Universität Stuttgart
Keplerstraße 7, 70174, Stuttgart, Germany
- Accredited standards
- 22
- DAKKS certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 22 standard numbers and the 22 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO10
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1407Rubber - Determination of solvent extract
ISO 2039-1Plastics - Determination of hardness - Part 1: Ball indentation method
ISO 6427Plastics - Determination of matter extractable by organic solvents (conventional methods)
ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
ISO 11359-1Plastics - Thermomechanical analysis (TMA) - Part 1: General principles
ISO 11359-2Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 527 series5
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-5Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
ISO 11357 series4
ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-4Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 9924 series3
ISO 9924-1Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 9924-2Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers
ISO 9924-3Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers
DIN EN ISO 6427; ISO 1407; DIN EN ISO 178; DIN EN ISO 527 -1; DIN EN ISO 527 -2; DIN EN ISO 527 -3; DIN EN ISO 527 -4; DIN EN ISO 527 -5; DIN EN ISO 179 -1
DIN EN ISO 868; DIN EN ISO 2039 -1; Liebherr -Norm
DIN EN ISO 11358 -1; ISO 9924 -1; ISO 9924 -2; ISO 9924 -3; ISO 11359 -1; ISO 11359 -2; DIN EN ISO 1183 -1
DIN EN ISO 11357 -1; DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 11357 -4
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
5 lines
ISO/IEC 17025
ActiveD-PL-11027-02-00
Accredited scope, certificate D-PL-11027-02-00
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | DIN EN ISO 11357 -1; DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 11357 -4 | polymere Werkstoffe (Thermoplaste, Duromere, Elastomere), Verbundwerkstoffen, Rohstoffen, Halbzeugen und Bauteilen | - |
| 3 | DIN EN ISO 11358 -1; ISO 9924 -1; ISO 9924 -2; ISO 9924 -3; ISO 11359 -1; ISO 11359 -2; DIN EN ISO 1183 -1 | Plastics | - |
| 4 | DIN EN ISO 6427; ISO 1407; DIN EN ISO 178; DIN EN ISO 527 -1; DIN EN ISO 527 -2; DIN EN ISO 527 -3; DIN EN ISO 527 -4; DIN EN ISO 527 -5; DIN EN ISO 179 -1 | Plastics | - |
| 5 | DIN EN ISO 868; DIN EN ISO 2039 -1; Liebherr -Norm | Kunststoffe und Hartgummi; Seilrollen aus Guss -Polyamid PA 6G; Seilrollen aus Guss -Polyamid PA | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in Germany
- SKZ - TestingWürzburg · ~128 kmDAKKSShares 3 accredited methods and materialsISO 178ISO 868Plastics
- NonaChemLadenburg · ~88 kmDAKKSShares 2 accredited methods and materialsISO 868Plastics
- GP KunststofflaborHettstadt · ~123 kmDAKKSShares 2 accredited methods and materialsISO 178Plastics
- Polytest IngenieureFürth · ~151 kmDAKKSShares 2 accredited methods and materialsISO 178Plastics
- Ostthüringische Materialprüfgesellschaft für Textil und Kunststoffe mbH Rudolstadt (OMPG)Rudolstadt · ~263 kmDAKKSShares 2 accredited methods and materialsISO 178Plastics
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.