Registers refreshed 2026-11-08.See refresh dates
Italy

Centro Qualità Carta - Unità operativa di LUCENSE SCaRL

Traversa prima di Via della Chiesa di Sorbano del Giudice n.231, 55100, Lucca, Italy

Visit website
ACCREDIA 00074ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
44
ACCREDIA certificate
1
Site in our directory
1
ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 44 standard numbers and the 36 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO29
ISO 287Paper and board - Determination of moisture content of a lot - Oven-drying method
ISO 302Pulps - Determination of Kappa number
ISO 534Paper and board - Determination of thickness, density and specific volume
ISO 535Paper and board - Determination of water absorptiveness - Cobb method
ISO 536Paper and board - Determination of grammage
ISO 1762Paper, board, pulps and cellulose nanomaterials - Determination of residue (ash content) on ignition at 525 °C
ISO 1974Paper - Determination of tearing resistance - Elmendorf method
ISO 2234Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load
ISO 2470-1Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
ISO 2470-2Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 2: Outdoor daylight conditions (D65 brightness)
ISO 2471Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method
ISO 2758Paper - Determination of bursting strength
Show all 29
ISO 2759Board - Determination of bursting strength
ISO 3035Corrugated fibreboard - Determination of flat crush resistance
ISO 3036Board - Determination of puncture resistance using a pendulum device
ISO 3037Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method)
ISO 3039Corrugated fibreboard - Determination of grammage of the component papers after separation
ISO 5631-1Paper and board - Determination of colour by diffuse reflectance - Part 1: Indoor daylight conditions (C/2°)
ISO 5631-2Paper and board - Determination of colour by diffuse reflectance - Part 2: Outdoor daylight conditions (D65/10°)
ISO 6588-1Paper, board and pulps - Determination of pH of aqueous extracts - Part 1: Cold extraction
ISO 6588-2Paper, board and pulps - Determination of pH of aqueous extracts - Part 2: Hot extraction
ISO 7263-1Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1: A-flute
ISO 10716Paper and board - Determination of alkali reserve
ISO 11475Paper and board - Determination of CIE whiteness, D65/10 degrees (outdoor daylight)Exclusion

Limits written next to it

ISO 11475:2017 - escluso/except par.

Exclusion. Written next to it on line 2 of ACCREDIA certificate 00074.

ISO 12048Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester
ISO 15318Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB)
ISO 15320Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract
ISO 15360-2Recycled pulps - Estimation of Stickies and Plastics - Part 2: Image analysis method
ISO 16260Paper and board - Determination of internal bond strength
EN8
EN 645
EN 646
EN 647
EN 648
EN 1186-3Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants
EN 1541
EN 14719
EN 22248
ISO 12625 series6
ISO 12625-3Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
ISO 12625-4Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
ISO 12625-5Tissue paper and tissue products - Part 5: Determination of wet tensile strength
ISO 12625-7Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight)
ISO 12625-8Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
ISO 12625-15Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant
Other standards1
DIN 54603

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

4 lines
ACCREDIA

ISO/IEC 17025

Active

00074

View scope

Accredited scope, certificate 00074

LineMethodMatrixRange
1UNI CEI EN ISO/IEC 17025:2018; UNI 10328-7:1994; UNI EN ISO 7263-1:2019; UNI CEN/TS 17497:2020; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 3c + 3d; UNI EN 647:1994 + DIN 54603:2008; UNI EN 645:1994 + DIN 54603:2008; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 4 (2 + 3); UNI EN 647:1994 + UNI EN 1541:2002; UNI EN 645:1994 + UNI EN 1541:2002; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 2 Met 1; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 5.3 + DM 18/06/1979 GU 180 03/07/1979; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 5.2 + DM 18/06/1979 GU 180 03/07/1979; UNI EN 647:1994 + UNI EN ISO 15320:2011; UNI EN 645:1994 + UNI EN ISO 15320:2011; UNI EN 646:2019; UNI EN 648:2019; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 3e; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 3a; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 3cAnime in carta e cartone/Paper and board cores; Carta da ondulare/Corrugating medium; Carta e cartone destinati a venire in contatto con gli alimenti/Paper and board intended to come into contact with foodstuffs0 to 200 kN/m
2UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 12625-7:2021; UNI EN ISO 12625-15:2022; UNI EN ISO 12625-5:2024; UNI EN ISO 12625-4:2022; UNI EN ISO 12625-3:2014; UNI EN ISO 12625-8:2011; UNI EN ISO 1974:2012; UNI EN ISO 2758:2014/EC1:2017; UNI 11743:2019; UNI EN ISO 535:2023; UNI EN ISO 536:2020; UNI EN ISO 534:2012; ISO 11475:2017; ISO 5631-2:2022; ISO 5631-1:2022; UNI ISO 2471:2009; UNI EN ISO 15318:2001Carta/Paper; Cartone/Board0 to 16000 mN
3UNI ISO 16260:2018; ISO 10716:2022; UNI EN ISO 287:2018; UNI EN 14719:2005; UNI ISO 2470-2:2010; UNI ISO 2470-1:2016/EC1:2017; UNI 11743:2019 + UNI ISO 15360-2:2018; UNI ISO 6588-2:2024; UNI ISO 6588-1:2024; UNI ISO 1762:2019; UNI ISO 3039:2017; UNI EN ISO 3035:2012; UNI EN ISO 3037:2023; UNI 8442:1983; ISO 3036:2025; ISO 2759:2014; UNI 8440:2010; DM 28/10/1977 GU n 312 16/11/1977 art. 6; UNI EN ISO 2234:2002; UNI EN ISO 12048:2001; UNI EN 22248:1993Carta/Paper; Cartone/Board; Paste/Pulps; Cartone ondulato/Corrugated fibreboard; Cartone/Board; Prodotti cartotecnici/Paper converting products; Imballaggi di cartone ondulato per esportazione di prodotti ortofrutticoli/Corrugated fibreboard packaging for vegetable; Imballaggi di trasporto completi e pieni/Complete, filled transport packages; Imballaggi in cartone ondulato/Corrugated fibreboard packaging-
4Reg UE 10/2011 14/01/2011 GU UE L12 15/01/2011 Reg UE 2016/1416 24/08/2016 GU UE L230/22 25/08/2016 Reg UE 2020/1245 02/09/2020 GU UE L288 03/09/2020; EN 1186-3:2022; UNI EN 1186-3:2022; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 1 DM 26/04/1993 GU n° 162 13/07/1993 All III DM 22/07/1998 GU 228 30/09/1998; UNI ISO 302:2015Plastics and plastic materials coupled with paper; Paste/Pulps1 to 100 mg/dm2

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Traversa prima di Via della Chiesa di Sorbano del Giudice n.231, Lucca, 55100, IT

44.01776, 10.45443

Open in Maps
← All accredited testing labs in Italy

Accreditation data refreshed from the ACCREDIA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.