Registers refreshed 2026-11-08.See refresh dates
Poland

Centralny Instytut Ochrony Pracy - Państwowy Instytut Badawczy

ul. Czerniakowska 16, 00-701, Warszawa, Poland

PCA AB 038ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
162
PCA certificate
1
Site in our directory
1
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 162 standard numbers and the 69 official names we hold. When no standard matches, it searches the method text of every scope line.

EN74
EN 131-1
EN 131-2
EN 136
EN 137
EN 138
EN 140
EN 142
EN 143
EN 145
EN 149
EN 166
EN 167
Show all 74
EN 168
EN 175
EN 269
EN 342
EN 348
EN 353-1
EN 353-2
EN 354
EN 355
EN 358
EN 360
EN 361
EN 362
EN 364
EN 388
EN 397
EN 402
EN 403
EN 404
EN 405
EN 407
EN 420
EN 443
EN 511
EN 530
EN 659
EN 812
EN 813
EN 863
EN 943-1
EN 1077
EN 1078
EN 1080
EN 1082-2
EN 1082-3
EN 1146
EN 1731
EN 1827
EN 1876-1
EN 12083
EN 12127
EN 12275
EN 12477
EN 12492
EN 12568
EN 12941
EN 12942
EN 13794
EN 13819-1
EN 13819-2
EN 14253Mechanical vibration - Measurement and evaluation of occupational exposure to whole-body vibration with reference to health - Practical guidance

Certificate says EN 14253+A1:2011. Probably the same standard; not checked against the EN document.

EN 14255-1
EN 14255-2
EN 14325
EN 14387
EN 14435
EN 14593-1
EN 14593-2
EN 14594
EN 15090
EN 16523-1
EN 17353
ISO52
ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 374-2Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration
ISO 374-4Protective gloves against dangerous chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals
ISO 811Textiles - Determination of resistance to water penetration - Hydrostatic pressure test
ISO 1421Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
ISO 2023Rubber footwear - Lined industrial vulcanized-rubber boots - Specification
ISO 2286-2Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 3071Textiles - Determination of pH of aqueous extract
ISO 3376Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation
ISO 3759Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
ISO 4044Leather - Chemical tests - Preparation of chemical test samples
Show all 52
ISO 4045Leather - Chemical tests - Determination of pH and difference figure
ISO 4649Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO 4674-1Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods
ISO 4869-1Acoustics - Hearing protectors - Part 1: Subjective method for the measurement of sound attenuation
ISO 5077Textiles - Determination of dimensional change in washing and drying
ISO 5084Textiles - Determination of thickness of textiles and textile products
ISO 5349-1Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements
ISO 5349-2Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace
ISO 6330Textiles - Domestic washing and drying procedures for textile testing
ISO 6529Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases
ISO 6530Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids
ISO 6942Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
ISO 7854Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing
ISO 9150Protective clothing - Determination of behaviour of materials on impact of small splashes of molten metal
ISO 9151Protective clothing against heat and flame - Determination of heat transmission on exposure to flame
ISO 9185Protective clothing - Assessment of resistance of materials to molten metal splash
ISO 9237Textiles - Determination of the permeability of fabrics to air
ISO 9612Acoustics - Determination of occupational noise exposure - Methodology
ISO 9920Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble
ISO 10819Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
ISO 11092Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
ISO 11554Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam radiant power, radiant energy and temporal characteristics
ISO 12127-1Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 1: Contact heat produced by heating cylinder
ISO 12870Ophthalmic optics - Spectacle frames - Requirements and test methods
ISO 12947-2Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
ISO 13287Personal protective equipment - Footwear - Test method for slip resistance
ISO 13934-1Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13935-2Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method
ISO 13982-2Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
ISO 13997Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects
ISO 14889Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses
ISO 15025Protective clothing - Protection against flame - Method of test for limited flame spread
ISO 15831Clothing - Physiological effects - Measurement of thermal insulation by means of a thermal manikin
ISO 17075-1Leather - Chemical determination of chromium(VI) content in leather - Part 1: Colorimetric method
ISO 17491-3Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
ISO 17491-4Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
ISO 17493Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven
ISO 20344Personal protective equipment - Test methods for footwear
ISO 20471High visibility clothing - Test methods and requirements
ISO 21420Protective gloves - General requirements and test methods
EN 13274 series8
EN 13274-1
EN 13274-2
EN 13274-3
EN 13274-4
EN 13274-5
EN 13274-6
EN 13274-7
EN 13274-8
EN 13087 series6
EN 13087-2
EN 13087-3
EN 13087-4
EN 13087-5
EN 13087-6
EN 13087-8
EN 1149 series3
EN 1149-1
EN 1149-2
EN 1149-3
ISO 13937 series3
ISO 13937-2Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
ISO 13937-3Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
ISO 13937-4Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)
ISO 18526 series3
ISO 18526-1Eye and face protection - Test methods - Part 1: Geometrical optical properties
ISO 18526-2Eye and face protection - Test methods - Part 2: Physical optical properties
ISO 18526-3Eye and face protection - Test methods - Part 3: Physical and mechanical properties
ISO 22568 series3
ISO 22568-1Foot and leg protectors - Requirements and test methods for footwear components - Part 1: Metallic toecaps
ISO 22568-2Foot and leg protectors - Requirements and test methods for footwear components - Part 2: Non-metallic toecaps
ISO 22568-3Foot and leg protectors - Requirements and test methods for footwear components - Part 3: Metallic perforation resistant inserts
ISO 8980 series3
ISO 8980-1Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses
ISO 8980-3Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods
ISO 8980-4Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the properties of anti-reflective coatings and hydrophobic coatings
ISO 9073 series3
ISO 9073-1Nonwovens - Test methods - Part 1: Determination of mass per unit area
ISO 9073-3Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method
ISO 9073-4Nonwovens - Test methods - Part 4: Determination of tear resistance by the trapezoid procedure
Other standards4
IEC 60825-1
PN-N-01307:1994Hałas - Dopuszczalne wartości hałasu w środowisku pracy - Wymagania dotyczące wykonywania pomiarów
PN-P-04613
PN-Z-01339

Read from the PCA scope document we downloaded on 2026-02-11. Register refreshed 2026-11-06.

Scope as published by PCA

47 lines
PCA

ISO/IEC 17025

Active

AB 038

The scope document we hold says it was valid until 2026-09-17. That date has passed, so our copy may be out of date. We downloaded it from the PCA register on 2026-02-11. Check the PCA register for the current scope.

View on PCA

Location

ul. Czerniakowska 16, Warszawa, 00-701, PL

52.23337, 21.07115

Open in Maps
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.