See refresh dates
Sweden

Svevia

Grävarvägen 3, 834 98, Brunflo, Sweden

Visit website
SWEDAC a004078-006SWEDAC A004078-006ISO/IEC 17025Register refreshed 2026-11-08
One of 8 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
20
SWEDAC certificates
2
Sites in our directory
8
SWEDAC accredited scope

What this lab is accredited for

Our reading of the SWEDAC scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 20 standard numbers and the 15 official names we hold. When no standard matches, it searches the method text of every scope line.

EN 12697 series9
EN 12697-1Bituminous mixtures - Test methods - Part 1: Soluble binder content
EN 12697-2Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
EN 12697-5Bituminous mixtures - Test methods - Part 5: Determination of the maximum density
EN 12697-6Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
EN 12697-8Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens
EN 12697-28
EN 12697-29
EN 12697-30
EN 12697-36Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
EN 1097 series5
EN 1097-1Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
EN 1097-2Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 1097-5Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
EN 1097-6Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-9
EN 933 series5
EN 933-1Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 933-3Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
EN 933-4Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
EN 933-5
EN 933-8Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
Other standards1
EN 1744-1Tests for chemical properties of aggregates - Part 1: Chemical analysis

Read from the scope as published by SWEDAC. Register refreshed 2026-11-08.

Scope as published by SWEDAC

4 lines
SWEDAC

ISO/IEC 17025

Active

a004078-006

View on SWEDAC

Accredited scope, certificate a004078-006

LineMethodMatrixRange
1SS-EN ISO/IEC 17025:2018 Svevia AB Brunflo Ackrediteringsnummer 1999 Division Bel; SS-EN 1097-1 N; SS-EN 1097-2 Los Angelestal Ballast Ja 2 Nej SS-EN 1097-5 Vattenkvot Ballast Ja 2 Nej SS-EN 1097-6 Korndensitet och vattenabsorption Ballast Ja 2 Nej SS-EN 1097-9 Kulkvarnsv; SS-EN 12697-1 Bindemedelshalt Asfalt Ja 2 Nej SS-EN 12697-2 Kornstorleksf; SS-EN 12697-28 Provberedning Asfalt Ja 2 Nej SS-EN 12697-29 Asfaltprovkroppars mBallast-
2TDOK 2014:0145Ballast-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

SWEDAC

ISO/IEC 17025

Active

A004078-006

View on SWEDAC

Accredited scope, certificate A004078-006

LineMethodMatrixRange
1SS-EN 1097-1; SS-EN 1097-2; SS-EN 1097-5; SS-EN 1097-6; SS-EN 1097-9; SS-EN 12697-1; SS-EN 12697-2; SS-EN 12697-28; SS-EN 12697-29; SS-EN 12697-30; SS-EN 12697-36; SS-EN 12697-5; SS-EN 12697-6; SS-EN 12697-8; SS-EN 1744-1; SS-EN 933-1; SS-EN 933-3; SS-EN 933-4; SS-EN 933-5; SS-EN 933-8; SS-EN ISO/IEC 17025:2018Ballast-
2TDOK 2014:0145Ballast-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Grävarvägen 3, Brunflo, 834 98, SE

63.08131, 14.82659

Open in Maps

Other Locations

7 other sites in this organization

Jönköping, SE
View
Kungälv, SE
View
Laggatorp, SE
View
Örebro, SE
View
Oxie, SE
View
← All accredited testing labs in Sweden

Accreditation data refreshed from the SWEDAC register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the SWEDAC entry linked above.