Germany

Siebert und Knipschild GmbH Ingenieurbüro für Kunststofftechnik

Bergstücken 25, 22113, Oststeinbek, Germany

DAKKS|D-PL-11222-01-02DAKKS|D-PL-11222-01-00DAKKS|D-PL-11222-01-01ISO/IEC 17025Register refreshed 2026-09-25

Certificates

Scope items

Standards

Locations

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Contact this laboratory

Visit website Open DAKKS register entry

Work at Siebert und Knipschild GmbH Ingenieurbüro für Kunststofftechnik?

Claim this profile to keep it accurate.

Register record

DAKKSRefreshed 2026-09-25: D-PL-11222-01-02Active; D-PL-11222-01-00Active; D-PL-11222-01-01Active

Accredited standards

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

ISO

ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

ISO 62Plastics - Determination of water absorption

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-01)

ASTM D5813; ASTM D790; DIN EN ISO 179-1; ISO 8521; DIN EN 1447; DIN EN ISO 604; ASTM D695; ISO 2577; DIN EN ISO 75-2; DIN EN ISO 11501; DIN 53752

ISO 175Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals

As written on the certificate · Line 10 (DAKKS D-PL-11222-01-01)

ISO 4901; DIN 53394-2; DIN EN ISO 2114; ISO 5661; ISO 10952; DIN EN 1120; ASTM D3681; DIN EN ISO 175

ISO 178Plastics - Determination of flexural properties

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-01)

ASTM D5813; ASTM D790; DIN EN ISO 179-1; ISO 8521; DIN EN 1447; DIN EN ISO 604; ASTM D695; ISO 2577; DIN EN ISO 75-2; DIN EN ISO 11501; DIN 53752

ISO 584Plastics - Unsaturated polyester resins - Determination of reactivity at 80 degrees C (conventional method)

As written on the certificate · Line 11 (DAKKS D-PL-11222-01-01)

ASTM D543; DIN 50018; DIN EN ISO 584

ISO 604Plastics - Determination of compressive properties

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-01)

ASTM D5813; ASTM D790; DIN EN ISO 179-1; ISO 8521; DIN EN 1447; DIN EN ISO 604; ASTM D695; ISO 2577; DIN EN ISO 75-2; DIN EN ISO 11501; DIN 53752

ISO 815-1Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

As written on the certificate · Line 7 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1172; ISO 10466; DIN EN 59; DIN EN ISO 868; ASTM D2240; ASTM D2583a; DIN 53370; ASTM F 1306

ISO 899-1Plastics - Determination of creep behaviour - Part 1: Tensile creep

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

ISO 899-2Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

As written on the certificate · Line 3 (DAKKS D-PL-11222-01-02)

DIN EN ISO 1133 -1; DIN EN ISO 1183 -1; DIN EN ISO 9863 -1; DIN EN ISO 9864; DIN EN ISO 12236; DIN EN 29073 -3; BAM Methode B14

ISO 1133-2Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture

As written on the certificate · Line 8 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1133 -2; ISO 2431; DIN EN ISO 2555; DIN EN ISO 3219; DIN 53019 -1; ISO 5834 -4; ASTM D 5576; ISO 6721 -4

ISO 1172Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods

As written on the certificate · Line 7 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1172; ISO 10466; DIN EN 59; DIN EN ISO 868; ASTM D2240; ASTM D2583a; DIN 53370; ASTM F 1306

ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method

As written on the certificate · Line 3 (DAKKS D-PL-11222-01-02)

DIN EN ISO 1133 -1; DIN EN ISO 1183 -1; DIN EN ISO 9863 -1; DIN EN ISO 9864; DIN EN ISO 12236; DIN EN 29073 -3; BAM Methode B14

ISO 2114Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value

As written on the certificate · Line 10 (DAKKS D-PL-11222-01-01)

ISO 4901; DIN 53394-2; DIN EN ISO 2114; ISO 5661; ISO 10952; DIN EN 1120; ASTM D3681; DIN EN ISO 175

ISO 2431Paints and varnishes - Determination of flow time by use of flow cups

As written on the certificate · Line 8 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1133 -2; ISO 2431; DIN EN ISO 2555; DIN EN ISO 3219; DIN 53019 -1; ISO 5834 -4; ASTM D 5576; ISO 6721 -4

ISO 2555Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method

As written on the certificate · Line 8 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1133 -2; ISO 2431; DIN EN ISO 2555; DIN EN ISO 3219; DIN 53019 -1; ISO 5834 -4; ASTM D 5576; ISO 6721 -4

ISO 2577Plastics - Thermosetting moulding materials - Determination of shrinkage

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-01)

ASTM D5813; ASTM D790; DIN EN ISO 179-1; ISO 8521; DIN EN 1447; DIN EN ISO 604; ASTM D695; ISO 2577; DIN EN ISO 75-2; DIN EN ISO 11501; DIN 53752

ISO 2811-1Paints and varnishes - Determination of density - Part 1: Pycnometer method

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-02)

DIN 19523; DIN 19565 -1; DIN 53377; DIN 53769 -3; DVS 2203 -1; DVS 2225 -4; DIN EN ISO 2811 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -3; DIN EN ISO 9514; DIN EN 295 -3

ISO 3219Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate

As written on the certificate · Line 8 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1133 -2; ISO 2431; DIN EN ISO 2555; DIN EN ISO 3219; DIN 53019 -1; ISO 5834 -4; ASTM D 5576; ISO 6721 -4

ISO 4624Paints and varnishes - Pull-off test for adhesion

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-02)

DIN EN ISO 4624; DIN EN ISO 6272 -1; DIN EN ISO 11296 -1; DIN EN ISO 11296 -4; DIN EN 1107 -2; DIN EN 13566 -4; DIN EN 14364; E DIN EN 495 -1; DIN CEN/TR 15729; DIN SPEC 1188; DIN 16868 -2; DIN 16869 -2

ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-02)

DIN 19523; DIN 19565 -1; DIN 53377; DIN 53769 -3; DVS 2203 -1; DVS 2225 -4; DIN EN ISO 2811 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -3; DIN EN ISO 9514; DIN EN 295 -3

ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-02)

DIN 19523; DIN 19565 -1; DIN 53377; DIN 53769 -3; DVS 2203 -1; DVS 2225 -4; DIN EN ISO 2811 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -3; DIN EN ISO 9514; DIN EN 295 -3

ISO 4901Reinforced plastics based on unsaturated-polyester resins - Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography

As written on the certificate · Line 10 (DAKKS D-PL-11222-01-01)

ISO 4901; DIN 53394-2; DIN EN ISO 2114; ISO 5661; ISO 10952; DIN EN 1120; ASTM D3681; DIN EN ISO 175

ISO 5661Petroleum products - Hydrocarbon liquids - Determination of refractive index

As written on the certificate · Line 10 (DAKKS D-PL-11222-01-01)

ISO 4901; DIN 53394-2; DIN EN ISO 2114; ISO 5661; ISO 10952; DIN EN 1120; ASTM D3681; DIN EN ISO 175

ISO 5834-4Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4: Oxidation index measurement method

As written on the certificate · Line 8 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1133 -2; ISO 2431; DIN EN ISO 2555; DIN EN ISO 3219; DIN 53019 -1; ISO 5834 -4; ASTM D 5576; ISO 6721 -4

ISO 6272-1Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-02)

ISO 6721-4Plastics - Determination of dynamic mechanical properties - Part 4: Tensile vibration - Non-resonance method

As written on the certificate · Line 8 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1133 -2; ISO 2431; DIN EN ISO 2555; DIN EN ISO 3219; DIN 53019 -1; ISO 5834 -4; ASTM D 5576; ISO 6721 -4

ISO 6721-5Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method

As written on the certificate · Line 9 (DAKKS D-PL-11222-01-01)

ISO 6721-5; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-4; DIN EN ISO 11357-6; DIN 53765; DVS 2206-1; DVS 2206-4

ISO 7684Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

ISO 7685Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial ring stiffness

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

ISO 8513Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the initial longitudinal tensile strength

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

ISO 8521Glass-reinforced thermosetting plastic (GRP) pipes - Test methods for the determination of the initial circumferential tensile wall strength

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-01)

ASTM D5813; ASTM D790; DIN EN ISO 179-1; ISO 8521; DIN EN 1447; DIN EN ISO 604; ASTM D695; ISO 2577; DIN EN ISO 75-2; DIN EN ISO 11501; DIN 53752

ISO 9514Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-02)

DIN 19523; DIN 19565 -1; DIN 53377; DIN 53769 -3; DVS 2203 -1; DVS 2225 -4; DIN EN ISO 2811 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -3; DIN EN ISO 9514; DIN EN 295 -3

ISO 9863-1Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers

As written on the certificate · Line 3 (DAKKS D-PL-11222-01-02)

DIN EN ISO 1133 -1; DIN EN ISO 1183 -1; DIN EN ISO 9863 -1; DIN EN ISO 9864; DIN EN ISO 12236; DIN EN 29073 -3; BAM Methode B14

ISO 9864Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products

As written on the certificate · Line 3 (DAKKS D-PL-11222-01-02)

DIN EN ISO 1133 -1; DIN EN ISO 1183 -1; DIN EN ISO 9863 -1; DIN EN ISO 9864; DIN EN ISO 12236; DIN EN 29073 -3; BAM Methode B14

ISO 10466Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection

As written on the certificate · Line 7 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1172; ISO 10466; DIN EN 59; DIN EN ISO 868; ASTM D2240; ASTM D2583a; DIN 53370; ASTM F 1306

ISO 10468Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

ISO 10471Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

ISO 10952Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack for the inside of a section in a deflected condition

As written on the certificate · Line 10 (DAKKS D-PL-11222-01-01)

ISO 4901; DIN 53394-2; DIN EN ISO 2114; ISO 5661; ISO 10952; DIN EN 1120; ASTM D3681; DIN EN ISO 175

ISO 11296-1Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-02)

ISO 11296-4Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-02)

ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

ISO 11501Plastics - Film and sheeting - Determination of dimensional change on heating

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-01)

ASTM D5813; ASTM D790; DIN EN ISO 179-1; ISO 8521; DIN EN 1447; DIN EN ISO 604; ASTM D695; ISO 2577; DIN EN ISO 75-2; DIN EN ISO 11501; DIN 53752

ISO 12236Geosynthetics - Static puncture test (CBR test)

As written on the certificate · Line 3 (DAKKS D-PL-11222-01-02)

DIN EN ISO 1133 -1; DIN EN ISO 1183 -1; DIN EN ISO 9863 -1; DIN EN ISO 9864; DIN EN ISO 12236; DIN EN 29073 -3; BAM Methode B14

ISO 14125Fibre-reinforced plastic composites - Determination of flexural properties

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

EN

EN 59Name not checked yet

As written on the certificate · Line 7 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1172; ISO 10466; DIN EN 59; DIN EN ISO 868; ASTM D2240; ASTM D2583a; DIN 53370; ASTM F 1306

EN 124-1Name not checked yet

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-02)

DIN 4102 -1; APS -Prüfrichtlinie; DIN EN 124 -1; DIN EN 124 -5; DIN EN 1433; DIN 19580

EN 124-5Name not checked yet

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-02)

DIN 4102 -1; APS -Prüfrichtlinie; DIN EN 124 -1; DIN EN 124 -5; DIN EN 1433; DIN 19580

EN 295-3Name not checked yet

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-02)

DIN 19523; DIN 19565 -1; DIN 53377; DIN 53769 -3; DVS 2203 -1; DVS 2225 -4; DIN EN ISO 2811 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -3; DIN EN ISO 9514; DIN EN 295 -3

EN 495-1Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-02)

EN 761Name not checked yet

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

EN 858-1Name not checked yet

As written on the certificate · Line 7 (DAKKS D-PL-11222-01-02)

DIN EN 858 -1; EN 1433:2002+A1:2005

EN 1107-2Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-02)

EN 1120Name not checked yet

As written on the certificate · Line 10 (DAKKS D-PL-11222-01-01)

ISO 4901; DIN 53394-2; DIN EN ISO 2114; ISO 5661; ISO 10952; DIN EN 1120; ASTM D3681; DIN EN ISO 175

EN 1228Name not checked yet

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-01)

ISO 7684; DIN EN 761; ISO 10468; ISO 7685; DIN EN 1228; ISO 10471; DIN EN ISO 899 -1; DIN EN ISO 899 -2; DIN EN ISO 815 -1; DIN EN ISO 11358 -1; DIN EN ISO 62

EN 1393Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

EN 1433Name not checked yet

As written on the certificate · Line 6 (DAKKS D-PL-11222-01-02)

DIN 4102 -1; APS -Prüfrichtlinie; DIN EN 124 -1; DIN EN 124 -5; DIN EN 1433; DIN 19580

As written on the certificate · Line 7 (DAKKS D-PL-11222-01-02)

DIN EN 858 -1; EN 1433:2002+A1:2005

EN 1447Name not checked yet

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-01)

ASTM D5813; ASTM D790; DIN EN ISO 179-1; ISO 8521; DIN EN 1447; DIN EN ISO 604; ASTM D695; ISO 2577; DIN EN ISO 75-2; DIN EN ISO 11501; DIN 53752

EN 13566-4Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-02)

EN 14130Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

EN 14364Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-02)

EN 29073-3Name not checked yet

As written on the certificate · Line 3 (DAKKS D-PL-11222-01-02)

DIN EN ISO 1133 -1; DIN EN ISO 1183 -1; DIN EN ISO 9863 -1; DIN EN ISO 9864; DIN EN ISO 12236; DIN EN 29073 -3; BAM Methode B14

ASTM

ASTM D543Name not checked yet

As written on the certificate · Line 11 (DAKKS D-PL-11222-01-01)

ASTM D543; DIN 50018; DIN EN ISO 584

ASTM D638Standard Test Method for Tensile Properties of Plastics

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

ASTM D695Name not checked yet

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-01)

ASTM D5813; ASTM D790; DIN EN ISO 179-1; ISO 8521; DIN EN 1447; DIN EN ISO 604; ASTM D695; ISO 2577; DIN EN ISO 75-2; DIN EN ISO 11501; DIN 53752

ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-01)

ASTM D5813; ASTM D790; DIN EN ISO 179-1; ISO 8521; DIN EN 1447; DIN EN ISO 604; ASTM D695; ISO 2577; DIN EN ISO 75-2; DIN EN ISO 11501; DIN 53752

ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness

As written on the certificate · Line 7 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1172; ISO 10466; DIN EN 59; DIN EN ISO 868; ASTM D2240; ASTM D2583a; DIN 53370; ASTM F 1306

ASTM D2583Name not checked yet

As written on the certificate · Line 7 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1172; ISO 10466; DIN EN 59; DIN EN ISO 868; ASTM D2240; ASTM D2583a; DIN 53370; ASTM F 1306

ASTM D2990Name not checked yet

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

ASTM D3681Name not checked yet

As written on the certificate · Line 10 (DAKKS D-PL-11222-01-01)

ISO 4901; DIN 53394-2; DIN EN ISO 2114; ISO 5661; ISO 10952; DIN EN 1120; ASTM D3681; DIN EN ISO 175

ASTM D5576Name not checked yet

As written on the certificate · Line 8 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1133 -2; ISO 2431; DIN EN ISO 2555; DIN EN ISO 3219; DIN 53019 -1; ISO 5834 -4; ASTM D 5576; ISO 6721 -4

ASTM D5813Name not checked yet

As written on the certificate · Line 5 (DAKKS D-PL-11222-01-01)

ASTM D5813; ASTM D790; DIN EN ISO 179-1; ISO 8521; DIN EN 1447; DIN EN ISO 604; ASTM D695; ISO 2577; DIN EN ISO 75-2; DIN EN ISO 11501; DIN 53752

ASTM F1306Name not checked yet

As written on the certificate · Line 7 (DAKKS D-PL-11222-01-01)

DIN EN ISO 1172; ISO 10466; DIN EN 59; DIN EN ISO 868; ASTM D2240; ASTM D2583a; DIN 53370; ASTM F 1306

ISO 527 series

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles

As written on the certificate · Line 2 (DAKKS D-PL-11222-01-02)

DVS 2203 -5; DVS 2226 -2; DVS 2226 -3; DIN EN ISO 527 -1; DIN EN ISO 527 -3

ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets

As written on the certificate · Line 2 (DAKKS D-PL-11222-01-02)

DVS 2203 -5; DVS 2226 -2; DVS 2226 -3; DIN EN ISO 527 -1; DIN EN ISO 527 -3

ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

ISO 527-5Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

As written on the certificate · Line 4 (DAKKS D-PL-11222-01-01)

ISO 37; ISO 8513; DIN EN 1393; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DVS 2203-2; ASTM D638; ASTM D2990; DIN EN ISO 178; DIN EN ISO 14125; DIN EN 14130

ISO 11357 series

ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height

As written on the certificate · Line 9 (DAKKS D-PL-11222-01-01)

ISO 6721-5; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-4; DIN EN ISO 11357-6; DIN 53765; DVS 2206-1; DVS 2206-4

ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization

As written on the certificate · Line 9 (DAKKS D-PL-11222-01-01)

ISO 6721-5; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-4; DIN EN ISO 11357-6; DIN 53765; DVS 2206-1; DVS 2206-4

ISO 11357-4Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity

As written on the certificate · Line 9 (DAKKS D-PL-11222-01-01)

ISO 6721-5; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-4; DIN EN ISO 11357-6; DIN 53765; DVS 2206-1; DVS 2206-4

ISO 11357-6Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

As written on the certificate · Line 9 (DAKKS D-PL-11222-01-01)

ISO 6721-5; DIN EN ISO 11357-2; DIN EN ISO 11357-3; DIN EN ISO 11357-4; DIN EN ISO 11357-6; DIN 53765; DVS 2206-1; DVS 2206-4

Scope as published by DAKKS

19 lines

DAKKS

ISO/IEC 17025

Active

D-PL-11222-01-02

View scope

DAKKS

ISO/IEC 17025

Active

D-PL-11222-01-00

View scope

DAKKS

ISO/IEC 17025

Active

D-PL-11222-01-01

View scope

Location

Bergstücken 25, Oststeinbek, 22113, DE

53.55153, 10.16328

Open in Maps

← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on 2026-09-25.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.