Registers refreshed 2026-11-08.See refresh dates
France

CENTRE DE VERIFICATION DE METZ

ZA DE PLESNOIS 15 RUE DE L'ETANG, 57140, PLESNOIS, France

COFRAC 1-1934ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
23
COFRAC certificate
1
Site in our directory
1
COFRAC accredited scope

What this lab is accredited for

Our reading of the COFRAC scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 23 standard numbers and the 15 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO12
ISO 148-2Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 4545-2Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines
ISO 4965-1Metallic materials - Dynamic force calibration for uniaxial fatigue testing - Part 1: Testing systemsSome methods

Limits written next to it

ISO 4965-1 - méthode A

Some methods. Written next to it on line 2 of COFRAC certificate 1-1934.

ISO 6506-2Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
ISO 6506-3Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks
ISO 6507-2Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines
ISO 6508-2Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters
ISO 6508-3Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks
ISO 7500-1Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
ISO 7500-2Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force
ISO 9513Metallic materials - Calibration of extensometer systems used in uniaxial testing
ASTM11
ASTM A956
ASTM E4
ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E83
ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM E399
ASTM E467
ASTM E1012
ASTM E2309
ASTM E2658

Read from the scope as published by COFRAC. Register refreshed 2026-11-06.

Scope as published by COFRAC

4 lines
COFRAC

ISO/IEC 17025

Active

1-1934

View scope

Accredited scope, certificate 1-1934

LineMethodMatrixRange
1NF EN ISO/IEC 17025EQUIPEMENTS INDUSTRIELS ET PRODUITS D'INGENIERIE / MACHINES D'ESSAIS MECANIQUES-
2NF EN ISO 7500-1; ASTM E4; NF EN ISO 9513; ASTM E2309 / E2309M; ASTM E2658; Méthode interne* PR 7.2-12; ISO 4965-1; ASTM E467; NF EN ISO 7500-2; ASTM E1012Machines de traction; Machines de compression; Machines de fatigue; Machines de fluage-
3NF EN ISO 9513; ASTM E83; NF EN ISO 527-1; ASTM E399; NF EN ISO 148-2; NF EN ISO 6506-2; ASTM E10; NF EN ISO 6508-2; ASTM E18; NF EN ISO 6506-3; NF EN ISO 6508-3; Méthode interne* PR 7.2-13--
4NF EN ISO 6507-2; ASTM E92; NF EN ISO 4545-2; ASTM E92; ASTM A956/A956MMachines de dureté VICKERS; Machines de dureté KNOOP; Machines de dureté par rebond-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

ZA DE PLESNOIS 15 RUE DE L'ETANG, PLESNOIS, 57140, FR

49.17405, 6.10762

Open in Maps
← All accredited testing labs in France

Labs with overlapping accredited scope in France

Accreditation data refreshed from the COFRAC register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the COFRAC entry linked above.