Equistar Chemicals L.P. a LyondellBasell Company
11530 Northlake Drive, 45249, Cincinnati, OH, United States
Visit website- Accredited standards
- 20
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 20 standard numbers and the 14 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO12
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 178Plastics - Determination of flexural properties
ISO 179-2Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test
ISO 180Plastics - Determination of Izod impact strength
ISO 294-4Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 3795Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 6603-2Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing
ISO 13477Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)
ISO 18488Polyethylene (PE) materials for piping systems - Determination of strain hardening modulus in relation to slow crack growth - Test method
ASTM8
ASTM D256
ASTM D638Standard Test Method for Tensile Properties of Plastics
ASTM D648
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D1238
ASTM D1598
ASTM D3763
ASTM F1473
ASTM D638; ISO 527-1,2; ASTM D648, Method B; ISO 75-1, -2; ASTM D790; ISO 178; ASTM D3763; ASTM D256, Method A; ISO 180/A; ISO 179-2; ASTM D1238; ISO 1133-1; ISO 1183-1, Method A; ISO 294-4, PT-STM-IN-001; ISO 3795
ISO 6603-2; ASTM F1473; ISO 13477; ASTM D1598; ISO 18488
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
3 lines
ISO/IEC 17025
Active3132.01
The scope document we hold says it is valid until 2027-07-31.
Accredited scope, certificate 3132.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM D638; ISO 527-1,2; ASTM D648, Method B; ISO 75-1, -2; ASTM D790; ISO 178; ASTM D3763; ASTM D256, Method A; ISO 180/A; ISO 179-2; ASTM D1238; ISO 1133-1; ISO 1183-1, Method A; ISO 294-4, PT-STM-IN-001; ISO 3795 | molded polymers | - |
| 2 | ISO 6603-2; ASTM F1473; ISO 13477; ASTM D1598; ISO 18488 | Rigid Plastics; Polyethylene Pipes and Resins; Plastic Pipe | - |
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
EQUISTAR CHEMICALS L.P.
A LYONDELLBASELL COMPANY
Cincinnati, OH
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 23rd day of July 2025.
__ _____________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 3132.01
Valid to July 31, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- Touchstone Testing Laboratory, LLCTriadelphia, WV · ~349 kmA2LAShares 1 accredited test methodASTM D638
- NSF InternationalAnn Arbor, MI · ~359 kmA2LAShares 1 accredited test methodASTM D638
- Nelson TestingElmhurst, IL · ~425 kmA2LAShares 1 accredited test methodASTM D638
- Element Materials Technology BaltimoreHunt Valley, MD · ~677 kmA2LAShares 1 accredited test methodASTM D638
- EUROFINS ELECTRICAL AND ELECTRONIC TESTING NABaltimore, MD · ~681 kmA2LAShares 1 accredited test methodASTM D638
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.