Supply Technologies
Solon, OH, United States
Visit website- Accredited standards
- 25
- A2LA certificate
- 1
- Sites in our directory
- 3
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 25 standard numbers and the 19 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM13
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM B487Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
ASTM B568
ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E112Standard Test Methods for Determining Average Grain Size
ASTM E340Standard Practice for Macroetching Metals and Alloys
ASTM E381
ASTM E384Standard Test Method for Microindentation Hardness of Materials
ASTM E1077
ASTM F606Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F788
ASTM F812
ASTM F837
ISO6
ISO 2320Fasteners - Prevailing torque steel nuts - Functional properties
ISO 2702Fasteners - Heat treated tapping screws - Mechanical and physical properties
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 7085Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
ISO 10666Drilling screws with tapping screw thread - Mechanical and functional properties
ISO 15330Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method
ISO 6157 series3
ISO 6157-1Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements
ISO 6157-2Fasteners - Surface discontinuities - Part 2: Nuts
ISO 6157-3Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements
ISO 898 series3
ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 898-2Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes
ISO 898-5Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread
ISO/IEC 17025:2017; ASTM B487; ASTM B568; ASTM F788; ASTM F812; ASTM F837/F837M; ISO 6157-1; ISO 6157-2; ISO 6157-3; SAE J122; SAE J123; IFI-504; ISO 10666; FIP 1000.7; SAE J78; ASME B18.6.3; SAE J81; SAE J933; SAE J1237; FIP 1000.1; BS EN ISO 7085; ASTM A370; ASTM F606/F606M; SAE J429; SAE J1199; ISO 898-1; ASTM E18; FIP 1000.1 through 1000.7; ISO 15330; SAE J773; ASME B18.13; ASME B18.21.1
ASTM E112; SAE J81, J423, J933, J1237; ISO 7085, 2702, 898-5; ASTM E1077, F2328/F2328M; SAE J121, J419, J1237; ASTM E340; ASTM E381, E407; SAE J78, J81, J429, J1195; ASTM E384; ISO 6507-1; ASME B18.16.M; IFI 100/107, 124/125, 524/525; ISO 15330, 2320; ASME B18.6.3; FIP 1000; ISO 7085; SAE J78, J81, J933, J1237; IFI 100/107; ASME B18.16M; ASME B18.21.1; ASTM F837/F837M; SAE J995; ISO 6157-1, 6157-3; SAE J429, J1199; ISO 898-1
SAE J995; SAE J1199; SAE J429; ISO 898-1; ASME B18.13; ISO 898-2; ISO 2702; ISO 898-5; J429; J1195; ISO 2320
Read from the A2LA scope document we downloaded on 2026-08-05. Register refreshed 2026-11-06.
Scope as published by A2LA
4 lines
ISO/IEC 17025
Active730.01
The scope document we hold says it is valid until 2028-04-30.
Accredited scope, certificate 730.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; ASTM B487; ASTM B568; ASTM F788; ASTM F812; ASTM F837/F837M; ISO 6157-1; ISO 6157-2; ISO 6157-3; SAE J122; SAE J123; IFI-504; ISO 10666; FIP 1000.7; SAE J78; ASME B18.6.3; SAE J81; SAE J933; SAE J1237; FIP 1000.1; BS EN ISO 7085; ASTM A370; ASTM F606/F606M; SAE J429; SAE J1199; ISO 898-1; ASTM E18; FIP 1000.1 through 1000.7; ISO 15330; SAE J773; ASME B18.13; ASME B18.21.1 | fasteners | - |
| 2 | ASTM E112; SAE J81, J423, J933, J1237; ISO 7085, 2702, 898-5; ASTM E1077, F2328/F2328M; SAE J121, J419, J1237; ASTM E340; ASTM E381, E407; SAE J78, J81, J429, J1195; ASTM E384; ISO 6507-1; ASME B18.16.M; IFI 100/107, 124/125, 524/525; ISO 15330, 2320; ASME B18.6.3; FIP 1000; ISO 7085; SAE J78, J81, J933, J1237; IFI 100/107; ASME B18.16M; ASME B18.21.1; ASTM F837/F837M; SAE J995; ISO 6157-1, 6157-3; SAE J429, J1199; ISO 898-1 | metals; fasteners | - |
| 3 | SAE J995; SAE J1199; SAE J429; ISO 898-1; ASME B18.13; ISO 898-2; ISO 2702; ISO 898-5; J429; J1195; ISO 2320 | Hardness; Hydrogen Embrittlement (Stress Durability); Internal-Thread Proof Load; Metallographic Evaluation; Case Depth; Depth of Decarburization; Microetching; Prevailing Torque | - |
| 4 | ISO/IEC 17025:2017 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Other Locations
2 other sites in this organization
Labs with overlapping accredited scope in United States
- AADFW, Inc.Euless, TXA2LAShares 1 accredited test methodASTM B487
- ACT Test ServicesHillsdale, MIA2LAShares 1 accredited test methodASTM B487
- Anachem Laboratories LLCEl Segundo, CAA2LAShares 1 accredited test methodASTM B487
- Applied Technical ServicesMarietta, GAA2LAShares 1 accredited test methodASTM B487
- Briem EngineeringSaint Louis, MOA2LAShares 1 accredited test methodASTM B487
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.