Advanced Composites Mexicana
Ave. Japon 306 Parque Industrial San Francisco, San Francisco de Los Romo, 20355, Mexico, San Francisco de Los Romo, Mexico
Visit website- Accredited standards
- 17
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 17 standard numbers and the 14 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO11
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 178Plastics - Determination of flexural properties
ISO 179-2Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test
ISO 180Plastics - Determination of Izod impact strength
ISO 291Plastics - Standard atmospheres for conditioning and testing
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ASTM6
ASTM D638Standard Test Method for Tensile Properties of Plastics
ASTM D648
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D1238
ASTM D5630
ISO 1133-1; ASTM D1238; ISO 3451-1; ASTM D5630; ISO 1183-1; ASTM D792; ISO 527-1; ISO 527-2; ASTM D638; ISO 178; ASTM D790; ISO 180; ASTM 256; ISO 179-2; ISO 75-1; ISO 75-2; ASTM D648; ISO 291; ASTM 618
Read from the A2LA scope document we downloaded on 2026-08-05. Register refreshed 2026-10-23.
Scope as published by A2LA
2 lines
ISO/IEC 17025
Active7532.01
The scope document we hold says it is valid until 2027-12-31.
Accredited scope, certificate 7532.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO 1133-1; ASTM D1238; ISO 3451-1; ASTM D5630; ISO 1183-1; ASTM D792; ISO 527-1; ISO 527-2; ASTM D638; ISO 178; ASTM D790; ISO 180; ASTM 256; ISO 179-2; ISO 75-1; ISO 75-2; ASTM D648; ISO 291; ASTM 618 | plastics | - |
| 2 | ISO/IEC 17025:2017 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Ave. Japon 306 Parque Industrial San Francisco, San Francisco de Los Romo, 20355, Mexico, San Francisco de Los Romo, MX
22.02195, -102.25178
Open in MapsAccreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.