Registers refreshed 2026-11-08.See refresh dates
Poland

Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny

ul. Ewarysta Estkowskiego 6, 61-755, Poznań, Poland

PCA AB 053ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
311
PCA certificate
1
Site in our directory
1
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 311 standard numbers and the 128 official names we hold. When no standard matches, it searches the method text of every scope line.

EN156
EN 84
EN 113-1
EN 205
EN 280-1
EN 283
EN 302-1
EN 310
EN 311
EN 314-1
EN 317
EN 319
EN 320
Show all 156
EN 321
EN 322
EN 323
EN 324-1
EN 324-2
EN 408
EN 409
EN 438-2
EN 527-1
EN 527-2
EN 547-2
EN 547-3
EN 597-1
EN 597-2
EN 617
EN 618
EN 620
EN 690
EN 703
EN 707
EN 716-1
EN 716-2
EN 717-1
EN 747-1
EN 747-2
EN 789
EN 809
EN 908
EN 1005-2
EN 1005-3
EN 1021-1
EN 1021-2
EN 1022
EN 1087-1
EN 1116
EN 1130
EN 1243
EN 1309-1
EN 1309-3
EN 1334
EN 1335-1
EN 1335-2
EN 1374
EN 1382
EN 1383
EN 1516
EN 1517
EN 1533
EN 1534
EN 1569
EN 1672-1
EN 1678
EN 1725
EN 1728
EN 1729-1
EN 1729-2
EN 1730
EN 1957
EN 1974
EN 12041
EN 12221-1
EN 12221-2
EN 12235
EN 12299
EN 12490
EN 12520
EN 12521
EN 12525
EN 12663-1
EN 12663-2
EN 12664
EN 12667
EN 12720
EN 12721
EN 12722
EN 12727
EN 12733
EN 13036-4
EN 13103-1
EN 13104
EN 13150
EN 13183-1
EN 13183-2
EN 13208
EN 13262
EN 13272-1
EN 13272-2
EN 13329
EN 13354
EN 13389
EN 13446
EN 13448
EN 13570
EN 13647
EN 13683
EN 13696
EN 13698-1
EN 13698-2
EN 13749
EN 13823
EN 13893
EN 13979-1
EN 13986
EN 14041
EN 14072
EN 14073-3
EN 14074
EN 14080
EN 14253Mechanical vibration - Measurement and evaluation of occupational exposure to whole-body vibration with reference to health - Practical guidance

Certificate says EN 14253+A1:2011. Probably the same standard; not checked against the EN document.

EN 14323
EN 14342
EN 14354
EN 14592
EN 14749
EN 14808
EN 14904
EN 14930
EN 14988
EN 15153-1
EN 15153-2
EN 15165
EN 15180
EN 15185
EN 15186
EN 15187
EN 15227
EN 15372
EN 15534-1
EN 15570
EN 15737
EN 15892
EN 16121
EN 16122
EN 16139
EN 16516
EN 16611
EN 16834
EN 17285
EN 17539
EN 50500
EN 50592
EN 50617-1
EN 50636-2-91
EN 50728
ISO74
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 730Agricultural wheeled tractors - Rear-mounted three-point linkage - Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
ISO 845Cellular plastics and rubbers - Determination of apparent density
ISO 945-1Microstructure of cast irons - Part 1: Graphite classification by visual analysis
ISO 1171Coal and coke - Determination of ash
ISO 1172Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods
ISO 1463Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
ISO 1798Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
ISO 1856Flexible cellular polymeric materials - Determination of compression set
ISO 1923Cellular plastics and rubbers - Determination of linear dimensions
ISO 2332Agricultural tractors and machinery - Connection of implements via three-point linkage - Clearance zone around implement
Show all 74
ISO 2439Flexible cellular polymeric materials - Determination of hardness (indentation technique)
ISO 3095Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles
ISO 3340Fibre building boards - Determination of sand content
ISO 3381Railway applications - Acoustics - Noise measurement inside railbound vehicles
ISO 3385Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
ISO 3386-1Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials
ISO 3744Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
ISO 3887Steels - Determination of the depth of decarburization
ISO 4211-4Furniture - Tests for surfaces - Part 4: Assessment of resistance to impact
ISO 4545-1Metallic materials - Knoop hardness test - Part 1: Test method
ISO 5353Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point
ISO 5370Solid biofuels - Determination of fines content in pellets
ISO 5470-1Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
ISO 5692-1Agricultural vehicles - Mechanical connections on towed vehicles - Part 1: Dimensions for hitch rings of 50/30 mm cross section
ISO 5692-2Agricultural vehicles - Mechanical connections on towed vehicles - Part 2: Coupling ring 40 with socket
ISO 6395Earth-moving machinery - Determination of sound power level - Dynamic test conditions
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7170Furniture - Storage units - Test methods for the determination of strength, durability and stability
ISO 7438Metallic materials - Bend test
ISO 8307Flexible cellular polymeric materials - Determination of resilience by ball rebound
ISO 8491Metallic materials - Tube (in full section) - Bend test
ISO 8611-1Pallets for materials handling - Flat pallets - Part 1: Test methods
ISO 9239-1Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source
ISO 9612Acoustics - Determination of occupational noise exposure - MethodologyExclusion

Limits written next to it

EN ISO 9612:2011 excluding the

Exclusion. Written next to it on line 53 of PCA certificate AB 053.

PN-EN ISO 9612:2011 z wyłączeniem metody obejmującej strategię 2 i 3 – punkt 10 i 11 / PN-EN ISO 9612:2011 excluding the method that includes the strategy 2 and 3 – point 10 and 11

Exclusion. Written next to it on line 53 of PCA certificate AB 053.

ISO 11201Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11684Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety labels - General principles
ISO 11925-2Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test
ISO 12460-3Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
ISO 12460-5Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method)
ISO 12777-1Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
ISO 13732-1Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces
ISO 13732-3Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces
ISO 13851Safety of machinery - Two-hand control devices - Principles for design and selection
ISO 13854Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
ISO 13857Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 14780Solid biofuels - Sample preparation
ISO 16948Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen
ISO 16968Solid biofuels - Determination of minor elements
ISO 16994Solid biofuels and pyrogenic biocarbon - Determination of sulfur and chlorine content
ISO 17101-1Agricultural machinery - Thrown-object test and acceptance criteria - Part 1: Rotary mowers
ISO 17101-2Agricultural machinery - Thrown-object test and acceptance criteria - Part 2: Flail mowers
ISO 17178Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements
ISO 17827-1Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above
ISO 17827-2Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with apertures of 3,15 mm and below
ISO 17828Solid biofuels - Determination of bulk density
ISO 17829Solid biofuels - Determination of length and diameter of pellets
ISO 17831-1Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
ISO 18122Solid biofuels - Determination of ash content
ISO 18123Solid biofuels - Determination of volatile matter
ISO 18125Solid biofuels - Determination of calorific value
ISO 18135Solid Biofuels - Sampling
ISO 18846Solid biofuels - Determination of fines content in quantities of pellets
ISO 18847Solid biofuels - Determination of particle density of pellets and briquettes
ISO 20019Agricultural vehicles - Mechanical connections on towed vehicles - Dimensions for hitch rings
ISO 21404Solid biofuels - Determination of ash melting behaviour
ISO 22868Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy)
ISO 24334Laminate floor coverings - Determination of locking strength for mechanically assembled panels
ISO 24336Laminate floor coverings - Determination of thickness swelling after partial immersion in water
ISO 24338Laminate floor coverings - Determination of abrasion resistance
IEC 61000 series12
IEC 61000-3-2Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-3-3Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 61000-4-2Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

Certificate says EN 61000-4-3. Probably the same standard; not checked against the EN document.

IEC 61000-4-4Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 61000-4-5Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
IEC 61000-4-6Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-8Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-9Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test
IEC 61000-4-11Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
IEC 61000-4-29Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 61000-4-39Electromagnetic compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test
ISO 4254 series11
ISO 4254-1Agricultural machinery - Safety - Part 1: General requirements
ISO 4254-5Agricultural machinery - Safety - Part 5: Power-driven soil-working machines
ISO 4254-6Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors
ISO 4254-7Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters
ISO 4254-8Agricultural machinery - Safety - Part 8: Solid fertilizer distributors
ISO 4254-9Agricultural machinery - Safety - Part 9: Seed drills
ISO 4254-10Agricultural machinery - Safety - Part 10: Rotary tedders and rakes
ISO 4254-11Agricultural machinery - Safety - Part 11: Pick-up balers
ISO 4254-12Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers
ISO 4254-14Agricultural machinery - Safety - Part 14: Bale wrappers
ISO 4254-17Agricultural machinery - Safety - Part 17: Root crop harvesters
CISPR7
CISPR 11Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

Certificate says EN 55011. Probably the same standard; not checked against the EN document.

CISPR 14-1Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

Certificate says EN 55014-1. Probably the same standard; not checked against the EN document.

CISPR 15Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

Certificate says IEC 55015. Probably the same standard; not checked against the EN document.

CISPR 16-2-1Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

Certificate says EN 55016-2-1. Probably the same standard; not checked against the EN document.

CISPR 16-2-3Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

Certificate says EN 55016-2-3. Probably the same standard; not checked against the EN document.

CISPR 22Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

Certificate says EN 55022. Probably the same standard; not checked against the EN document.

CISPR 32Electromagnetic compatibility of multimedia equipment - Emission requirements

Certificate says EN 55032. Probably the same standard; not checked against the EN document.

IEC5
IEC 60204-1Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60335-1Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60335-2-71
IEC 62841-1
IEC 62841-4-3
EN 50121 series4
EN 50121-2
EN 50121-3-1
EN 50121-3-2Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
EN 50121-4Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus
ASTM3
ASTM D6007
ASTM E112Standard Test Methods for Determining Average Grain Size
ASTM E1333
BS3
BS 5852-1
BS 5852-2
BS 8509
EN 581 series3
EN 581-1
EN 581-2
EN 581-3
ETSI3
ETSI EN 300 220-2
ETSI EN 300 328Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum
ETSI EN 301 893
ISO 13061 series3
ISO 13061-2Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 2: Determination of density for physical and mechanical tests
ISO 13061-3Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 3: Determination of ultimate strength in static bending
ISO 13061-17Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 17: Determination of ultimate stress in compression parallel to grain
ISO 14122 series3
ISO 14122-2Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways
ISO 14122-3Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails
ISO 14122-4Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
ISO 16000 series3
ISO 16000-3Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method
ISO 16000-6Indoor air - Part 6: Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air by active sampling on sorbent tubes, thermal desorption and gas chromatography using MS or MS FID
ISO 16000-9Indoor air - Part 9: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Emission test chamber method
ISO 18134 series3
ISO 18134-1Solid biofuels - Determination of moisture content - Part 1: Reference method
ISO 18134-2Solid biofuels - Determination of moisture content - Part 2: Simplified method
ISO 18134-3Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample
ISO 5395 series3
ISO 5395-1Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests
ISO 5395-2Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers
ISO 5395-3Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator
Other standards15
ANSI C63.4American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
EPA 7196
PN-83/E-04040.03
PN-C-04906
PN-H-04045
PN-H-04504
PN-H-04505
PN-H-04517
PN-H-04661
PN-K-88177
PN-N-01307:1994Hałas - Dopuszczalne wartości hałasu w środowisku pracy - Wymagania dotyczące wykonywania pomiarów
PN-R-36153
PN-R-41003
PN-Z-01338
PN-Z-01339

Read from the PCA scope document we downloaded on 2026-02-11. Register refreshed 2026-11-06.

Scope as published by PCA

59 lines
PCA

ISO/IEC 17025

Active

AB 053

The scope document we hold says it was valid until 2026-07-08. That date has passed, so our copy may be out of date. We downloaded it from the PCA register on 2026-02-11. Check the PCA register for the current scope.

View on PCA

Location

ul. Ewarysta Estkowskiego 6, Poznań, 61-755, PL

52.40066, 16.91973

Open in Maps
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.