Registers refreshed 2026-11-08.See refresh dates
Germany

MeßTechnikNord

Prüssingstraße 41, 07745, Jena, Germany

Visit website
DAKKS D-PL-15086-02-01DAKKS D-PL-15086-02-02ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
1
DAKKS certificates
2
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 1 standard number and the 1 official name we hold. When no standard matches, it searches the method text of every scope line.

ISO 6789-2Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

8 lines
DAKKS

ISO/IEC 17025

Active

D-PL-15086-02-01

View scope

Accredited scope, certificate D-PL-15086-02-01

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--
2-Pressure; Torque; Weighing instruments; Temperature quantities; Direct reading thermometers; Humidity quantities; Devices for relative humidity
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

Annex to the Partial Accreditation Certificate D-K-15086-01-02 Valid from: 27.02.2025 Date of issue: 27.02.2025 Page 2 of 4 This document is a translation. The definitive version is the original German annex to the accreditation certificate. Calibration in the fields: Mechanical quantities − Pressure − Torque − Weighing instruments a) Thermodynamic quantities Temperature quantities − Direct reading thermometers Humidity quantities − Devices for relative humidity a) only on-site calibration Within the measurands/calibration items marked with * the calibration laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use calibration standards or equivalent calibration procedures listed here with different issue dates. The calibration laboratory maintains a current list of all calibration standards / equivalent calibration procedures within the flexible scope of accreditation.
-
3DIN EN ISO 6789- 2:2017; ISO 6789- 2:2017; EN ISO 6789- 2:2017-See scope document
4EURAMET Calibration Guide No. 18 Version 4.0 (11/2015)-to 10 kg

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-15086-02-02

View scope

Accredited scope, certificate D-PL-15086-02-02

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--
2-Pressure; Torque; Weighing instruments; Temperature quantities; Direct reading thermometers; Humidity quantities; Devices for relative humidity
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

Annex to the Partial Accreditation Certificate D-K-15086-01-02 Valid from: 27.02.2025 Date of issue: 27.02.2025 Page 2 of 4 This document is a translation. The definitive version is the original German annex to the accreditation certificate. Calibration in the fields: Mechanical quantities − Pressure − Torque − Weighing instruments a) Thermodynamic quantities Temperature quantities − Direct reading thermometers Humidity quantities − Devices for relative humidity a) only on-site calibration Within the measurands/calibration items marked with * the calibration laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use calibration standards or equivalent calibration procedures listed here with different issue dates. The calibration laboratory maintains a current list of all calibration standards / equivalent calibration procedures within the flexible scope of accreditation.
-
3DIN EN ISO 6789- 2:2017; ISO 6789- 2:2017; EN ISO 6789- 2:2017-See scope document
4EURAMET Calibration Guide No. 18 Version 4.0 (11/2015); OIML R 111-1:2004Nonautomatic weighing instrumentsto 10 kg

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Prüssingstraße 41, Jena, 07745, DE

50.88762, 11.59739

Open in Maps
← All accredited testing labs in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.