Registers refreshed 2026-11-08.See refresh dates
Poland

Politechnika Wrocławska

ul. Wybrzeże St. Wyspiańskiego 41, 50-370, Wrocław, Poland

PCA AB 167PCA AB 361PCA AB 659and 4 moreISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
98
PCA certificates
7
Site in our directory
1
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 98 standard numbers and the 62 official names we hold. When no standard matches, it searches the method text of every scope line.

IEC 61000 series26
IEC 61000-3-2Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-3-3Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 61000-3-11Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection
IEC 61000-3-12Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase

Certificate says EN 61000-3-12. Probably the same standard; not checked against the EN document.

IEC 61000-4-2Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

Certificate says EN 61000-4-3. Probably the same standard; not checked against the EN document.

IEC 61000-4-4Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 61000-4-5Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
IEC 61000-4-6Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-8Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-9Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test
IEC 61000-4-10
Show all 26
IEC 61000-4-11Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
IEC 61000-4-12Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test
IEC 61000-4-13Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61000-4-14
IEC 61000-4-16
IEC 61000-4-17
IEC 61000-4-18
IEC 61000-4-19
IEC 61000-4-20
IEC 61000-4-21
IEC 61000-4-28
IEC 61000-4-29Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 61000-4-34
IEC 61000-4-39Electromagnetic compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test
ISO25
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 140-4Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms
ISO 140-7Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors
ISO 252Conveyor belts - Adhesion between constitutive elements - Test methods
ISO 283Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
ISO 284Conveyor belts - Electrical conductivity - Specification and test method
ISO 340Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
ISO 717-1Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation
ISO 717-2Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation
ISO 3382-1Acoustics - Measurement of room acoustic parameters - Part 1: Performance spaces
ISO 3382-2Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms
ISO 3449Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements
Show all 25
ISO 3471Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements
ISO 3744Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
ISO 3746Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
ISO 4649Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO 7623Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment
ISO 8094Steel cord conveyor belts - Adhesion strength test of the cover to the core layer
ISO 9613-2Acoustics - Attenuation of sound during propagation outdoors - Part 2: Engineering method for the prediction of sound pressure levels outdoors
ISO 10694Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
ISO 11261Soil quality - Determination of total nitrogen - Modified Kjeldahl method
ISO 13878Soil quality - Determination of total nitrogen content by dry combustion ("elemental analysis")
ISO 16283-1Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation
ISO 16283-2Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation
ISO 20238Conveyor belts - Drum friction testing
EN12
EN 933-1Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 1097-2Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 1097-6Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1367-1
EN 1426Bitumens and bituminous binders - Determination of needle penetration
EN 13036-7
EN 13286-41
EN 13342Characterisation of sludges - Determination of Kjeldahl nitrogen
EN 13654-1
EN 13654-2
EN 15475
EN 15476
ETSI8
ETSI EN 300 220-1
ETSI EN 300 220-2
ETSI EN 300 328Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum
ETSI EN 300 440-1
ETSI EN 301 511Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
ETSI EN 301 908-1
ETSI EN 301 908-13
ETSI TS 151 010-1
CISPR5
CISPR 11Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

Certificate says EN 55011. Probably the same standard; not checked against the EN document.

CISPR 14-1Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

Certificate says EN 55014-1, IEC 55014-1. Probably the same standard; not checked against the EN document.

CISPR 15Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

Certificate says EN 55015. Probably the same standard; not checked against the EN document.

CISPR 22Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

Certificate says EN 55022. Probably the same standard; not checked against the EN document.

CISPR 32Electromagnetic compatibility of multimedia equipment - Emission requirements

Certificate says EN 55032. Probably the same standard; not checked against the EN document.

EN 12697 series5
EN 12697-1Bituminous mixtures - Test methods - Part 1: Soluble binder content
EN 12697-6Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
EN 12697-22
EN 12697-24
EN 12697-26
IEC4
IEC 60268-16
IEC 60945Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
IEC 62233Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
IEC 62311Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz)

Certificate says EN 62311. Probably the same standard; not checked against the EN document.

CISPR 16 series3
CISPR 16-2-1Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

Certificate says EN 55016-2-1. Probably the same standard; not checked against the EN document.

CISPR 16-2-2Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

Certificate says EN 55016-2-2. Probably the same standard; not checked against the EN document.

CISPR 16-2-3Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

Certificate says EN 55016-2-3. Probably the same standard; not checked against the EN document.

EN 12390 series3
EN 12390-3Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-5
EN 12390-6
Other standards7
PN-88/B-06250
PN-B-06265
PN-C-94147
PN-G-59001
PN-S-02205
PN-S-96012
PN-T-06580-3

Read from the PCA scope documents we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

49 lines
PCA

ISO/IEC 17025

Active

AB 167

The scope document we hold says it is valid until 2029-07-17.

View on PCA
PCA

ISO/IEC 17025

Active

AB 361

The scope document we hold says it is valid until 2029-09-20.

View on PCA
PCA

ISO/IEC 17025

Active

AB 659

The scope document we hold says it is valid until 2029-11-08.

View on PCA
PCA

ISO/IEC 17025

Active

AB 696

The scope document we hold says it is valid until 2030-03-27.

View on PCA
PCA

ISO/IEC 17025

Active

AB 710

The scope document we hold says it was valid until 2026-05-16. That date has passed, so our copy may be out of date. We downloaded it from the PCA register on 2026-03-13. Check the PCA register for the current scope.

View on PCA
PCA

ISO/IEC 17025

Active

AB 796

The scope document we hold says it is valid until 2027-05-28.

View on PCA
PCA

ISO/IEC 17025

Active

AB 1211

The scope document we hold says it was valid until 2026-08-02. That date has passed, so our copy may be out of date. We downloaded it from the PCA register on 2026-03-13. Check the PCA register for the current scope.

View on PCA

Location

ul. Wybrzeże St. Wyspiańskiego 41, Wrocław, 50-370, PL

51.12631, 16.97820

Open in Maps
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.