Registers refreshed 2026-11-08.See refresh dates
Poland

Główny Instytut Górnictwa - Państwowy Instytut Badawczy

Plac Gwarków 1, 40-166, Katowice, Poland

PCA AB 005ISO/IEC 17025Register refreshed 2026-11-06
One of 2 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
264
PCA certificate
1
Sites in our directory
2
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 264 standard numbers and the 166 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO125
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 62Plastics - Determination of water absorption
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 252Conveyor belts - Adhesion between constitutive elements - Test methods
ISO 283Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
ISO 284Conveyor belts - Electrical conductivity - Specification and test method
ISO 306Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 334Coal and coke - Determination of total sulfur - Eschka method
ISO 340Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
ISO 501Hard coal - Determination of the crucible swelling number
ISO 540Hard coal - Determination of ash fusibility
Show all 125
ISO 562Hard coal and coke - Determination of volatile matter
ISO 580Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
ISO 587Coal and coke - Determination of chlorine using Eschka mixture
ISO 589Hard coal - Determination of total moisture
ISO 604Plastics - Determination of compressive properties
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 898-2Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1171Coal and coke - Determination of ash
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1402Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO 1461Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods
ISO 1928Coal and coke - Determination of gross calorific value
ISO 1953Coal - Size analysis by sieving
ISO 2176Petroleum products - Lubricating grease - Determination of dropping point
ISO 2505Thermoplastics pipes - Longitudinal reversion - Test method and parameters
ISO 3108Steel wire ropes - Test method - Determination of measured breaking force
ISO 3126Plastics piping systems - Plastics components - Determination of dimensions
ISO 3127Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method
ISO 3154Stranded wire ropes for mine hoisting - Technical delivery requirements
ISO 3386-1Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials
ISO 3386-2Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials
ISO 3744Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
ISO 3746Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
ISO 4589-2Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
ISO 4671Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
ISO 5068Brown coals and lignites - Determination of moisture content - Indirect gravimetric method
ISO 5074Hard coal - Determination of Hardgrove grindability index
ISO 5814Water quality - Determination of dissolved oxygen - Electrochemical probe method
ISO 5815-1Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition
ISO 5893Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification
ISO 6259-1Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
ISO 6259-3Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes
ISO 6332Water quality - Determination of iron - Spectrometric method using 1,10-phenanthroline
ISO 6468Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction
ISO 6878Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7027-1Water quality - Determination of turbidity - Part 1: Quantitative methods
ISO 7404-3Coal - Methods for petrographic analysis - Part 3: Method of determining maceral group composition
ISO 7404-5Coal - Methods for petrographic analysis - Part 5: Method of determining microscopically the reflectance of vitrinite
ISO 7619-1Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 7800Metallic materials - Wire - Simple torsion test
ISO 7801Metallic materials - Wire - Reverse bend test
ISO 7887Water quality - Examination and determination of colour
ISO 8031Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
ISO 8256Plastics - Determination of tensile-impact strength
ISO 8467Water quality - Determination of permanganate index
ISO 9277Determination of the specific surface area of solids by gas adsorption - BET method
ISO 9280Water quality - Determination of sulfate - Gravimetric method using barium chloride
ISO 9297Water quality - Determination of chloride - Silver nitrate titration with chromate indicator (Mohr's method)
ISO 9377-2Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography
ISO 9562Water quality - Determination of adsorbable organically bound halogens (AOX)
ISO 9613-2Acoustics - Attenuation of sound during propagation outdoors - Part 2: Engineering method for the prediction of sound pressure levels outdoors
ISO 9773Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small flame ignition source
ISO 9852Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method
ISO 9963-1Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity
ISO 9967Thermoplastics pipes - Determination of creep ratio
ISO 9969Thermoplastics pipes - Determination of ring stiffness
ISO 10301Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods
ISO 10381-5Soil quality - Sampling - Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination
ISO 10390Soil, treated biowaste and sludge - Determination of pH
ISO 10523Water quality - Determination of pH
ISO 10694Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
ISO 10847Acoustics - In-situ determination of insertion loss of outdoor noise barriers of all types
ISO 11173Thermoplastics pipes - Determination of resistance to external blows - Staircase method
ISO 11277Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
ISO 11357-6Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11369Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
ISO 11423-1Water quality - Determination of benzene and some derivatives - Part 1: Head-space gas chromatographic method
ISO 11501Plastics - Film and sheeting - Determination of dimensional change on heating
ISO 11732Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection
ISO 11885Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 12091Structured-wall thermoplastics pipes - Oven test
ISO 13260Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
ISO 13320Particle size analysis - Laser diffraction methods
ISO 13605Solid mineral fuels - Major and minor elements in coal ash and coke ash - Wavelength dispersive x-ray fluorescence spectrometric method
ISO 13877Soil quality - Determination of polynuclear aromatic hydrocarbons - Method using high -performance liquid chromatography
ISO 13967Thermoplastics fittings - Determination of ring stiffness
ISO 13968Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
ISO 14125Fibre-reinforced plastic composites - Determination of flexural properties
ISO 14402Water quality - Determination of phenol index by flow analysis (FIA and CFA)
ISO 14403-2Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA)
ISO 15061Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions
ISO 15178Soil quality - Determination of total sulfur by dry combustion
ISO 15630-3Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
ISO 15705Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
ISO 16265Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA)
ISO 16703Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
ISO 16948Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen
ISO 16994Solid biofuels and pyrogenic biocarbon - Determination of sulfur and chlorine content
ISO 17294-2Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
ISO 17852Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
ISO 17892-11Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
ISO 17993Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extractionExclusion

Limits written next to it

PN-EN ISO 17993:2005 excluding pt

Exclusion. Written next to it on line 108 of PCA certificate AB 005.

ISO 18122Solid biofuels - Determination of ash content
ISO 18123Solid biofuels - Determination of volatile matter
ISO 18125Solid biofuels - Determination of calorific value
ISO 18134-2Solid biofuels - Determination of moisture content - Part 2: Simplified method
ISO 18134-3Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample
ISO 18227Environmental solid matrices - Determination of elemental composition by X-ray fluorescence spectrometry
ISO 18412Water quality - Determination of chromium(VI) - Photometric method for weakly contaminated water
ISO 19458Water quality - Sampling for microbiological analysis
ISO 19893Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
ISO 20236Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion
ISO 20238Conveyor belts - Drum friction testing
ISO 21654Solid recovered fuels - Determination of calorific value
ISO 21656Solid recovered fuels - Determination of ash content
ISO 21660-3Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
ISO 21663Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
ISO 22155Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method
ISO 22167Solid recovered fuels - Determination of content of volatile matter
ISO 80079-36Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements
EN47
EN 295-3
EN 727
EN 744
EN 761
EN 872Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
EN 903Water quality. Determination of anionic surfactants by measurement of the methylene blue index MBAS
EN 1149-1
EN 1149-2
EN 1228
EN 1337-3
EN 1484Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
EN 1804-2
Show all 47
EN 1804-3
EN 1899-2Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples
EN 1926
EN 1936
EN 9969
EN 10244-2
EN 12293
EN 12372
EN 12390-3Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12457-2Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
EN 12457-4Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
EN 12673Water quality - Gas chromatographic determination of some selected chlorophenols in water
EN 12873-1
EN 12927
EN 13577
EN 13657Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements
EN 13755
EN 15216Environmental solid matrices - Determination of total dissolved solids (TDS) in water and eluates
EN 15309
EN 15408Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
EN 15934Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content
EN 15935Soil, waste, treated biowaste and sludge - Determination of loss on ignition
EN 15936Soil, waste, treated biowaste and sludge - Determination of total organic carbon (TOC) by dry combustion
EN 16174Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements
EN 16350
EN 21644
EN 25663Water quality - Determination of Kjeldahl nitrogen - Method after mineralization with selenium
EN 26777Water quality - Determination of nitrite - Molecular absorption spectrometric method
EN 27888Water quality - Determination of electrical conductivity
EN 50182
EN 50183
EN 50189
EN 50326
EN 50397-1
EN 50540
IEC13
IEC 60079-0
IEC 60079-32-2
IEC 60695-11-10
IEC 60889
IEC 61089

Certificate says IEC 1089. Probably the same standard; not checked against the EN document.

IEC 61284
IEC 61395
IEC 61854
IEC 62219
IEC 62420
IEC 62567
IEC 62641
IEC 63248
IEC 61340 series6
IEC 61340-2-3
IEC 61340-4-1
IEC 61340-4-3
IEC 61340-4-5
IEC 61340-4-9
IEC 61340-4-10
ISO 527 series5
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-5Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
ISO 5667 series5
ISO 5667-4Water quality - Sampling - Part 4: Guidance on sampling from lakes, natural and man-made
ISO 5667-5Water quality - Sampling - Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems
ISO 5667-6Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams
ISO 5667-10Water quality - Sampling - Part 10: Guidance on sampling of waste water
ISO 5667-11Water quality - Sampling - Part 11: Guidance on sampling of groundwaters
ISO 1167 series4
ISO 1167-1Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
ISO 1167-2Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces
ISO 1167-3Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components
ISO 1167-4Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies
EN 12814 series3
EN 12814-1
EN 12814-2
EN 12814-8
IEC 60794 series3
IEC 60794-1-21
IEC 60794-1-22
IEC 60794-4-10
ISO 10304 series3
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 10304-3Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
ISO 10304-4Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination
ISO 2507 series3
ISO 2507-1Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method
ISO 2507-2Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
ISO 2507-3Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
ISO 75 series3
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 75-3Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
Other standards44
ASTM D7401
ASTM F432
DIN 21530-4
DIN 22252
G-04584:2001
PN-B-02170
PN-B-02171
PN-C-89071
PN-E-05203
PN-G-04035
PN-G-04302
PN-G-04303
Show all 44
PN-G-04304
PN-G-04305
PN-G-04502
PN-G-04508
PN-G-04511
PN-G-04516:1998
PN-G-04537
PN-G-04558
PN-G-04560:1998
PN-G-04565
PN-G-04571:1998
PN-G-04582
PN-G-04611
PN-G-06021
PN-G-15000-9
PN-G-15000-12
PN-G-15022
PN-G-15023
PN-G-15024
PN-G-15026
PN-G-15050
PN-G-15092
PN-G-15533
PN-G-15536
PN-G-15541
PN-G-32000
PN-G-46701
PN-G-46705
PN-M-46606
PN-R-04031
PN-Z-04008-7:2002
PN-Z-04008-7:2002+Az1:2004

Read from the PCA scope document we downloaded on 2026-02-11. Register refreshed 2026-11-06.

Scope as published by PCA

138 lines
PCA

ISO/IEC 17025

Active

AB 005

The scope document we hold says it is valid until 2026-12-30.

View on PCA

Location

Plac Gwarków 1, Katowice, 40-166, PL

50.27069, 19.02621

Open in Maps

Other Locations

1 other site in this organization

Mikołów, PL
View
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.