Materiaal Metingen Testgroep
Rietdekkerstraat 16, 2984 BM, RIDDERKERK, Netherlands
Visit website- Accredited standards
- 33
- RvA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the RvA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 33 standard numbers and the 30 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO22
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 642Steel - Hardenability test by end quenching (Jominy test)
ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 898-2Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes
ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6506-4Metallic materials - Brinell hardness test - Part 4: Table of hardness values
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6507-4Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
Show all 22
ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
ISO 7438Metallic materials - Bend test
ISO 8249Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
ISO 8491Metallic materials - Tube (in full section) - Bend test
ISO 8492Metallic materials - Tube - Flattening test
ISO 8493Metallic materials - Tube - Drift-expanding test
ISO 8494Metallic materials - Tube - Flanging test
ISO 8495Metallic materials - Tube - Ring-expanding test
ISO 8496Metallic materials - Tube - Ring tensile test
ISO 9017Destructive tests on welds in metallic materials - Fracture test
ASTM11
ASTM A255
ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A380
ASTM A730
ASTM A923Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E384Standard Test Method for Microindentation Hardness of Materials
ASTM E562Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM G48Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM A730; NEN-EN-ISO 6892-1; NEN-EN-ISO 6892-1 and ASTM A370; NEN-EN-ISO 6892-2 and ASTM E21; NEN-EN-ISO 898-1 and NEN-EN-ISO 898-2; NEN-EN-ISO 148-1; ASTM E23 and ASTM A370; ISO 6506-1 and ISO 6506-4; ISO 6507-1 and ISO 6507-4; ISO 6508-1; ISO 6507-1, ISO 6507-4 and ASTM E384
NEN-EN-ISO 5173; NEN-EN-ISO 7438; ISO 8491; ISO 9017; AWS; ASME IX; NEN-EN-ISO 8492; A370; NEN-EN-ISO 8493; NEN-EN-ISO 8494; NEN-EN-ISO 8495; NEN-EN-ISO 8496; ISO 642; ASTM A255
ASTM A262; DIN-EN- ISO 3651-2; ASTM G48; ASTM A923; ASTM A380; ASTM E562; EN ISO/IEC 17025:2017
NEN-EN-ISO 8249
Read from the RvA scope document we downloaded on 2026-02-12. Register refreshed 2026-10-25.
Scope as published by RvA
5 lines
ISO/IEC 17025
ActiveL208
The scope document we hold says it is valid until 2028-04-01.
Accredited scope, certificate L208
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | EN ISO/IEC 17025:2017 | - | - |
| 2 | ASTM A730; NEN-EN-ISO 6892-1; NEN-EN-ISO 6892-1 and ASTM A370; NEN-EN-ISO 6892-2 and ASTM E21; NEN-EN-ISO 898-1 and NEN-EN-ISO 898-2; NEN-EN-ISO 148-1; ASTM E23 and ASTM A370; ISO 6506-1 and ISO 6506-4; ISO 6507-1 and ISO 6507-4; ISO 6508-1; ISO 6507-1, ISO 6507-4 and ASTM E384 | Metal | to 1000 kN |
| 3 | NEN-EN-ISO 5173; NEN-EN-ISO 7438; ISO 8491; ISO 9017; AWS; ASME IX; NEN-EN-ISO 8492; A370; NEN-EN-ISO 8493; NEN-EN-ISO 8494; NEN-EN-ISO 8495; NEN-EN-ISO 8496; ISO 642; ASTM A255 | Metal | to 1000 kN |
| 4 | ASTM A262; DIN-EN- ISO 3651-2; ASTM G48; ASTM A923; ASTM A380; ASTM E562; EN ISO/IEC 17025:2017 | Metal | to 1000 ˚C |
| 5 | NEN-EN-ISO 8249 | ferrite (delta-ferrite) | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in Netherlands
Accreditation data refreshed from the RvA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the RvA entry linked above.