Registers refreshed 2026-11-08.See refresh dates
Germany

Ingenieurbüro g o e b e l Gesellschaft mit beschränkter Haftung

Butzbacher Weg 6, 64289, Darmstadt, Germany

DAKKS D-PL-12023-01-00DAKKS D-PL-12023-01-01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
10
DAKKS certificates
2
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 10 standard numbers and the 2 official names we hold. When no standard matches, it searches the method text of every scope line.

DIN 56912
EN 12198-1
EN 12198-2
EN 12198-3
IEC 60825-1
IEC 60825-2
IEC 60825-4
IEC 62471-5
ISO 11553-1Safety of machinery - Laser processing machines - Part 1: Laser safety requirements
ISO 11553-2Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held or hand-operated laser processing machines

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

6 lines
DAKKS

ISO/IEC 17025

Active

D-PL-12023-01-00

View scope

Accredited scope, certificate D-PL-12023-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018; DIN EN ISO/IEC 17011; DIN EN ISO 9001--
2DIN EN ISO/IEC 17000--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-12023-01-01

View scope

Accredited scope, certificate D-PL-12023-01-01

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018; DIN EN ISO 9001--
2DIN EN ISO 11553 -1: 2021-01 Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 1; DIN EN ISO 11553 -2: 2009-03 Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 2; DIN EN 12198 -1: 2008-11 Sicherheit von Maschinen - Bewertung und Verminderung des Risikos der von Maschinen emittierten Strahlung - Teil 1; DIN EN 12198 -2: 2008-11 Sicherheit von Maschinen - Bewertung und Verminderung des Risikos der von Maschinen emittierten Strahlung - Teil 2; DIN 56912--
3DIN EN 12198 -3: 2008-11 Sicherheit von Masch inen - Bewertung und Verminderung des Risikos der von Maschinen emittierten Strahlung - Teil 3; DIN EN 60825 -1: 2022-07 VDE 0837-1:2022-07 Sicherheit von Lasereinrichtungen - Teil 1; DIN EN 60825 -1: 2015-07 VDE 0837-1:2015-07 Sicherheit von Lasereinrichtungen Teil 1; DIN EN 60825 -4: 2011-12 VDE 0837-4:2011-12 Sicherheit von Lasereinrichtungen - Teil 4; DIN EN 60825 -2: 2011-06 VDE 0837-2:2011-06 Sicherheit von Lasereinrichtungen - Teil 2--
4DIN EN 62471:2009 -03 VDE 0837-471: 2009-03; DIN EN 62471 -5: 2017-02 VDE 0837-471-5: 2017-02 Photobiologische Sicherheit von Lampen und Lampensystemen Teil 5; VDE 0837-471; VDE 0837-471-5; EN 62471Lampen und Lampensystemen; Lampensystemen für Bildprojektoren-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Butzbacher Weg 6, Darmstadt, 64289, DE

49.88769, 8.65439

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.