Registers refreshed 2026-11-08.See refresh dates
Germany

Currenta GmbH & Co. OHG

Chempark Leverkusen, 51368, Leverkusen, Germany

DAKKS D-PL-14097-01-01DAKKS D-PL-14097-01-02DAKKS D-PL-14097-01-03and 3 moreISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
133
DAKKS certificates
6
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 133 standard numbers and the 86 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO63
ISO 834-1Fire-resistance tests - Elements of building construction - Part 1: General requirements
ISO 834-8Fire-resistance tests - Elements of building construction - Part 8: Specific requirements for non-loadbearing vertical separating elements
ISO 1182Reaction to fire tests for products - Non-combustibility test
ISO 4589-2Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
ISO 5658-2Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building and transport products in vertical configuration
ISO 5659-2Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
ISO 5660-1Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
ISO 5667-6Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams
ISO 5814Water quality - Determination of dissolved oxygen - Electrochemical probe method
ISO 5961Water quality - Determination of cadmium by atomic absorption spectrometry
ISO 6222Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium
ISO 6468Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction
Show all 63
ISO 6878Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method
ISO 7027-1Water quality - Determination of turbidity - Part 1: Quantitative methods
ISO 7887Water quality - Examination and determination of colour
ISO 7899-2Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method
ISO 7980Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method
ISO 9308-1Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora
ISO 9377-2Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography
ISO 9509Water quality - Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms
ISO 9562Water quality - Determination of adsorbable organically bound halogens (AOX)
ISO 9705-1Reaction to fire tests - Room corner test for wall and ceiling lining products - Part 1: Test method for a small room configuration
ISO 9772Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
ISO 9888Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Static test (Zahn-Wellens method)
ISO 10301Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 10304-3Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
ISO 10523Water quality - Determination of pH
ISO 11348-1Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria
ISO 11348-2Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria
ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
ISO 11369Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
ISO 11732Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection
ISO 11885Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 11905-1Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate
ISO 11925-2Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test
ISO 12952-1Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette
ISO 12952-2Textiles - Assessment of the ignitability of bedding items - Part 2: Ignition source: match-flame equivalent
ISO 13320Particle size analysis - Laser diffraction methods
ISO 13395Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
ISO 13885-1Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent
ISO 14402Water quality - Determination of phenol index by flow analysis (FIA and CFA)
ISO 14403-1Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA)
ISO 14403-2Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA)
ISO 14911Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water
ISO 15088Water quality - Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio)
ISO 15586Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace
ISO 15587-1Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion
ISO 15587-2Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion
ISO 15680Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
ISO 15681-1Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 1: Method by flow injection analysis (FIA)
ISO 15681-2Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA)
ISO 16017-1Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling
ISO 16911-1Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
ISO 17294-2Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
ISO 17852Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
ISO 17943Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
ISO 17993Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
ISO 18412Water quality - Determination of chromium(VI) - Photometric method for weakly contaminated water
ISO 19701Methods for sampling and analysis of fire effluents
ISO 19702Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
ISO 21258Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method
ISO 23913Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection
EN35
EN 872Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
EN 932-1Tests for general properties of aggregates - Part 1: Methods for sampling
EN 1021-1
EN 1021-2
EN 1363-1
EN 1363-2
EN 1364-1
EN 1483Water quality - Determination of mercury - Method using atomic absorption spectrometry
EN 1484Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
EN 1899-1Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815:1989, modified)
EN 1899-2Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples
EN 1911Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method
Show all 35
EN 1948-1Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
EN 2011
EN 2030
EN 12846
EN 12880Characterization of sludges - Determination of dry residue and water content
EN 13284-1Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 13823
EN 13925-1
EN 14385Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
EN 14390
EN 14702-1
EN 14789Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN 14790Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
EN 14791Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
EN 14792Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence
EN 15058Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
EN 15259Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
EN 16989
EN 17084
EN 27888Water quality - Determination of electrical conductivity
EN 45545-2
EN 45545-3
EN 50305
DIN16
DIN 4102
DIN 5510
DIN 6162
DIN 18234
DIN 19698
DIN 19747Investigation of solids - Pre-treatment, preparation and processing of samples for chemical, biological and physical investigations
DIN 38405
DIN 38409
DIN 38412
DIN 38415
DIN 51750
DIN 51855-4
DIN 53019
DIN 54836
DIN 54837
DIN 66084
IEC 60695 series5
IEC 60695-2-11
IEC 60695-2-12
IEC 60695-2-13
IEC 60695-11-10
IEC 60695-11-20
IEC4
IEC 60754-1
IEC 60754-2
IEC 61034-2
IEC 61730-2
IEC 60332 series4
IEC 60332-1-2Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
IEC 60332-1-3
IEC 60332-2-2
IEC 60332-3-21
ISO 11357 series3
ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
Other standards3
ASTM D3675
ASTM E162
NF D60-013

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

62 lines
DAKKS

ISO/IEC 17025

Active

D-PL-14097-01-01

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-14097-01-02

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-14097-01-03

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-14097-01-04

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-14097-01-05

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-14097-01-06

View scope

Location

Chempark Leverkusen, Leverkusen, 51368, DE

51.01455, 6.98404

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.