Registers refreshed 2026-11-08.See refresh dates
Poland

MHSB Robert Barszcz Usługi Spawalnicze

ul. Sybiraków 3 B, 55-200, Oława, Poland

PCA AB 1761ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
11
PCA certificate
1
Site in our directory
1
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 11 standard numbers and the 11 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO9
ISO 3059Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 16809Non-destructive testing - Ultrasonic thickness determination
ISO 16810Non-destructive testing - Ultrasonic testing - General principles
ISO 16811Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
Other standards2
EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 13018Non-destructive testing - Visual testing - General principles

Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

2 lines
PCA

ISO/IEC 17025

Active

AB 1761

The scope document we hold says it is valid until 2028-10-19.

View on PCA

Accredited scope, certificate AB 1761

LineMethodMatrixRange
1-wyrobów i materiałów konstrukcyjnych/ construction products and materials
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

PCA Zakres akredytacji Nr AB 1761 Scope of accreditation No. AB 1761 ZAKRES AKREDYTACJI LABORATORIUM BADAWCZEGO SCOPE OF ACCREDITATION FOR TESTING LABORATORY Nr/No AB 1761 wydany przez / issued by POLSKIE CENTRUM AKREDYTACJI 01-382 Warszawa, ul. Szczotkarska 42 Wydanie/Issue 4 z/of 05.11.2025 KIEROWNIK DZIAŁU AKREDYTACJI BADAŃ MECHANICZNYCH I FIZYCZNYCH MARIA SZAFRAN Niniejszy dokument jest załącznikiem do Certyfikatu Akredytacji Nr AB 1761 z dnia 12.12.2023 r. Cykl akredytacji od 24.09.2024 r. do 19.10.2028 r. Status akredytacji oraz aktualność zakresu akredytacji można potwierdzić na stronie internetowej PCA www.pca.gov.pl This document is an annex to accreditation certificate No. AB 1761 of 12.12.2023 Accreditation cycle from 24.09.2024 to 19.10.2028 The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl Wydanie nr / Issue No. 4, 05.11.2025 1/3 AB xxx Nazwa i adres / Name and address MHSB ROBERT BARSZCZ USŁUGI SPAWALNICZE Aleja Piastów 4C/7 52-425 Wrocław LABORATORIUM BADAŃ MHSB ul. Sybiraków 3B 55-200 Oława Kod identyfikacyjny / Identification code *) Dziedzina i przedmiot badań / Field of testing and item: - L/8 - Badania nieniszczące wyrobów i materiałów konstrukcyjnych/ Non-destructive tests of construction products and materials Wersja strony/Page version: A *) Kod identyfikacyjny zgodnie z załącznikiem do dokumentu DAB -07 dostępnym na stronie internetowej www.pca.gov.pl / The identification code according to the Annex to document DAB -07, available at PCA website www.pca.gov.pl AB 1761
-
2PN-EN 13018:2016-04; PN-EN ISO 17637:2017-02; PN-EN ISO 3452-1:2021-12; PN-EN ISO 3059:2013-06; PN-EN ISO 9934-1:2017-02; PN-EN ISO 3059:2013-06; PN-EN ISO 17638:2017-01; PN-EN 10160:2001; PN-EN ISO 16810:2014-06; PN-EN ISO 16811:2014-06; PN-EN ISO 17640:2019-01; PN-EN ISO 16809:2019-08Wyroby i materiały metalowe; Złącza spawane materiałów metalowych; Wyroby i materiały metalowe ferromagnetyczne; Złącza spawane materiałów i wyrobów ferromagnetycznych; Wyroby stalowe płaskie1 to 100 mm

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

ul. Sybiraków 3 B, Oława, 55-200, PL

50.94319, 17.29571

Open in Maps
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.