Registers refreshed 2026-11-08.See refresh dates
Finland

Water and Environment Research of South-West Finland,

Finland

FINAS T101ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
35
FINAS certificate
1
Sites in our directory
2
FINAS accredited scope

What this lab is accredited for

Our reading of the FINAS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 35 standard numbers and the 33 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO28
ISO 3884Solid recovered fuels - Methods for the determination of the content of elements (Al, Ca, Fe, K, Mg, Na, P, S, Si, Ti, As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Sn, Tl, V, Zn)
ISO 5815-1Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition
ISO 6222Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium
ISO 7027-1Water quality - Determination of turbidity - Part 1: Quantitative methods
ISO 7393-2Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes
ISO 7887Water quality - Examination and determination of colour
ISO 7899-2Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method
ISO 9308-2Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 2: Most probable number method
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 11465Sludge and solid environmental matrices - Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis
ISO 11885Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 11905-1Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate
Show all 28
ISO 13164-4Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation counting
ISO 13395Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
ISO 14189Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration
ISO 15587-2Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion
ISO 15705Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
ISO 16266Water quality - Detection and enumeration of Pseudomonas aeruginosa - Method by membrane filtration
ISO 16266-2Water quality - Detection and enumeration of Pseudomonas aeruginosa - Part 2: Most probable number method
ISO 16967Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
ISO 16968Solid biofuels - Determination of minor elements
ISO 17294-1Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements
ISO 17294-2Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
ISO 17852Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
ISO 18134-3Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample
ISO 20236Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion
ISO 21660-3Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
ISO 29441Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
EN7
EN 872Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
EN 1484Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
EN 1899-2Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples
EN 15681-2
EN 16173
EN 25813Water quality - Determination of dissolved oxygen - Iodometric method
EN 27888Water quality - Determination of electrical conductivity

Read from the FINAS scope document we downloaded on 2026-08-05. Register refreshed 2026-11-06.

Scope as published by FINAS

20 lines
FINAS

ISO/IEC 17025

Active

T101

The scope document we hold says it is valid until 2029-05-29.

View scope

Other Locations

1 other site in this organization

Accreditation data refreshed from the FINAS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the FINAS entry linked above.