Registers refreshed 2026-11-08.See refresh dates
Italy

ABB S.p.A.

Via Pescaria 6, 24123, Bergamo, Italy

Visit website
ACCREDIA 00062ISO/IEC 17025Register refreshed 2026-11-06
One of 2 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
15
ACCREDIA certificate
1
Sites in our directory
2
ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 15 standard numbers and the 2 official names we hold. When no standard matches, it searches the method text of every scope line.

IEC4
IEC 60068-2-1Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-52Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 60092-504
IEC 60112
IEC 60947 series4
IEC 60947-1
IEC 60947-2
IEC 60947-3
IEC 60947-4-1
IEC 62271 series4
IEC 62271-1
IEC 62271-102
IEC 62271-103
IEC 62271-200
IEC 61439 series3
IEC 61439-1
IEC 61439-2
IEC 61439-3

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

7 lines
ACCREDIA

ISO/IEC 17025

Active

00062

View scope

Accredited scope, certificate 00062

LineMethodMatrixRange
1

Extracted from the scope document; tables may not line up. View scope for the original.

ABB S.p.A. Via Pescaria 6 24123 Bergamo BG Allegato al certificato di accreditamento n. 00062 rev. 5 del 20/11/2025 UNI CEI EN ISO/IEC 17025:2018 Revisione: 51 Sede A Data: 20/11/2025 pag. 1 di 7 ELENCO Prove Accreditate - Con Campo Fisso in Categoria: 0 Apparecchiatura a bassa tensione: Interruttori automatici/Low-voltage switchgear and controlgear: Circuit-breakers Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I Annex A - Coordinamento tra un interruttore e un altro dispositivo di protezione contro il cortocircuito associato allo stesso circuito/Co-ordination between a circuit-breaker and another short-circuit protective device associated in the same circuit, Annex C - Sequenza di test di cortocircuito dei singoli poli/Individual pole short-circuit test sequence, Annex H - Sequenza di test per interruttori per IT/Test sequence for circuit-breakers for IT systems, Par 8.3.3 - Sequenza di prova I: caratteristiche generali relative alle prestazioni/Test sequence I: general performance characteristics, Par 8.3.4 - Sequenza di prova II: Potere di interruzione nominale di servizio in cortocircuito/Test sequence II: Rated service short-circuit breaking capacity, Par 8.3.5 - Sequenza di prova III: Potere di interruzione nominale massimo in cortocircuito/Test sequence III: Rated ultimate short-circuit breaking capacity, Par 8.3.6 - Sequenza di prova IV: Corrente di tenuta nominale di breve durata/Test sequence IV: Rated short-time withstand current, Par 8.3.7 - Sequenza di prova V: Prestazioni di interruttori integralmente fusi/Test sequence V: Performance of integrally fused circuit-breakers, Par 8.3.8 - Sequenza di prova VI: sequenza di prova combinata/Test sequence VI: combined test sequence - solo/only Annex A: Co-ordination between a circuit-breaker and another short-circuit protective device associated in the same circuit; Annex C: Individual pole short-circuit test sequence; Annex H: Test sequence for circuit-breakers for IT systems; 8.3.6.3–8.3.8.3: Short-time withstand current test; 8.3.3.5: Overload performance; 8.3.4.2 – 8.3.8.4: Service short-circuit breaking capacity; 8.3.6.5: Short-circuit breaking capacity test at maximum short time withstand current; 8.3.5.3: Ultimate short-circuit breaking capacity; 8.3.7.2 –8.3.7.6–8.3.7.7: Integrally fused circuit-breakers (short-circuit tests) (AC: ≤120kAx1s, ≤200kA 500V, ≤150kA 1kV, ≤85kA 1,5kV; DC ≤100kAx1s, ≤120kA 2kV) Annex A - Coordinamento tra un interruttore e un altro dispositivo di protezione contro il cortocircuito associato allo stesso circuito/Co-ordination between a circuit-breaker and another short-circuit protective device associated in the same circuit, Annex C - Sequenza di test di cortocircuito dei singoli poli/Individual pole short-circuit test sequence, Annex H - Sequenza di test per interruttori per IT/Test sequence for circuit-breakers for IT systems, Par 9.3.4 - Sequenza di prova I: caratteristiche generali relative alle prestazioni/Test sequence I: general performance characteristics, Par 9.3.5 - Sequenza di prova II: Potere di interruzione nominale di servizio in cortocircuito/Test sequence II: Rated service short-circuit breaking capacity, Par 9.3.6 - Sequenza di prova III: Potere di interruzione nominale massimo in cortocircuito/Test sequence III: Rated ultimate short-circuit breaking capacity, Par 9.3.7 - Sequenza di prova IV: Corrente di tenuta nominale di breve durata/Test sequence IV: Rated short-time withstand current, Par 9.3.8 - Sequenza di prova V: Prestazioni di interruttori integralmente fusi/Test sequence V: Performance of integrally fused circuit-breakers, Par 9.3.9 - Sequenza di prova VI: sequenza di prova combinata/Test sequence VI: combined test sequence - solo/only Annex A: Co-ordination between a circuit-breaker and another short-circuit protective device associated in the same circuit; Annex C: Individual pole short-circuit test sequence; Annex H: Test sequence for circuit-breakers for IT systems; 9.3.7.3–9.3.9.3: Short-time withstand current test; 9.3.4.5: Overload performance; 9.3.5.2 – 9.3.9.4: Service short-circuit breaking capacity; 9.3.7.5: Short-circuit breaking capacity test at maximum short time withstand current; 9.3.6.3-9.3.11.3: Ultimate short-circuit breaking capacity; 9.3.8.2 –9.3.8.6–9.3.8.7: Integrally fused circuit-breakers (short-circuit tests) (AC: ≤120kAx1s, ≤200kA 500V, ≤150kA 1kV, ≤85kA 1,5kV; DC ≤100kAx1s, ≤120kA 3kV) Annex F - Prove aggiuntive per interruttori con protezione elettronica di massima corrente/Additional tests for circuit-breakers with electronic over-current protection, Annex P - Interruttori a corrente continua per l’uso nelle applicazioni fotovoltaiche (PV)/DC circuit-breakers for use in photovoltaic (PV) applications, Par 9.5 - Prove speciali – Caldo umido, nebbia salina, vibrazioni e urti/Special tests – Damp heat, salt mist, vibration and shock - solo/only Annex F F.7 Dry heat test; Annex F F.8 Damp heat test; Annex F F.9 Temperature variation cycles at a specified rate of change; Annex P P.8.3.10: Thermal cycling (F.7: +25°C÷55°C; F.8: +25°C÷+55 °C, 90%÷98% UR; F.9-P.8.3.10: -40°C÷85°C;) IEC 60947-2:2016/AMD1:2019/COR1:201 9 _ IEC 60947-2:2024 _ IEC 60947-2:2024 _
2UNI CEI EN ISO/IEC 17025:2018; IEC 60947-2:2016/AMD1:2019/COR1:2019; IEC 60947-2:2024-5 to 5000 W
3UNI CEI EN ISO/IEC 17025:2018; IEC 62271-103:2021/COR1:2025; IEC 62271-200:2021/AMD1:2024; IEC 62271-1:2017/Amd1:2021; IEC 62271-102:2018/AMD1:2022; IEC 60947-4-1:2018-See scope document
4UNI CEI EN ISO/IEC 17025:2018; IEC 60947-3:2020/COR1:2021/AMD1:2025; IEC 60947-3:2020/COR1:2021; IEC 60947-1:2020/COR1:2022/COR2:2024Apparecchiature a bassa tensione/Low-voltage switchgear and controlgearto 85 °C
5UNI CEI EN ISO/IEC 17025:2018; IEC 60947-1:2020/COR1:2022/COR2:2024; IEC 61439-3:2024solid insulating materials; conductors; Apparecchiature assiemate di protezione e di manovra per bassa tensione (quadri BT): Quadri di distribuzione destinati ad essere utilizzati da persone comuni (DBO)/Low-voltage switchgear and controlgear assemblies: Distribution boards intended to be operated by ordinary persons (DBO); Apparecchiature assiemate di protezione e di manovra per bassa tensione (quadri BT): Quadri di potenza/Low-voltage switchgear and controlgear assemblies: Power switchgear and controlgear assemblies0.05 to 150 mm
6IEC 61439-2:2020; IEC 61439-1:2020/COR1:2021/COR2:2023; IEC 60068-2-52:2017Apparecchiature assiemate di protezione e di manovra per bassa tensione (quadri BT)/Low-voltage switchgear and controlgear assemblies; Apparecchiature elettriche ed elettroniche e materiali metallici/Electric and electronic equipment and metal materials; Apparecchiature elettriche ed elettroniche/Electric and electronic equipment0.05 to 150 mm
7IEC 60068-2-1:2025; IEC 60092-504:2016; IEC 60112:2020; IEC 60112:2025Apparecchiature elettriche, elettroniche e meccaniche, componenti e materiali/Electric, electronic and mechanical equipment, components and materials, Organismi e campioni biologici animali e vegetali/Animal and plant biological organisms and samples-40 to 0 °C

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Via Pescaria 6, Bergamo, 24123, IT

45.71179, 9.67179

Open in Maps

Other Locations

1 other site in this organization

Dalmine, IT
View
← All accredited testing labs in Italy

Accreditation data refreshed from the ACCREDIA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.