Huntsman Polyurethanes
2190 Executive Hills Boulevard, 48326, Auburn Hills, MI, United States
Visit website- Accredited standards
- 36
- A2LA certificates
- 2
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 36 standard numbers and the 17 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM23
ASTM D256
ASTM D570
ASTM D618
ASTM D624
ASTM D638Standard Test Method for Tensile Properties of Plastics
ASTM D648
ASTM D695
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D1004
ASTM D1525
ASTM D1938
ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness
Show all 23
ASTM D2344
ASTM D3278
ASTM D3574Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Polyurethane Foams
ASTM D4052Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D4274
ASTM D4672
ASTM D4878
ASTM D4889
ASTM D5155
ASTM D6979
ASTM E200
ISO12
ISO 178Plastics - Determination of flexural properties
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 845Cellular plastics and rubbers - Determination of apparent density
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1798Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
ISO 1856Flexible cellular polymeric materials - Determination of compression set
ISO 2440Flexible and rigid cellular polymeric materials - Accelerated ageing tests
ISO 3386-1Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 3795Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 4674-1Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods
ISO 8067Flexible cellular polymeric materials - Determination of tear strength
Other standards1
DIN 75201
ASTM D695, D3574, ISO 1856, ISO 3386-1, Satra TM 64, VW PV3919, FORD BN 115-07; ASTM D3574, ASTM D2240; ASTM D256, D3763; ASTM D638, D412, D882, D3574, ISO 527, ISO 1798; ASTM D3574, D792, D297, ISO 845, ISO 1183, ISO 3451-1; ASTM D790, D1052, ISO 178; FMVSS 302, ISO 3795, SAE J369, FORD BN024-2, UL 94 HB, HBF, 20mm VBT, DBL 5307, GMW3232, GB 8410; ASTM D570, D471
ASTM D3574 (Test H); ASTM D3574 (Test N); ASTM D624; ASTM D1938; ASTM D3574 (Test F); ISO 8067; ISO 4674-1; ASTM D1525; ASTM D648 (Method B); ASTM D1004; ASTM D2344; SAE J1351; GMW3205; SAE J1756; GMW3235; DIN 75201; ASTM D3574 (Test J, K, and L); ISO 2440; CAL TB 117:2013 (Section 3); ASTM D618; Ford WSS M15P20-B1/B2 (Test 3.3.13)
ASTM D4672; ASTM D3278; ASTM D4878; ASTM D4052; ASTM D4889; ASTM E200; ASTM D5155; ASTM D6979; ASTM D4274; ISO/IEC 17025:2017
Read from the A2LA scope documents we downloaded on 2026-10-27. Register refreshed 2026-11-06.
Scope as published by A2LA
5 lines
ISO/IEC 17025
Active290.03
The scope document we hold says it is valid until 2028-06-30.
Accredited scope, certificate 290.03
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM D4672; ASTM D3278; ASTM D4878; ASTM D4052; ASTM D4889; ASTM E200; ASTM D5155; ASTM D6979; ASTM D4274; ISO/IEC 17025:2017 | organic isocyanates; polyols; polyol blends; polyurethane raw materials and components | - |
| 2 | ISO/IEC 17025:2017 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
ISO/IEC 17025
Active290.04
The scope document we hold says it is valid until 2028-06-30.
Accredited scope, certificate 290.04
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM D695, D3574, ISO 1856, ISO 3386-1, Satra TM 64, VW PV3919, FORD BN 115-07; ASTM D3574, ASTM D2240; ASTM D256, D3763; ASTM D638, D412, D882, D3574, ISO 527, ISO 1798; ASTM D3574, D792, D297, ISO 845, ISO 1183, ISO 3451-1; ASTM D790, D1052, ISO 178; FMVSS 302, ISO 3795, SAE J369, FORD BN024-2, UL 94 HB, HBF, 20mm VBT, DBL 5307, GMW3232, GB 8410; ASTM D570, D471 | flexible, semi-flexible, and rigid cellular plastics and elastomeric materials, reinforced and non-reinforced elastomeric materials, reinforced and non-reinforced plastics | - |
| 2 | ASTM D3574 (Test H); ASTM D3574 (Test N); ASTM D624; ASTM D1938; ASTM D3574 (Test F); ISO 8067; ISO 4674-1; ASTM D1525; ASTM D648 (Method B); ASTM D1004; ASTM D2344; SAE J1351; GMW3205; SAE J1756; GMW3235; DIN 75201; ASTM D3574 (Test J, K, and L); ISO 2440; CAL TB 117:2013 (Section 3); ASTM D618; Ford WSS M15P20-B1/B2 (Test 3.3.13) | - | - |
| 3 | ISO/IEC 17025:2017 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.