China

Global-Standard (Shanghai) Testing Technology Co.,Ltd

No.1215,Yuanda Road,Jiading District,Shanghai,China, Shanghai, 201805, People's Republic of China, Shanghai, China

A2LA 5971.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 24
A2LA certificate: 1
Site in our directory: 1

A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 24 standard numbers and the 19 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO11

ISO 1043-1Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics

ISO 1456Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium

ISO 1463Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

ISO 1519Paints and varnishes - Bend test (cylindrical mandrel)

ISO 1856Flexible cellular polymeric materials - Determination of compression set

ISO 2285Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°

ISO 4577Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method

ISO 12219-6Interior air of road vehicles - Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature - Small chamber method

ISO 12219-7Interior air of road vehicles - Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements

ISO 16925Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting

ISO 4628 series7

ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system

ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering

ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting

ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking

ISO 4628-5Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking

ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect

ISO 4628-10Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion

ASTM4

ASTM B456

ASTM B604

ASTM D2803

ASTM D3574Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Polyurethane Foams

Other standards2

VDA 270

VDA 276

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

6 lines

A2LA

ISO/IEC 17025

Active

5971.01

The scope document we hold says it was valid until 2026-08-31. That date has passed, so our copy may be out of date. We downloaded it from the A2LA register on 2026-03-14. Check the A2LA register for the current scope.

View scope

Accredited scope, certificate 5971.01

Line	Method	Matrix	Range
1	SAE J948; ISO 1456; ISO 1463; ISO 1519; MBN 10494-5; MBN 55555-6; ASTM B456; ASTM B604; DBL 7384; MBN 10518	auto parts	-
2	MBN 10494-6(Sec 5.2); ISO 16925; DIN EN ISO 16925; MBN 10494-5(Sec 5.3); ISO 4577; DBL 5307(Sec 6.1); ASTM D3574 (Method D); ISO 1856; DIN ISO 2285; MBN 10518(Sec 5.1); MBN 10526(Sec 6.2~6.3); MBN 55555-6(Sec 5.21, Sec 5.24); MBN 10518(Sec 5.2); MBN 10526(Sec 6.4); MBN 10526(Sec 8); MBN 10526(Sec 9)i; MBN 10526 (Sec 7); MBN 55555-6(Sec 5.5); MBN 55555-6(Sec 5.7); MBN 55555-6(Sec 5.17); MBN 55555-6(Sec 5.11~5.13); MBN 10494-5(Sec 5.8.2); MBN 55555-6(Sec 5.8); MBN 10494-5(Sec 5.12); MBN 10494-5(Sec 5.10)	-	-
3	MBN 10494-5; MBN LV 124-2; MBN 10306; MBN LV 124-2; MBN 10306; MBN 10518; ISO 1043-1; VDA 270; DIN ISO 12219-6; VDA 276; DIN ISO 12219-7; ISO 2813; MBN 10494-4; MBN 10476; MBN 10494-4; MBN 55555-5; MBN 10505; MBN 10506; MBN 10494-4; MBN 10494-6; MBN 10306; MBN LV 124-2; MBN 10306	-	-
4	MBN 10494-6(Sec 5.6); ASTM D2803(Procedure C); MBN 10518(Sec 6.10); MBN 10494-6(Sec 5.3, Sec 5.4, Sec 5.5.1, Sec 5.5.2, Sec 5.11); MBN 10306 (Sec 9.6 ~9.7); MBN LV 124-2 (Sec 14.6~14.7 ); DIN EN ISO 4628-1; ISO 4628-1; DIN EN ISO 4628-10; ISO 4628-10; DIN EN ISO 4628-2; ISO 4628-2; DIN EN ISO 4628-3; ISO 4628-3; DIN EN ISO 4628-4; ISO 4628-4; DIN EN ISO 4628-5; ISO 4628-5; DIN EN ISO 4628-8; ISO 4628-8; MBN LV 124-1 (Sec 6.1~6.22); MBN LV 124-2 (Sec 6.1~6.22); MBN LV 124-2 (Sec 13.1, Sec 13.4, Sec 13.5, Sec 13.6); MBN 10306 (Sec 8.1, Sec 8.4~8.6); MBN LV 124-2 (Sec 14.1~14.5, Sec 14.8~14.9 , Sec 14.12~14.16); MBN 55555-4 (Sec 5.1~5.9); MBN 10306 (Sec 9.1~9.5, Sec 9.8~9.9，Sec 9.12~9.16); MBN 10518(Sec 6.1~6.5, 6.7~6.9); MBN 10494-5(Sec 5.11); MBN 10494-6(Sec 5.10); MBN LV 124-2(Sec 14.18); MBN 10306 Sec 9.18; MBN LV 124-2 (Sec 16.1~16.3); MBN 10306 (Sec 11.1~11.3); MBN LV 124-2(Sec 13.3); MBN 10306(Sec 8.3)	-	-
5	MBN LV 124-2 (Sec 14.10~14.11); MBN 10306(Sec 9.10~9.11); MBN 10306 (Sec 8.7)	-	-
6	Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited GLOBAL-STANDARD (SHANGHAI) TESTING TECHNOLOGY Co.,Ltd Shanghai, China for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 7th day of August 2024. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 5971.01 Valid to August 31, 2026

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Accreditation data refreshed from the A2LA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.