RIO GmbH
Birlenbacher Straße 169, 57078, Siegen, Germany
Visit website- Accredited standards
- 48
- DAKKS certificates
- 3
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 48 standard numbers and the 37 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO27
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 1463Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
ISO 2178Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2409Paints and varnishes - Cross-cut test
ISO 2639Steels - Determination and verification of the depth of carburized and hardened cases
ISO 2808Paints and varnishes - Determination of film thickness
ISO 2812-1Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water
ISO 3231Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
ISO 3795Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 4405Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the gravimetric method
Show all 27
ISO 6270-1Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure)
ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6509-1Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 6988Metallic and other non organic coatings - Sulfur dioxide test with general condensation of moisture
ISO 9220Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 10289Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests
ISO 11997-1Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid
ISO 16232Road vehicles - Cleanliness of components and systems
ISO 16925Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting
ISO 20567-1Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
ISO 22479Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method)
DIN6
DIN 50018
DIN 50905-4
DIN 50916-1
DIN 51451
DIN 55635
DIN 75200
ISO 4628 series6
ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO 4628-5Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
IEC 60068 series3
IEC 60068-2-1Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-11Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
IEC 60068-2-52Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 62321 series3
IEC 62321-4
IEC 62321-5
IEC 62321-7-1
Other standards3
ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM G87
EN 10328
DIN EN ISO 643 2020-06; DIN EN ISO 2178 2016-11; DIN EN ISO 1463 2021 -08; DIN EN ISO 9220 2022 -05; DIN EN ISO 2808 2019 -12
DIN EN ISO 9227 2017-07 S2 DIN EN 60068-2-11; DIN EN ISO 6270-1 2018-04 S2 DIN EN ISO 6270-2 2018-04 S2; DIN EN ISO 2409 2020-12 S2; DIN EN ISO 20567-1 2017-07 S2 Beständigkeit gegen Druckwasserstrahl DIN EN ISO 16925 2022-06 S2; DIN EN 60068-2-1
DIN EN ISO 6892 -1 2020 -06; DIN EN ISO 6506 -1 2015 -02; DIN EN ISO 6507 -1 2018 -07; DIN EN ISO 2639 2003 -04; DIN EN 10328 2005 -04
DIN EN ISO 6509-1 2014-09 S1 AS 2345 2006 S1; DIN EN ISO 3651-1 1998-08 S1 DIN EN ISO 3651-2 1998-08 S1 ASTM A 262 2015 S1 Metalle Korrosionsverhalten DIN 50905-4 2018-03 S1; DIN EN ISO 2812-1 2018-03 S1; DIN EN ISO 4628-1 2016-07 S2 DIN EN ISO 4628-2 2016-07 S2 DIN EN ISO 4628-3 2016-07 S2 DIN EN ISO 4628-4 2016-07 S2 DIN EN ISO 4628-5 2016-07 S2 DIN EN ISO 4628-8 2013-03 S2 DIN EN ISO 10289 2001-04 S2; DIN 50916-1
DIN EN ISO 11997-1 2018-01 S2 DIN EN IEC 60068-2-52; DIN EN ISO 3231 1998-02 S1 DIN EN ISO 22479 2022-08 S1 DIN 50018 2013-05 S1 DIN EN ISO 6988 1997-03 S1 ASTM G 87 2002 S1; DIN EN IEC 60068-2-52; DIN 55635; DIN 50018
DIN 75200; ISO 3795 1989-10 DIN 75200 1980-09; en 6
ISO 16232 2018-12 Road vehicles - Cleanliness of components and systems ISO 4405 2022-07
DIN EN 62321 -4 VDE 0042-1-4 2018-05; DIN EN 62321 -5 VDE 0042-1-5 2014-10; DIN EN 62321 -7-1 VDE 0042-1-7-1 2016-09; DIN 51451; VDE 0042-1-4
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
11 lines
ISO/IEC 17025
ActiveD-PL-17376-01-00
ISO/IEC 17025
ActiveD-PL-17376-01-01
ISO/IEC 17025
ActiveD-PL-17376-01-02
Location
Labs with overlapping accredited scope in Germany
- SGS INSTITUT FRESENIUSTaunusstein · ~83 kmDAKKSShares 3 accredited methods and materialsDIN 75200MetalWater
- PHOENIX TESTLABBlomberg · ~137 kmDAKKSShares 3 accredited methods and materialsEN 60068-2-1MetalWater
- Horn & Co. AnalyticsWenden · ~8 kmDAKKSShares 2 accredited materialsMetalWater
- Chemisches und mikrobiologisches Institut UEGWetzlar · ~56 kmDAKKSShares 2 accredited materialsMetalWater
- Labor Dr. Fülling GmbH & Co. KGRemscheid · ~64 kmDAKKSShares 2 accredited materialsMetalWater
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.