Registers refreshed 2026-11-08.See refresh dates
Germany

IGUTEC Ingenieurgemeinschaft für Umwelttechnologien

Keplerring 13, 84030, Ergolding, Germany

DAKKS D-PL-18561-01-00ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
3
DAKKS certificate
1
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 3 standard numbers and the 2 official names we hold. When no standard matches, it searches the method text of every scope line.

EN 16000-32
ISO 16000-7Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
ISO 16000-27Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

5 lines
DAKKS

ISO/IEC 17025

Active

D-PL-18561-01-00

View scope

Accredited scope, certificate D-PL-18561-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018Air-
2DIN EN ISO 16000-7; ISO 16000-7; ISO 16000-27 2014-11 Innenraumluftverunreinigungen - Teil 27; VDI 3877 Blatt 2; VDI 3492 2013-06 Messen von Innenraumluftverunreinigungen - Messen von Immissionen - Messen anorganischer faserförmiger Partikel - Rasterelektronenmikroskopisches Verfahren VDI 3861 Blatt 2 Entwurf 2022-02Air-
3DIN EN 16000-32; VDI 3877 Blatt 1 2011-09; VDI/GVSS 6202 Blatt 1; EN 16000-32; en 3Oberflächen abgelagerte Faserstäube; Pulvern; Pudern; Stäuben; Baustoffen; Materialien und Baustoffen; Baumaterialien; Aerosole; Faserstäuben; A-Staub Alveolengängiger Staubanteil; E-Staub Einatembarer Staubanteil; Holzstaub-
4IFA 7808; IFA 6665; DGUV 213-505; IFA 7710; IFA 8522; DGUV 213-546; IFA 7485; Messverfahren Nr. 2Metal-
5-Air
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

Anlage zur Akkreditierungsurkunde D-PL-18561-01-00 Gültig ab: 08.02.2023 Ausstellungsdatum: 08.02.2023 Seite 5 von 5 Die unter Punkt 4 aufgeführten Verfahren entsprechen den Anforderungen, die bei der Ermittlung der Konzentration gefährlicher Stoffe an Arbeitsplätzen gelten. Zusammen mit der Prüfung der in ausreichender Anzahl für die einzelnen Gruppen vorgelegten Berichte, wird für die Gruppe 1 Gruppe 2 die Kompetenz für die Ermittlung und Beurteilung der Konzentrationen gefährlicher Stoffe in der Luft in Arbeitsbereichen gemäß Gefahrstoffverordnung § 7, Abs. 10 bestätigt. Verwendete Abkürzungen: AA_7.x-yz Arbeitsanweisung (Hausverfahren der IGUTEC Ingenieurgemeinschaft für Umwelttechnologien GmbH) BIA Berufsgenossenschaftliches Institut für Arbeitssicherheit DGUV Deutsche Gesetzliche Unfallversicherung DIN Deutsches Institut für Normung e. V. EDXA energiedispersive Röntgenmikroanalyse EN Europäische Norm GVSS Gesamtverband Schadstoffsanierung e. V. IEC International Electronical Commission IFA Institut für Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung ISO International Organization for Standardization REM Rasterelektronenmikroskop VDI Verein Deutscher Ingenieure KMF Künstliche Mineralfasern TRGS Technische Regeln für Gefahrstoffe
-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Keplerring 13, Ergolding, 84030, DE

48.56702, 12.15279

Open in Maps

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.