Salzgitter Mannesmann Forschung GmbH Standort Duisburg
Ehinger Straße 200, 47259, Duisburg, Germany
- Accredited standards
- 61
- DAKKS certificates
- 4
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 61 standard numbers and the 41 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO28
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 204Metallic materials - Uniaxial creep testing in tension - Method of test
ISO 642Steel - Hardenability test by end quenching (Jominy test)
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 3057Non-destructive testing - Metallographic replica techniques of surface examination
ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
ISO 3887Steels - Determination of the depth of decarburization
ISO 4892-2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 4967Steel - Determination of the non-metallic inclusion content - Micrographic method
ISO 5173Destructive tests on welds in metallic materials - Bend tests
Show all 28
ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
ISO 7438Metallic materials - Bend test
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 9809-1Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa
ISO 9809-2Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa
ISO 11119-2Gas cylinders - Design, construction and testing of refillable composite gas cylinders and tubes - Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
ISO 11439Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
ISO 12135Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 15653Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
ISO 21809-1Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
ISO 21809-2Oil and gas industries including lower carbon energy - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single-layer fusion-bonded epoxy coatings
ASTM14
ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A763
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E45Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E112Standard Test Methods for Determining Average Grain Size
ASTM E562Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E1351
ASTM G28
ASTM G36
ASTM G39
ASTM G46
ASTM G48Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G78
DIN7
DIN 30670-1
DIN 30670-2
DIN 30678-1
DIN 50106
DIN 50602
DIN 50915
DIN 54150
ISO 7539 series6
ISO 7539-1Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures
ISO 7539-2Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimens
ISO 7539-3Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens
ISO 7539-4Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens
ISO 7539-5Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens
ISO 7539-7Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing
EN4
EN 10229
EN 10247
EN 10274
EN 12245
Other standards2
BS 8571
BS 8701
ASTM A 370 -19e1; DIN EN ISO 642; BS 8571; DIN EN ISO 15653; ISO 12135; ASTM E 8/E 8M -16ae1; DIN EN ISO 6892 -1; DIN EN ISO 6892 -2; DIN 50106; DIN EN ISO 148 -1
DIN EN 10274; API RP 5L3; DIN EN ISO 6506 -1; DIN EN ISO 6507 -1; DIN EN ISO 6508 -1; DIN EN ISO 5173; DIN EN ISO 7438; DNV -OS -F101; DIN EN ISO 204
DIN EN ISO 643 2020-06 DIN EN ISO 3887 2018-05 DIN EN 10247 2017-09; DIN EN ISO 6507-1 Metallic materials - Vickers hardness test - Part 1: Test method 2018-07 Valid from: Date of issue: 04; DIN EN 10229 Evaluation of resistance of steel products to hydrogen induced cracking 1998-11; DIN 50602; ISO 643 2020-06 DIN EN ISO 3887 2018-05 DIN EN 10247 2017-09
ASTM E 45 -18a; ASTM E112 -24; ASTM E 562 -19; ASTM E 1351 -01 (2012); DIN 50602; DIN 54150; DIN EN 10247; DIN EN ISO 643; DIN EN ISO 3887; ISO 3057; ISO 4967; A-EDWW -007; A-EDWW -010
DIN 30670 -2; DIN 30678 -1; DIN EN ISO 1133 -1; DIN EN ISO 4892 -2; DIN EN ISO 6270 -2; DIN EN ISO 9227; DIN EN ISO 21809 -2; ISO 21809 -1; A-EDWW -005
NACE Standard TM0284; NACE Standard TM0316; ASTM A 262 -15; ASTM A 763 -15; ASTM G 28 -22; ASTM G 36 -94(2018); ASTM G 46 -21; ASTM G 48 -11(2021); ASTM G 78 -20; DIN EN ISO 3651 -1; DIN EN ISO 3651 -2; DIN 30670 -1
DIN EN 12245; DIN EN ISO 9809 -1; DIN EN ISO 9809 -2
DIN EN ISO 11439; ISO 11119-2
ASTM E 45
ASTM G 39 -99 (2021); BS 8701; DIN 50915; DIN EN ISO 7539 -1; DIN EN ISO 7539 -2; DIN EN ISO 7539 -3; DIN EN ISO 7539 -4; DIN EN ISO 7539 -5; DIN EN ISO 7539 -7; EFC Publ. No. 16; NACE Standard TM0177
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
17 lines
ISO/IEC 17025
ActiveD-PL-11278-01-00
ISO/IEC 17025
ActiveD-PL-11278-01-01
ISO/IEC 17025
ActiveD-PL-11278-01-02
ISO/IEC 17025
ActiveD-PL-11278-01-03
Location
Labs with overlapping accredited scope in Germany
- HWD Haase Werkstoffprüfung DuisburgDuisburg · ~2 kmDAKKSShares 1 accredited materialMetal
- GWQ GmbH & Co.KGMoers · ~12 kmDAKKSShares 1 accredited materialMetal
- CHEMADDuisburg · ~14 kmDAKKSShares 1 accredited materialMetal
- ALBO-tec Technologiezentrum für Analytik und Bodenmechanik Gesellschaft mit beschränkter HaftungMülheim an der Ruhr · ~14 kmDAKKSShares 1 accredited materialMetal
- GMA-WerkstoffprüfungDüsseldorf · ~15 kmDAKKSShares 1 accredited materialMetal
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.