Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung eingetragener Verein Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung IFAM, Teilinstitut Dresden
Winterbergstraße 28, 01277, Dresden, Germany
- Accredited standards
- 25
- DAKKS certificates
- 2
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 25 standard numbers and the 18 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO18
ISO 2738Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
ISO 3369Impermeable sintered metal materials and hardmetals - Determination of density
ISO 3923-1Metallic powders - Determination of apparent density - Part 1: Funnel method
ISO 3953Metallic powders - Determination of tap density
ISO 4490Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
ISO 4491-4Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction
ISO 4498Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7526Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion
Show all 18
ISO 9277Determination of the specific surface area of solids by gas adsorption - BET method
ISO 13320Particle size analysis - Laser diffraction methods
ISO 13322-2Particle size analysis - Image analysis methods - Part 2: Dynamic image analysis methods
ISO 13517Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
ISO 15351Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)
ISO 21068-3Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
DIN6
DIN 50106
DIN 50134
DIN 51045-1
DIN 51045-2
DIN 51913
DIN 54387-3
Other standards1
EN 623-2
DIN EN ISO 2738; DIN EN ISO 3369; DIN EN 623 -2; DIN EN ISO 3923 -1; DIN EN ISO 3953; DIN 51913; DIN EN ISO 4490; DIN EN ISO 13517; DIN ISO 9277; ISO 13320; ISO 13322 -2
DIN EN ISO 4491-4; DIN 54387-3; DIN EN ISO 15351; DIN EN ISO 21068-3; DIN EN ISO 7526
DIN EN ISO 6892-1; DIN 50106; DIN 50134; DIN EN ISO 6506-1; DIN EN ISO 6507-1; DIN EN ISO 6508-1; DIN EN ISO 4498
DIN 51045-1; DIN 51045-2
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
6 lines
ISO/IEC 17025
ActiveD-PL-11140-06-01
Accredited scope, certificate D-PL-11140-06-01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | DIN EN ISO 6892-1; DIN 50106; DIN 50134; DIN EN ISO 6506-1; DIN EN ISO 6507-1; DIN EN ISO 6508-1; DIN EN ISO 4498 | metallische Werkstoffe; anorganische Pulver und Sinterwerkstoffe | - |
| 3 | DIN EN ISO 2738; DIN EN ISO 3369; DIN EN 623 -2; DIN EN ISO 3923 -1; DIN EN ISO 3953; DIN 51913; DIN EN ISO 4490; DIN EN ISO 13517; DIN ISO 9277; ISO 13320; ISO 13322 -2 | Sintermetalle; Hartmetalle; Hochleistungskeramik; Metallpulver; Kohlenstoffmaterialien; Feststoffe | - |
| 4 | DIN 51045-1; DIN 51045-2 | fester Körper; gebrannter feinkeramischer Werkstoffe | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
ISO/IEC 17025
ActiveD-PL-11140-06-02
Accredited scope, certificate D-PL-11140-06-02
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | DIN EN ISO 4491-4; DIN 54387-3; DIN EN ISO 15351; DIN EN ISO 21068-3; DIN EN ISO 7526 | Metallpulver; keramische Roh- und Werkstoffe; Stahl und Eisen; Siliciumcarbid enthaltende Rohstoffe und feuerfeste Erzeugnisse; Ferronickel | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Labs with overlapping accredited scope in Germany
- CEWUS Chemnitzer Werkstoff- und Oberflächentechnik GmbH CEWUS Erstes Chemnitzer Werkstoff- und SchadensanalyselaborChemnitzDAKKSShares 1 accredited test methodISO 6892-1
- GWP Gesellschaft für Werkstoffprüfung mbHZorneding-PöringDAKKSShares 1 accredited test methodISO 6892-1
- Kiwa GmbHBerlinDAKKSShares 1 accredited test methodISO 6892-1
- SWS WerkstoffprüfungNetzschkauDAKKSShares 1 accredited test methodISO 6892-1
- Techno LaborBottropDAKKSShares 1 accredited test methodISO 6892-1
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.